GP077-CFAD10 Proface PCMCIA CF card adapter Proface GP077-CFAD10

Portable GP2000H series models accessories, RS-422 cable with D-Sub connector (3 meters).Portable GP2000H series models accessories, RS-422 single head cable (3 m).10.4 inches (TFT), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set) Proface GP077-CFAD10. Used to install the human machine interface to the fixed panel (2 / cover) GP077-CFAD10Expansion module for the GP3000 access to the DeviceNet network and communication with the DeviceNet master stationSupport CANopen from the station module, with a 12 point digital input, 6 point relay output and 2 point transistor PNP output. Up to 7 EX modules can be connected.Direct interface Matsushita Electric PLC FP series CPU port Proface GP077-CFAD10. GP4000 series back mounted model of waterproof rubber gasket. (1)Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).Touch panel operation for RGB input modules (Master - from: Mini-B)Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 5 meters. With a fixed screw of the pre USB protection cover, in compliance with IP66F, IP67F, 1/4X Type only indoor use /13 or ATEX certification (5 / set) Proface GP077-CFAD10. The MITSUBISHI Q series PLC is connected to GP, length: 5 m.USB cable to prevent disconnection of the fastening clip (5 / set)Video-Mix module (32000 color, video input x 4 channel, analog RGB input x 1 channel, analog RGB output x 1 channel, VGA/SVGA)Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine Proface PCMCIA CF card adapter Proface PCMCIA CF card adapter. 12.1 inches, replace the backlight (1 / set)Used to prevent accidental operation. Includes 3 mounting screws.For 5.7 inch models, for the 5.7 inch man-machine interface into the LT series (A/B/B+/C/H Type) of the opening.Touch screen anti ultraviolet protective film (1 pieces) Proface PCMCIA CF card adapter. 5.7 inches, replace the backlight (1 / seet)15 inches, replaced by a host of backlight (1) GP077-CFAD10. Used to install the GP3000H series to a commercially available support arm or panel.The three color tower lamp installed on the fixed panel is connected with the human machine innterface through the USB interface Proface GP077-CFAD10. Suitable for A/B+ Type modelsMounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.