Home
>> Products
>> OMRON
>> Relay
>> Solid-state relay
>> Solid state contactor for three-phase motor
>> G3J-T211BL DC12-24 OMRON G3J-T211BL DC12-24
G3J-T211BL DC12-24 OMRON G3J-T211BL DC12-24
Brand:
OMRON
Name: Soft-start/stop Solid State Contactors
Model: G3J-T211BL DC12-24
Number of elements: 3.
Insulation method: Phototriac.
Rated supply voltage: 12 to 24 VDC.
Input method: No-voltage input (open and short circuit input).
Applicable motor: 2.2 kW (11.1 A), 200 to 220 VAC.
Soft-start/stop Function Starts and Stops.
Three-phase Motors Smoothly and.
Economically.
Function like an inverter by holding down the starting current.
Comply with UL, CSA, IEC (400-V models only), and JEM.
requirements.
Mount with screws or to DIN tracks.
Compact monoblock construction for the G3J-T217BL.
(W: 100 × H: 100 × D: 110 mm) with a heat sink.
Snubber circuit and varistor are built-in.
Operation indicator.
...More relevant models >>>>
Name: Soft-start/stop Solid State Contactors
Model: G3J-T211BL DC12-24
Number of elements: 3.
Insulation method: Phototriac.
Rated supply voltage: 12 to 24 VDC.
Input method: No-voltage input (open and short circuit input).
Applicable motor: 2.2 kW (11.1 A), 200 to 220 VAC.
Soft-start/stop Function Starts and Stops.
Three-phase Motors Smoothly and.
Economically.
Function like an inverter by holding down the starting current.
Comply with UL, CSA, IEC (400-V models only), and JEM.
requirements.
Mount with screws or to DIN tracks.
Compact monoblock construction for the G3J-T217BL.
(W: 100 × H: 100 × D: 110 mm) with a heat sink.
Snubber circuit and varistor are built-in.
Operation indicator.
International Standards for G3F Series,
Same Profile as MY Power Relays.
Shape-compatible with mechanical relays.
Certified by UL, CSA, and VDE (model numbers with a suffix of“-VD”).
Socket type, same size as MY Power Relays.
Operation indicator provided to confirm input.
(model numbers with “N” before the suffix) OMRON G3J-T211BL DC12-24. Terminal (wire connection): Push-In Plus Terminal.
Applicable output load: AC load G3J-T211BL DC12-24
Zero cross function: No.
Rated input voltage: AC 200V.
Global standard size,
low profile slim I/O relay with width 6.2 mm,
slim I/O solid state relay.
Realized about 25% lower profile than conventional,
products, contributing to further miniaturization of the,
control panel.
Push-In Plus terminal blocks are used to save wiring work,
in comparison with conventional screw terminals OMRON G3J-T211BL DC12-24.
(Wiring time is reduced by 60%* in comparison with,
traditional screw terminals.).
No screw loosening means maintenance-free application,
realizing high reliability.
Hand-free structure that holds an inserted flat-blade,
screwdriver to achieve easier wiring work for stranded wires.
Screw terminal is also stocked to meet the screw type needs OMRON G3J-T211BL DC12-24.
Mounted relay or solid-state relay has a plug-in terminal.
that is difficult to bend at the time of exchange. Type: input module.
Insulation: photo coupler.
Action display lamp.
Logic supply voltage: DC4 ~ 24V.
Logic supply current: 25mA OMRON Soft-start/stop Solid State Contactors.
Input rated voltage: AC100 ~ 240V.
Logic circuit and load interface.
I/O solid state relay OMRON Soft-start/stop Solid State Contactors.
With the input module (AC, DC), the output module (AC, DC).
Product series, the color of each module to distinguish.
You can confirm the action of SSR by using the action display light.
Between input and output voltage 4000V. Isolation: Phototriac coupler.
Zero cross function: Yes.
Indicator: Yes OMRON Soft-start/stop Solid State Contactors.
Rated output load: 30 A at 200 to 480 VAC.
Rated input voltage: 12 to 24 VDC.
Extremely Thin Relays Integrated with Heat Sinks.
Downsizing achieved through optimum design of heat sink.
Mounting possible via screws or via DIN track G3J-T211BL DC12-24.
Close mounting possible for linking terminals.
(Except for G3PA-260B-VD and G3PA-450B-VD-2.)
Applicable with 3-phase loads.
Replaceable power element cartridges.
Comply witth VDE 0160 (finger protection),
with a dielectric strength of 4,000 V between input and load OMRON G3J-T211BL DC12-24.
Certified by UL, CSA, and VDE (reinforced insulation).
Same Profile as MY Power Relays.
Shape-compatible with mechanical relays.
Certified by UL, CSA, and VDE (model numbers with a suffix of“-VD”).
Socket type, same size as MY Power Relays.
Operation indicator provided to confirm input.
(model numbers with “N” before the suffix) OMRON G3J-T211BL DC12-24. Terminal (wire connection): Push-In Plus Terminal.
Applicable output load: AC load G3J-T211BL DC12-24
Zero cross function: No.
Rated input voltage: AC 200V.
Global standard size,
low profile slim I/O relay with width 6.2 mm,
slim I/O solid state relay.
Realized about 25% lower profile than conventional,
products, contributing to further miniaturization of the,
control panel.
Push-In Plus terminal blocks are used to save wiring work,
in comparison with conventional screw terminals OMRON G3J-T211BL DC12-24.
(Wiring time is reduced by 60%* in comparison with,
traditional screw terminals.).
No screw loosening means maintenance-free application,
realizing high reliability.
Hand-free structure that holds an inserted flat-blade,
screwdriver to achieve easier wiring work for stranded wires.
Screw terminal is also stocked to meet the screw type needs OMRON G3J-T211BL DC12-24.
Mounted relay or solid-state relay has a plug-in terminal.
that is difficult to bend at the time of exchange. Type: input module.
Insulation: photo coupler.
Action display lamp.
Logic supply voltage: DC4 ~ 24V.
Logic supply current: 25mA OMRON Soft-start/stop Solid State Contactors.
Input rated voltage: AC100 ~ 240V.
Logic circuit and load interface.
I/O solid state relay OMRON Soft-start/stop Solid State Contactors.
With the input module (AC, DC), the output module (AC, DC).
Product series, the color of each module to distinguish.
You can confirm the action of SSR by using the action display light.
Between input and output voltage 4000V. Isolation: Phototriac coupler.
Zero cross function: Yes.
Indicator: Yes OMRON Soft-start/stop Solid State Contactors.
Rated output load: 30 A at 200 to 480 VAC.
Rated input voltage: 12 to 24 VDC.
Extremely Thin Relays Integrated with Heat Sinks.
Downsizing achieved through optimum design of heat sink.
Mounting possible via screws or via DIN track G3J-T211BL DC12-24.
Close mounting possible for linking terminals.
(Except for G3PA-260B-VD and G3PA-450B-VD-2.)
Applicable with 3-phase loads.
Replaceable power element cartridges.
Comply witth VDE 0160 (finger protection),
with a dielectric strength of 4,000 V between input and load OMRON G3J-T211BL DC12-24.
Certified by UL, CSA, and VDE (reinforced insulation).
...More relevant models >>>>
Last one: OMRON Soft-start/stop Solid State Contactors G3J-T217BL DC12-24
next one: OMRON Soft-start/stop Solid State Contactors G3J-T205BL DC12-24
Related download