Home
>> Products
>> OMRON
>> Temperature controller
>> input device
>> E52-P35AF D=32 NETU 1M OMRON E52-P35AF D=32 NETU 1M by new models with ferrules to help reduce wiring work
E52-P35AF D=32 NETU 1M OMRON E52-P35AF D=32 NETU 1M by new models with ferrules to help reduce wiring work
Brand:
OMRON
Name: Temperature Sensor
Model: E52-P35AF D=3.2 NETU 1M
Terminal type: Exposed-lead Models.
Protective tubing diameter D(mm): 3.2 dia.
Protective tubing length L: 35 cm.
Lead wire type: Heat resistive.
Lead wire length M: 1m.
A Wide Variety of High-precision.
Temperature Sensors.
Previous models with M3 screw connections have been joined,
by new models with ferrules to help reduce wiring work.
Ideal for the thermal input devices of Temperature Controllers.
Select from a wide variety of Temperature Sensors according,
to the temperature to be measured, location, and environment,
and also according to the type and shape of the terminal.
...More relevant models >>>>
Name: Temperature Sensor
Model: E52-P35AF D=3.2 NETU 1M
Terminal type: Exposed-lead Models.
Protective tubing diameter D(mm): 3.2 dia.
Protective tubing length L: 35 cm.
Lead wire type: Heat resistive.
Lead wire length M: 1m.
A Wide Variety of High-precision.
Temperature Sensors.
Previous models with M3 screw connections have been joined,
by new models with ferrules to help reduce wiring work.
Ideal for the thermal input devices of Temperature Controllers.
Select from a wide variety of Temperature Sensors according,
to the temperature to be measured, location, and environment,
and also according to the type and shape of the terminal.
Corresponding thermocouple type: K (CA).
Purpose: heat resistant.
Symbol: KCB-2-H.
External: all glass fiber outer foreskin.
Structure (element number / element diameter): 7/0.32.
Temperature range: 0 ~ 150.
Tolerance: plus or minus 100 mu V.
Appearance color: blue.
A variety of high precision temperature sensor series OMRON E52-P35AF D=3.2 NETU 1M.
On the basis of the previous M3 screw,
An additional rod like terminal corresponding to the reduced wiring working hours E52-P35AF D=3.2 NETU 1M
A temperature sensor is used as a thermal sensor for a thermostat.
According to the temperature, place, the surrounding environment to be measured.
Products with various shapes, shapes, lengths and terminals.
Size: 48 x 24mm.
Control output 1: voltage output (SSR driver) OMRON E52-P35AF D=3.2 NETU 1M.
Control output 2:--.
Auxiliary output: -.
Power supply voltage: AC/DC24V.
Terminal type: screw terminal table type (with terminal cover).
Input category: full range multi input.
Heater break, SSR fault detection function: -.
Communication: -.
Event input: -.
A small body of 48 * 24mm specifications on the condensation operation, E5_C series of high performance.
Slender body width 48mm * 24mm * 90mm high depth,
The most suitable for small devices / physical and chemical equipment, etc OMRON E52-P35AF D=3.2 NETU 1M. .
Although the small size, but also through the character of the high 10.5mm white PV display to achieve high recognition OMRON Temperature Sensor.
The terminal stage is adopted to disassemble and assemble the structure, which improves the maintenance performance.
The connection method can be selected from a screw terminal and a PUSH-IN fastening terminal OMRON Temperature Sensor.
High speed sampling of 50ms is realized.
Easy to connect with PLC through no program communication.
The use of electric communication conversion Village (sold separately) connected to the computer after,
No power connection can be set OMRON Temperature Sensor.
It can be easily set by CS-Thermo (sold separately). The main body: terminal type, temperature input type.
Category: control output 1 point type (power supply AC100 ~ 240V).
Shell color: black.
Control output: relay output.
Control mode: standard or heating cooling.
Auxiliary output points: 2 points.
Heater with broken wire, SSR fault, heater over current detection function /ES1B power supply: single phase heater with detection function.
Event entry point: 2.
Transfer output: -.
Communication: -.
48mm general thermostat has been upgraded & function / performance upgrade.
Indicates that the accuracy is increased and the preventive maintenance function is increased,
Further perforrmance improvement E52-P35AF D=3.2 NETU 1M.
E5CN-U (insert type) add analog input and current output type.
Add PV/SV status display function, convenient to check the state of the thermostat (automatic / manual, RUN/STOP, alarm),
Interactivee display PV/SV OMRON E52-P35AF D=3.2 NETU 1M.
Increase the number of control output ON/OFF counting function, can prevent the maintenance of temperature controller internal relay.
Purpose: heat resistant.
Symbol: KCB-2-H.
External: all glass fiber outer foreskin.
Structure (element number / element diameter): 7/0.32.
Temperature range: 0 ~ 150.
Tolerance: plus or minus 100 mu V.
Appearance color: blue.
A variety of high precision temperature sensor series OMRON E52-P35AF D=3.2 NETU 1M.
On the basis of the previous M3 screw,
An additional rod like terminal corresponding to the reduced wiring working hours E52-P35AF D=3.2 NETU 1M
A temperature sensor is used as a thermal sensor for a thermostat.
According to the temperature, place, the surrounding environment to be measured.
Products with various shapes, shapes, lengths and terminals.
Size: 48 x 24mm.
Control output 1: voltage output (SSR driver) OMRON E52-P35AF D=3.2 NETU 1M.
Control output 2:--.
Auxiliary output: -.
Power supply voltage: AC/DC24V.
Terminal type: screw terminal table type (with terminal cover).
Input category: full range multi input.
Heater break, SSR fault detection function: -.
Communication: -.
Event input: -.
A small body of 48 * 24mm specifications on the condensation operation, E5_C series of high performance.
Slender body width 48mm * 24mm * 90mm high depth,
The most suitable for small devices / physical and chemical equipment, etc OMRON E52-P35AF D=3.2 NETU 1M. .
Although the small size, but also through the character of the high 10.5mm white PV display to achieve high recognition OMRON Temperature Sensor.
The terminal stage is adopted to disassemble and assemble the structure, which improves the maintenance performance.
The connection method can be selected from a screw terminal and a PUSH-IN fastening terminal OMRON Temperature Sensor.
High speed sampling of 50ms is realized.
Easy to connect with PLC through no program communication.
The use of electric communication conversion Village (sold separately) connected to the computer after,
No power connection can be set OMRON Temperature Sensor.
It can be easily set by CS-Thermo (sold separately). The main body: terminal type, temperature input type.
Category: control output 1 point type (power supply AC100 ~ 240V).
Shell color: black.
Control output: relay output.
Control mode: standard or heating cooling.
Auxiliary output points: 2 points.
Heater with broken wire, SSR fault, heater over current detection function /ES1B power supply: single phase heater with detection function.
Event entry point: 2.
Transfer output: -.
Communication: -.
48mm general thermostat has been upgraded & function / performance upgrade.
Indicates that the accuracy is increased and the preventive maintenance function is increased,
Further perforrmance improvement E52-P35AF D=3.2 NETU 1M.
E5CN-U (insert type) add analog input and current output type.
Add PV/SV status display function, convenient to check the state of the thermostat (automatic / manual, RUN/STOP, alarm),
Interactivee display PV/SV OMRON E52-P35AF D=3.2 NETU 1M.
Increase the number of control output ON/OFF counting function, can prevent the maintenance of temperature controller internal relay.
...More relevant models >>>>
Last one: OMRON Temperature Sensor E52-P35AF D=3.2 1M
next one: OMRON Temperature Sensor E52-P20AF D=4.8 1M
Related download