Home
>> Products
>> MITSUBISHI
>> FX series PLC
>> FX3U series
>> FX3U-80MT/ESS Power consumption: 50W MITSUBISHI FX3U-80MT/ESS
FX3U-80MT/ESS Power consumption: 50W MITSUBISHI FX3U-80MT/ESS
Brand:
MITSUBISHI
Name: PLC
Model: FX3U-80MT/ESS
Max input / output points: 80 points.
Supply voltage: 100 - 240VAC.
Input points: 40 points.
Output points: 40 points.
Output type: Transistor (source).
Power consumption: 50W.
Weight (kg):1.20.
Size (WxHxD) mm:285x90x86.
Built in CPU, power supply, input and output. By using a rich variety of functional extension boards and special adapters,
Can achieve high precision control.
Based on the function of FX2N has been greatly strengthened and enhanced.
High speed operation.
Basic instructions: 0.065 s/ instruction.
Application instruction: 0.642 s/ instruction.
Large capacity memory.
Built in program memory 64000 steps.
Flash memory cartridge with program transfer function.
Authentication。
Corresponding EN and UL/cUL authentication.
Faster and more efficient. Support high speed control and network communication, and have the function of data recording.
High speed, large capacity, multi-function high-end machine.
FX3U supports high speed processing, CC-Link communication, network communication, analog control and advanced positioning system.
Connected to the CC-Link, including the remote I/O, the maximum input and output control points up to 384 points,
Can correspond to a variety of field needs, the use of its scalability and flexibility to expand the scope of application of the control system.
Third generation high function micro programmable controller.
High speed, high efficiency, high performance, large capacity, and new features.
Built in high speed processing and positioning.
Control points: maximum 256 points.
Use CC-Link remote I/O for 384 points.
Auxiliary relay: 7680 points.
Timer: 512 points.
Counter: 235.
Data register: 8000.
Extended register: 32768 point.
Extended file register: 32768.
...More relevant models >>>>
Name: PLC
Model: FX3U-80MT/ESS
Max input / output points: 80 points.
Supply voltage: 100 - 240VAC.
Input points: 40 points.
Output points: 40 points.
Output type: Transistor (source).
Power consumption: 50W.
Weight (kg):1.20.
Size (WxHxD) mm:285x90x86.
Built in CPU, power supply, input and output. By using a rich variety of functional extension boards and special adapters,
Can achieve high precision control.
Based on the function of FX2N has been greatly strengthened and enhanced.
High speed operation.
Basic instructions: 0.065 s/ instruction.
Application instruction: 0.642 s/ instruction.
Large capacity memory.
Built in program memory 64000 steps.
Flash memory cartridge with program transfer function.
Authentication。
Corresponding EN and UL/cUL authentication.
Faster and more efficient. Support high speed control and network communication, and have the function of data recording.
High speed, large capacity, multi-function high-end machine.
FX3U supports high speed processing, CC-Link communication, network communication, analog control and advanced positioning system.
Connected to the CC-Link, including the remote I/O, the maximum input and output control points up to 384 points,
Can correspond to a variety of field needs, the use of its scalability and flexibility to expand the scope of application of the control system.
Third generation high function micro programmable controller.
High speed, high efficiency, high performance, large capacity, and new features.
Built in high speed processing and positioning.
Control points: maximum 256 points.
Use CC-Link remote I/O for 384 points.
Auxiliary relay: 7680 points.
Timer: 512 points.
Counter: 235.
Data register: 8000.
Extended register: 32768 point.
Extended file register: 32768.
Max input / output points: 14 points.
Power supply voltage: 24VDC.
Input points: 8 points.
Output points: 6 points.
Output type: relay.
Power consumption (W): 6.5.
Weight (kg):0.22.
Size (WxHxD) mm:60x90x49.
Host has 10 points (6I/4O), 14 points (8I/6O), 20 points (12I/8O), 30 points (16I/14O) of 4 types MITSUBISHI FX3U-80MT/ESS.
This type of PLC is mainly used in all of the digital input, digital output control point of the device FX3U-80MT/ESS
Can be directly connected to the 220V city power, built-in 8K step EEPROM memory, no battery, easy to maintain.
The series transistor output (MT) of the PLC, can be output 2 100KHz pulse, direct drive servo or stepper motor.
The series PLC can not be brought with the expansion module, but can be installed by the BD board to extend a small amount of I/O MITSUBISHI FX3U-80MT/ESS.
The series 1N through the installation of BD series PLC board, can achieve RS232, RS485, RS422 communication.
All equipment is digital input and output point.
The total I/O points are not more than 30 points, and the input points are less than 16, the output points are less than 14.
Its MT series of PLC can drive 2 way servo or stepper, commonly used in the control system for a simple manipulator MITSUBISHI FX3U-80MT/ESS. Built in CC-LINK/LT master function PLC.
From the scene of the complex wiring operations, such as the liberation of false wiring,
FX3UC basic unit standard, distribution network CC-LINK/LT MITSUBISHI PLC.
The I/O module can be easily controlled by using only the FX3UC basic unit.
The input and output of the program is automatically assigned to the remote I/O station I/O,
So it doesn''t need complicated parameter setting MITSUBISHI PLC.
Has the same function as the CC-LINK/LT master station module.
By installing the high speed, high performance PLC and CC-LINK/LT master function organically combined together to achieve a superior price MITSUBISHI PLC.
FX3UC basic single built in the network with the ppower 0 FX3U-80MT/ESS. 35A.
For the less number of remote I/O, there is no external power adapter, can also be connected to the.
Input and output maximum 256 points.
For the extension of the device connected to the basic unit, the total upp to 256 points can be controlled MITSUBISHI FX3U-80MT/ESS. Length: 2m.
Specification: MR-J. 8 point analog potentiometer function expansion board
(FX1S and FX1N host general).
Power supply voltage: 24VDC.
Input points: 8 points.
Output points: 6 points.
Output type: relay.
Power consumption (W): 6.5.
Weight (kg):0.22.
Size (WxHxD) mm:60x90x49.
Host has 10 points (6I/4O), 14 points (8I/6O), 20 points (12I/8O), 30 points (16I/14O) of 4 types MITSUBISHI FX3U-80MT/ESS.
This type of PLC is mainly used in all of the digital input, digital output control point of the device FX3U-80MT/ESS
Can be directly connected to the 220V city power, built-in 8K step EEPROM memory, no battery, easy to maintain.
The series transistor output (MT) of the PLC, can be output 2 100KHz pulse, direct drive servo or stepper motor.
The series PLC can not be brought with the expansion module, but can be installed by the BD board to extend a small amount of I/O MITSUBISHI FX3U-80MT/ESS.
The series 1N through the installation of BD series PLC board, can achieve RS232, RS485, RS422 communication.
All equipment is digital input and output point.
The total I/O points are not more than 30 points, and the input points are less than 16, the output points are less than 14.
Its MT series of PLC can drive 2 way servo or stepper, commonly used in the control system for a simple manipulator MITSUBISHI FX3U-80MT/ESS. Built in CC-LINK/LT master function PLC.
From the scene of the complex wiring operations, such as the liberation of false wiring,
FX3UC basic unit standard, distribution network CC-LINK/LT MITSUBISHI PLC.
The I/O module can be easily controlled by using only the FX3UC basic unit.
The input and output of the program is automatically assigned to the remote I/O station I/O,
So it doesn''t need complicated parameter setting MITSUBISHI PLC.
Has the same function as the CC-LINK/LT master station module.
By installing the high speed, high performance PLC and CC-LINK/LT master function organically combined together to achieve a superior price MITSUBISHI PLC.
FX3UC basic single built in the network with the ppower 0 FX3U-80MT/ESS. 35A.
For the less number of remote I/O, there is no external power adapter, can also be connected to the.
Input and output maximum 256 points.
For the extension of the device connected to the basic unit, the total upp to 256 points can be controlled MITSUBISHI FX3U-80MT/ESS. Length: 2m.
Specification: MR-J. 8 point analog potentiometer function expansion board
(FX1S and FX1N host general).
...More relevant models >>>>
Last one: 
next one: Related download