GP070-CN10-O RS-422 converter Proface GP070-CN10-O 

15 pin I/O joint (joint Ax1, joint Bx1) and 6 pin I/O connector (joint Cx 1, connector Dx1). Note: joints A and B are different, the joints C and D different.7.4 inches, replace the backlight (1 / set)A veneer, for the GP4000 series back loading models of full flush (white, 1)NETWORK FLEX 64 point DIO connector terminal block, (including 2)Portable GP2000H series models accessories, RS-422 cable with D-Sub connector (3 meters) Proface GP070-CN10-O GP070-CN10-O 5.7 inches, for the protection of the man-machine interface from oil and chemical pollution (5 / set).When the man-machine interface is installed to the hard panel to provide dust and moisture proof function (1)B/B+/C FLEX NETWORK Type connector (5)GP3000H portable slingUSB cable to prevent disconnection of the fastening clip (5 / set)Adapter for EX module (5 / set)Used to prevent accidental operation Proface GP070-CN10-O. Includes 3 mounting screws.Connector for connecting DC power cord (5)Touch screen anti ultraviolet protective film (1 pieces).For connecting GP operation data with RS-422 and power /DIO terminals.13 pin input connectors for HTB and 16 pin output connectors. (1 / set)For 5 Proface GP070-CN10-O. 7 inch models, for fixing the hooks of the three EX modules.Used to display analog RGB (2 channels) on the GP3000Used to connect the 2-Port adapter to GP4000Connector for connecting a serial port (1)For 5.7 inch models, connect the connector to the DIO interface Proface RS-422 converter. For connecting external I/O devices. (5 / set)3 / setsA connector that connects the DIO interface for connecting an external I/O device (5 sets) Proface RS-422 converter. Fitting on NETWORK FLEX interface. Connecting NETWORK FLEX communication cable. (5 / set)Used in a variety of host and man-machine interface for RS-422 connectionSupport CANopen from the station module, with a 12 point digital input, 6 point relay output and 2 point transistor PNP output Proface RS-422 converter. Up to 7 EX modules can be connected.USB interface products: without the base of the tower lights, 3 sections, can be changed color and flasshing display, the configuration of the buzzer GP070-CN10-O. The main controller is connected to the man-machine interface for MPI communicationFor 5.7 inch models, prevent cable loose from the USB cable fastening clip (5 / set).COM1 pin adappter, which is used to connect the communication components that are dedicated to the COM2 interface to the COM1 interface of the man-machine interface Proface GP070-CN10-O.