FP-DV01-100 Proface DVI-D cable (10 m) FP-DV01-100

Used to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors.
Length: 10 meters. Stop pin, prevent cable connection loose USB cable fastening clip (Type-A*1 USB, Mini-B, each 1 interface), used to adjust the thickness of the mounting panel 2mm gasket (1 pieces).Expansion module for the GP3000 access to the CANopen network and communication with the CANopen master stationExpansion module for the GP3000 access to the CC-Link network and communication with the CC-Link master station (support for intelligent devices)Used for converting the D-Sub 9 pin convex joint to the D-Sub 25 pin concave jointSuitable for A/B+ Type modelsPortable GP2000H series models accessories, RS-422 cable with D-Sub connector (10 meters) Proface FP-DV01-100 Proface FP-DV01-100 FP-DV01-100 Used in a variety of host and man-machine interface for RS-422 connectionReplaceable anti fouling film for protecting screen protective film (5 sheets / cover).Support CANopen from the station module, with a 12 point digital input, 6 point relay output and 2 point transistor PNP output. Up to 7 EX modules can be connected.The main controller is directly connected to the man-machine interface (D-sub 9 pin concave) for multiple connection (n:1) communication Proface FP-DV01-100. 1GB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card Proface DVI-D cable (10 m). When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)Portable GP2000H series models accessories, RS-422 single head cable (10 m) Proface DVI-D cable (10 m). The PC adapter for PCMCIA slot read CF card required.Length: 5 meters.12.1 inches /10.4 inches (STN), the GP installed to the hard panel to provide dust and moisture proof function.12.1 inches, replaced by a host of backlight (1) Proface DVI-D cable (10 m). For 5.7 inch models, for fixing the hooks of the three EX modules.Connector for connecting DC power cordd (5 / set) FP-DV01-100. 7.5 inches /3.8 inches /5.7 inches, used to connect the power cord (5 / sets).Connector for connecting DC power cord. (linear, 5 / set)COM1 interface with the cable for direct connection to the CPU series PLC A13 pin input connectors for HTB and 16 pin output connectors Proface FP-DV01-100. (1 / set)3.8 inches, GP installed to the hard panel to provide dust and moisture proof function.