E2V-X8C1-M1 OMRON E2V-X8C1-M1

Slit width: 0.5-mm dia., 1 mm.
Installation procedure: Plug-in type.
Applicable type: E3T-FT1@. Appearance: Shielded, M18.
Sensing distance: 8 mm.
Model: Output configuration: NPN NC.
Long-distance Proximity Sensor.
Long-distance detection at up to 30 mm enables secure mounting,
with reduced problems due to workpiece collisions OMRON E2V-X8C1-M1.
No polarity for easy wiring with DC 2-wire models E2V-X8C1-M1
Cable protector provided as a standard feature. Appearance: Shielded, M12.
Sensing distance: 2 mm.
Output configuration: DC 2-wire, (1)-(4) pin arrangement.
Model: Operation mode, NO.
Chip-immune Inductive.
Proximity Sensor.
Correct operation even with aluminum or iron chips sticking,
to the Sensor.
Only the sensing object is detected OMRON E2V-X8C1-M1.
Pre-wired Smartclick Connector Models also available. Appearance: Standard.
Sensing method: Through-beam type (with slot).
Cable length: 2 m.
Sensing distance: 5 mm (slot width).
configuration Output: Dark-ON.
Indicator mode: No incident light.
Model: NPN output.
Slim, Compact Photomicrosensor.
that is still easy to use.
Compact, thin profile enables dense mounting OMRON E2V-X8C1-M1.
Indicator is visible from both sides.
Wide operating voltage range: 5 to 24 VDC. Appearance: Close mounting.
Sensing method: Throughbeam type(with slot).
Connecting method: Connector(4 poles).
Sensing distance: 5 mm (slot width).
Output configuration: Dark-ON/Light-ON (selectable) OMRON All Metals and Long-distance Types.
Indicator mode: Incident light.
Model: NPN output.
Global Standard Slot-type.
photomicrosensors with 50- to,
100-mA direct switching capacity OMRON All Metals and Long-distance Types.
Series includes models that enable switching between,
dark-ON and light-ON operation.
Response frequency as high as 1 kHz.
Easy operation monitoring with bright light indicator.
Wide operating voltage range: 5 to 24 VDC.
Models in which the light indicator turns ON for dark-ON,
operation are also available OMRON All Metals and Long-distance Types.
A wide range of variations in eight different shapes.
Flexible robot cable is provided as a standard feature. Conneection method: Pre-wired E2V-X8C1-M1.
Cable length: 5 m.
Sensing distance: 600 ± 400 mm.
Model: NPN output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.

Stable measurements for any type of workpiece OMRON E2V-X8C1-M1.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm.