E32-T11U Optical fiber sensor OMRON E32-T11U Specialty: M4 screw fluoride coating, 

Detection mode: diffuse reflection type.
Connection: socket type (M12).
Detection range: red light 100mm.
Output mode: PNP output. Square pole type approach switch direct current three wire type.
Wide visual field of action indicator.
Adjustable fixing hole. Appearance: Shielded, M18.
Sensing distance: 4 mm OMRON E32-T11U.
Output configuration: DC 2-wire, (1)-(4) pin arrangement.
Model: Operation mode, NO E32-T11U
Chip-immune Inductive.
Proximity Sensor.
Correct operation even with aluminum or iron chips sticking,
to the Sensor.
Only the sensing object is detected.
Pre-wired Smartclick Connector Models also available. E32-A02 type: special beam type; liquid level detection,
Specialty: when there is liquid into the light, not susceptible to the effects of bubbles and water droplets,
Bending radius (mm): R4 OMRON E32-T11U.
Fiber element for meeting diversified needsAppearance: Shielded, M12.
Sensing distance: 2 mm.
Model: Operation mode, NO.
Proximity Sensor with a Long Screw Length.
Increased tightening strength. Cable protectors,
provided as a standard feature.
Increased indicator visibility.
A milled section for wrench grip on all models OMRON E32-T11U. Remarks: For DIN track mounting.
High-accuracy Detection of Metal Workpiece Displacement.
Sensor Heads support a wide variety of applications.
Linearity can be adjusted for non-ferrous metals,
such as SUS and aluminum, using the material selection function OMRON Optical fiber sensor.
Simple linearity compensation (teaching).
Easily perform calculation for two Sensors by using a Calculating Unit OMRON Optical fiber sensor.
Prevent mutual interference for up to five Units by using a Calculating Unit. Appearance: Shielded, M30.
Sensing distance: 10 mm.
Output configuration : DC 3-wire, NPN.
Operation mode: NO.
Inductive Profoximity Sensor with.
Chemical-resistant Fluororesin Case.
Housing and mounting are made of Fluororesin resistant to chemicals OMRON Optical fiber sensor.
Maximum sensing distance: 10 mm. Slit width: Width 2 × 10 mm.
Installation procedure: Plug-in type.
Applicable type: E3Z-T@@. Appearance: Unshhielded E32-T11U.
Sensing surface: Front.
Sensing distance: 2.5 mm.
Output configuration: PNP.
Model: Operation mode, NO.
Advanced Performance and Wide.
Range of Selections in a Super.
compact Size.
Only 5.5 × 5.5 mm with a built-in Ammplifier OMRON E32-T11U.
Maximum sensing distance: 2.5 mm. Stable detection even with,
workpiece fluctuations.
Response frequency: 1 kHz.
Low current consumption.