LK Automation Limited
Home >> Products >> OMRON >> Relay >> General relay >> Built in power relay >> G7Z-2A2B-11Z Contact configuration: Relay, DPST-NO/DPST-NC Auxiliary Contact Block, DPST-NO OMRON G7Z-2A2B-11Z Power Relays

G7Z-2A2B-11Z Contact configuration: Relay, DPST-NO/DPST-NC Auxiliary Contact Block, DPST-NO OMRON G7Z-2A2B-11Z Power Relays

Brand: OMRON
Name: Power Relays
Model: G7Z-2A2B-11Z
Classification: Relay with Auxiliary Contact Block.
Structure: 4 poles + 2 poles.
Contact configuration: Relay, DPST-NO/DPST-NC; Auxiliary Contact Block, SPST-NO/SPST-NC.
Rated Voltage: 12, 24 VDC.
Compact Electromagnetic Contactors That.
Switch 40 A at 440 VAC.
One pole carries 40 A.
UL 508 and UL 840 NC contacts (resistive 40 A 480 VAC, 60 Hz, 80,000 operations).
EN 60947-4-1 NC contacts (AC1 40 A 440 VAC, 50/60 Hz, 80,000 operations).
Ideal for supply power to industrial inverters, servo drivers, and other devices,
and switching power to motors and other equipment.
The maximum load capacity of 160 A when using 4-pole parallel connections.
EN 60947-4-1 certification for mirror contact mechanism obtained by combining,
the Relay with an Auxiliary Contact Block.
Conforms to European PV standard (VDE0126).
Approx. 30% less operation noise than a standard electromagnetic contactor.
(Approx. 100 dB reduced to approx. 70 dB.)
Approx. 50% the volume of a standard electromagnetic contactor,
to help downsize control panels.
According to OMRON investigation of IIEC-AC1 50 A specifications.

Isolation: Phototriac coupler.
Zero cross function: NO.
Indicator: NO.
Rated output load: 3 A at 100 to 240 VAC (See note 1.).
Rated input voltage: 5 VDC.
International Standards for G3F Series,
Same Profile as MY Power Relays.
Shape-compatible with mechanical relays.
Certified by UL, CSA, and VDE (model numbers with a suffix of“-VD”) OMRON G7Z-2A2B-11Z.
Socket type, same size as MY Power Relays G7Z-2A2B-11Z
Operation indicator provided to confirm input.
(model numbers with “N” before the suffix). Category: Standard type.
Ontology: UL standard certification type and insert terminal type.
Pole number: 4 pole.
Timing control for 4 pole of high contact reliability.
By way of realizing high quality Tika delay, service life and stability OMRON G7Z-2A2B-11Z.
And MY4 Series in the installation of a swap.
Action display mechanism with action of confirmation.
There are motion display lights built products. Isolation: Photocoupler.
Zero cross function: --.
Indicator: Yes.
Rated output load: 2 A at 5 to 110 VDC.
Rated input voltage: 200/220 VAC.
International Standards for G3F Series,
Same Profile as MY Power Relays OMRON G7Z-2A2B-11Z.
Shape-compatible with mechanical relays.
Certified by UL, CSA, and VDE (model numbers with a suffix of“-VD”).
Socket type, same size as MY Power Relays.
Operation indicator provided to confirm input.
(model numbers with “N” before the suffix) OMRON Power Relays. Type: Conforming to auxiliary power relay specifications.
Contact form: DPDT+DPST-NO.
Cased: Plug-in (octal pins) terminals.
Mechanically Latching Relays Based on the OMRON Power Relays.
MM Power Relay.
Low power consumption due to mechanical latch for economic operation.
Relays with mixed coil specifications can be produced,
(e.g., AC setcoil and DC reset coil).
Operational response fast enough to enable pulse signal power applications OMRON Power Relays.
Ambient operating temperature: –10°C to 55°C. Insulation method: Photovoltage coupler.
Operation Display: Yes(green).
Output(SSR): DC.
Zero cross Function: --.
Rated output Load: 3 A(at 5 to 24 VDC).
Rated input voltage (socket): 12 VDC.
Applicable model: G3RV-SR700/500-A DC12V.
Global standard size,
low profile slim I/O relay with width 6.2 mm,
slim I/O solid state relay.
Realized about 25% lower profile than conventional,
products, contributing to further miniaturization of the,
control panel.
Push-In Plus terminal blocks are used to save wiring work,
in comparison with conventional screw terminals.
(Wiring time is reduced by 60%* in comparison with,
traditional screw terminals.). G7Z-2A2B-11Z.
No screw loosening means maintenance-free application,
realizing high reliability.
Hand-free structure that holds an inserted flat-blade,
screwdriver to achieve easier wiring work for stranded wires.
Screw terminal is also stocked to meet the screw type needs OMRON G7Z-2A2B-11Z.
Mounted relay or solid-state relay has a plug-in terminal.
that is difficult to bend at the time of exchange.


...More relevant models >>>>