Home
>> Products
>> MITSUBISHI
>> FX series PLC
>> FX all modules and accessories
>> FX2N module
>> FX2N-1RM-SET MITSUBISHI Rotation angle detection module MITSUBISHI FX2N-1RM-SET
FX2N-1RM-SET MITSUBISHI Rotation angle detection module MITSUBISHI FX2N-1RM-SET
Brand:
MITSUBISHI
Name: Rotation angle detection module
Model: FX2N-1RM-SET
Apply PLC:FX2N (up to 3 units), FX3U (up to 3 units).
Applicable PLC:FX2NC (to FX2NC-CNV-IF, up to 1 units), FX3UC (to FX2NC-CNV-IF or FX3UC-1PS-5V, up to 3 units).
The rotation angle detecting unit is controlled by the mechanical cam switch,
The rotation angle is detected by using the special detector, and the rotation position control with high precision is realized.
Using the setting unit, it is easy to realize the setting and monitoring of the action resolution.
The detection of rotation angle can be accurate to the high accuracy of 415rpm/0.5 degree or 830rpm/1.0 degree unit.
Built without battery to maintain the EEPROM, the maximum can store 8 kinds of procedures.
The cable that is assembled in the device without the brush can be extended to 100m.
When used alone, the CC-LINK type FX2N-32CCL interface module can be used to connect to the CC-LINK system.
Product composition:
FX2N-1RM: the main body of programmable cam switch (with setting panel).
F2-720RSV: no brush splitter.
FX2N-RS-5CAB: splitter cable (5m).
PLC connecting cable (55mm).
...More relevant models >>>>
Name: Rotation angle detection module
Model: FX2N-1RM-SET
Apply PLC:FX2N (up to 3 units), FX3U (up to 3 units).
Applicable PLC:FX2NC (to FX2NC-CNV-IF, up to 1 units), FX3UC (to FX2NC-CNV-IF or FX3UC-1PS-5V, up to 3 units).
The rotation angle detecting unit is controlled by the mechanical cam switch,
The rotation angle is detected by using the special detector, and the rotation position control with high precision is realized.
Using the setting unit, it is easy to realize the setting and monitoring of the action resolution.
The detection of rotation angle can be accurate to the high accuracy of 415rpm/0.5 degree or 830rpm/1.0 degree unit.
Built without battery to maintain the EEPROM, the maximum can store 8 kinds of procedures.
The cable that is assembled in the device without the brush can be extended to 100m.
When used alone, the CC-LINK type FX2N-32CCL interface module can be used to connect to the CC-LINK system.
Product composition:
FX2N-1RM: the main body of programmable cam switch (with setting panel).
F2-720RSV: no brush splitter.
FX2N-RS-5CAB: splitter cable (5m).
PLC connecting cable (55mm).
Use: power cord for basic unit.
Length: 1.0m.
Auxiliary parts for FX3GC and FX3UC. Input and output points: 20 points.
Power supply: AC100-240V.
Input points: 12 points.
Output points: 8 points.
Output form: transistor output (drain).
Power consumption: 20W.
Weight: 0.4KG.
Outline dimension: 75x90x75mm MITSUBISHI FX2N-1RM-SET.
A new application model.
FX3SA is a basic model on the basis of the basic performance of FX1S above the expansion of the expansion of the new model FX2N-1RM-SET
FX3SA is applicable to all kinds of fields of small scale equipment which need to simulate the quantity and function of MODBUS and Ethernet.
Basic models suitable for small scale control.
Compact but powerful,
At the same time, the analog quantity and communication function, etc MITSUBISHI FX2N-1RM-SET. . Length: 3m.
Specification: D-sub 25 pin (male), D-sub 25 pin (male). Input and output points: 48 points.
AC power supply: AC100~240V.
Input points: 24 points.
Output points: 24 points.
Output form: relay output.
Weight: 0.85kg.
Input signal voltage: DC24V.
FX2N series expansion unit
Expansion unit is an input and output expansion device with a built-in power supply MITSUBISHI FX2N-1RM-SET.
As with the basic unit, the extension unit can be connected to a variety of input and output and special extension equipment.
Can connect to FX3GA/FX3G, FX3GE and FX3U.
AC power model, the built-in maximum DC24V 250mA/460mA supply power.
Because all models of FX series are built in high speed counter,
So the high speed control can be realized by the simple procedure MITSUBISHI Rotation angle detection module.
The input of the basic unit is built in the anti jitter filter,
One part as digital filter,
Sensitivity adjustment unit can reach 1ms MITSUBISHI Rotation angle detection module.
Using high speed counter automatically adjusted to the minimum value.
Through the high cost of the built-in positioning function and the expansion function to increase the number of control axis MITSUBISHI Rotation angle detection module.
Extended function expansion board and special adapter,
Data links and communication with external serial devices. Maximum file size: 512MB.
Data form: CSV form.
Weight: 0.3kg.
PLC data can be saved in the form of CF to CSV.
1, can save up to 254, 32767 row of data.
2, save the CSV file can be read through the table count software, and in the form of graphics display, ease of analysis.
PLC can be read through the collected data.
Long time to collect data, through the file FIFO function,
You can automatically generate new files and automatically overwrite the old files, to achieve the contiinuous collection of data FX2N-1RM-SET.
Record the historical data before and after the alarm,
In a file to collect data buffer storage file will play a.
FX3U, FX3UC version 2.61 or more can be used, the need to connect the FX3U when the expansion board MITSUBISHI FX2N-1RM-SET.
The communication function expansion board and the communication special adapter are the same, the communication occupies 1 channels.
Length: 1.0m.
Auxiliary parts for FX3GC and FX3UC. Input and output points: 20 points.
Power supply: AC100-240V.
Input points: 12 points.
Output points: 8 points.
Output form: transistor output (drain).
Power consumption: 20W.
Weight: 0.4KG.
Outline dimension: 75x90x75mm MITSUBISHI FX2N-1RM-SET.
A new application model.
FX3SA is a basic model on the basis of the basic performance of FX1S above the expansion of the expansion of the new model FX2N-1RM-SET
FX3SA is applicable to all kinds of fields of small scale equipment which need to simulate the quantity and function of MODBUS and Ethernet.
Basic models suitable for small scale control.
Compact but powerful,
At the same time, the analog quantity and communication function, etc MITSUBISHI FX2N-1RM-SET. . Length: 3m.
Specification: D-sub 25 pin (male), D-sub 25 pin (male). Input and output points: 48 points.
AC power supply: AC100~240V.
Input points: 24 points.
Output points: 24 points.
Output form: relay output.
Weight: 0.85kg.
Input signal voltage: DC24V.
FX2N series expansion unit
Expansion unit is an input and output expansion device with a built-in power supply MITSUBISHI FX2N-1RM-SET.
As with the basic unit, the extension unit can be connected to a variety of input and output and special extension equipment.
Can connect to FX3GA/FX3G, FX3GE and FX3U.
AC power model, the built-in maximum DC24V 250mA/460mA supply power.
Because all models of FX series are built in high speed counter,
So the high speed control can be realized by the simple procedure MITSUBISHI Rotation angle detection module.
The input of the basic unit is built in the anti jitter filter,
One part as digital filter,
Sensitivity adjustment unit can reach 1ms MITSUBISHI Rotation angle detection module.
Using high speed counter automatically adjusted to the minimum value.
Through the high cost of the built-in positioning function and the expansion function to increase the number of control axis MITSUBISHI Rotation angle detection module.
Extended function expansion board and special adapter,
Data links and communication with external serial devices. Maximum file size: 512MB.
Data form: CSV form.
Weight: 0.3kg.
PLC data can be saved in the form of CF to CSV.
1, can save up to 254, 32767 row of data.
2, save the CSV file can be read through the table count software, and in the form of graphics display, ease of analysis.
PLC can be read through the collected data.
Long time to collect data, through the file FIFO function,
You can automatically generate new files and automatically overwrite the old files, to achieve the contiinuous collection of data FX2N-1RM-SET.
Record the historical data before and after the alarm,
In a file to collect data buffer storage file will play a.
FX3U, FX3UC version 2.61 or more can be used, the need to connect the FX3U when the expansion board MITSUBISHI FX2N-1RM-SET.
The communication function expansion board and the communication special adapter are the same, the communication occupies 1 channels.
...More relevant models >>>>
Last one: MITSUBISHI Positioning module FX2N-20GM
next one: MITSUBISHI RS-232C expansion board FX2N-232-BD
Related download