Home
>> Products
>> OMRON
>> Sensor
>> Photoelectric sensor
>> Photoelectric sensor power built-in type
>> E3JK-RN11 2M Built-in Power Supply Photoelectric Sensor OMRON E3JK-RN11 2M
E3JK-RN11 2M Built-in Power Supply Photoelectric Sensor OMRON E3JK-RN11 2M
Brand:
OMRON
Name: Built-in Power Supply Photoelectric Sensor
Model: E3JK-RN11 2M
Power supply voltage: DC.
Sensing method: Retro-reflective without MSR function.
Sensing distance: 7 m[100 mm](When using E39-R1).
Output configu ration: NPN.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models).
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2.5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC).
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available.
...More relevant models >>>>
Name: Built-in Power Supply Photoelectric Sensor
Model: E3JK-RN11 2M
Power supply voltage: DC.
Sensing method: Retro-reflective without MSR function.
Sensing distance: 7 m[100 mm](When using E39-R1).
Output configu ration: NPN.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models).
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2.5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC).
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available.
Appearance: M12.
Sensing distance: 2 mm.
Connection method: M12 Connector Models.
Cable specifications: --.
Operation mode : NC .
Pin arrangement: 1: +V, 3: 0 V,2: Control output.
Applicable connector code: D.
Model: NPN output.
Your Search for Proximity Sensors.
Starts with the World-leading OMRON E3JK-RN11 2M.
Performance and Quality of the E2E.
Standard Sensors for detecting ferrous metals E3JK-RN11 2M
Wide array of variations. Ideal for a variety of applications.
Models with different frequencies are also available to prevent,
mutual interference.
Superior environment resistance with standard cable made of oil,
resistant PVC and sensing surface made of material that resists,
cutting oil.
Useful to help prevent disconnection OMRON E3JK-RN11 2M.
Cable protector provided as a standard feature. Power supply voltage: DC24V.
Control output: NPN output. E3F3-R66 detection methods: Regression reflection type,
Lead extraction: CN M12,
Type: Plastic appearance; NPN output,
Threaded cylindrical photoelectric sensor, built-in amplifier,
Photoelectric sensor with proximity sensor appearance
High anti interference with optoelectronic -IC technologySize: M30 (brass), single distance, non shield type OMRON E3JK-RN11 2M.
Detection distance: 20mm.
Connection mode: lead type (cable length is 2M and 5m two).
Thread length: Standard type.
Output type: NPN.
Action mode NC.
Set up the new standard of the world economy proximity sensor.
OMRON as a pioneer and leader in proximity sensor industry,
Now bring you a new E2B proximity sensor with high performance to price ratio OMRON Built-in Power Supply Photoelectric Sensor OMRON Built-in Power Supply Photoelectric Sensor.
This series of products are complete,
Aimed at reasonable prices to meet customer demand for high quality and high reliability of the sensor.
We have tested the product not only on the protection level (IP67) specific item,
The oil spray test was carried out on the condition of the work site OMRON Built-in Power Supply Photoelectric Sensor.
Simulation test was carried out in the environment of high oil mist concentration. Sensing method:: Convergent reflective E3JK-RN11 2M.
Connection method: Pre-wired (2 m).
Sensing distance : 20 to 35 mm .
function Timer: Without .
Model: NPN output.
Reliable Detection Unaffected by PCB.
Holes or Notches.
High-limit E3S-LS3@ is suittable for incorporation in devices OMRON E3JK-RN11 2M.
Wide-range E3S-LS3@W is ideal for detecting tall components,
mounted on boards.
Timer function models available.
Sensing distance: 2 mm.
Connection method: M12 Connector Models.
Cable specifications: --.
Operation mode : NC .
Pin arrangement: 1: +V, 3: 0 V,2: Control output.
Applicable connector code: D.
Model: NPN output.
Your Search for Proximity Sensors.
Starts with the World-leading OMRON E3JK-RN11 2M.
Performance and Quality of the E2E.
Standard Sensors for detecting ferrous metals E3JK-RN11 2M
Wide array of variations. Ideal for a variety of applications.
Models with different frequencies are also available to prevent,
mutual interference.
Superior environment resistance with standard cable made of oil,
resistant PVC and sensing surface made of material that resists,
cutting oil.
Useful to help prevent disconnection OMRON E3JK-RN11 2M.
Cable protector provided as a standard feature. Power supply voltage: DC24V.
Control output: NPN output. E3F3-R66 detection methods: Regression reflection type,
Lead extraction: CN M12,
Type: Plastic appearance; NPN output,
Threaded cylindrical photoelectric sensor, built-in amplifier,
Photoelectric sensor with proximity sensor appearance
High anti interference with optoelectronic -IC technologySize: M30 (brass), single distance, non shield type OMRON E3JK-RN11 2M.
Detection distance: 20mm.
Connection mode: lead type (cable length is 2M and 5m two).
Thread length: Standard type.
Output type: NPN.
Action mode NC.
Set up the new standard of the world economy proximity sensor.
OMRON as a pioneer and leader in proximity sensor industry,
Now bring you a new E2B proximity sensor with high performance to price ratio OMRON Built-in Power Supply Photoelectric Sensor OMRON Built-in Power Supply Photoelectric Sensor.
This series of products are complete,
Aimed at reasonable prices to meet customer demand for high quality and high reliability of the sensor.
We have tested the product not only on the protection level (IP67) specific item,
The oil spray test was carried out on the condition of the work site OMRON Built-in Power Supply Photoelectric Sensor.
Simulation test was carried out in the environment of high oil mist concentration. Sensing method:: Convergent reflective E3JK-RN11 2M.
Connection method: Pre-wired (2 m).
Sensing distance : 20 to 35 mm .
function Timer: Without .
Model: NPN output.
Reliable Detection Unaffected by PCB.
Holes or Notches.
High-limit E3S-LS3@ is suittable for incorporation in devices OMRON E3JK-RN11 2M.
Wide-range E3S-LS3@W is ideal for detecting tall components,
mounted on boards.
Timer function models available.
...More relevant models >>>>
Last one: OMRON Built-in Power Supply Photoelectric Sensor E3JK-TP14 2M
next one: OMRON Built-in Power Supply Photoelectric Sensor E3JK-RP11 2M
Related download