GP37W2-WP00-MS Proface Waterproof rubber gasket GP37W2-WP00-MS

Touch screen anti ultraviolet protective film (1 pieces).LT4000M (module type DIO), PNP output, DC24V (host).Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 3 meters. Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceCable for connecting GP3000 to various modules7 Proface GP37W2-WP00-MS GP37W2-WP00-MS 4 inches, installed to provide the function of dust and moistureCOM 2 interface with the cable, for the conversion of the D-Sub 9 pin concave joint to the D-Sub 25 pin convex connector7.4 inches, replace the backlight (1 / set)10.4 inches (TFT), the replacement of the host backlight (1).Converting SIO to RS-422 terminal blockFor the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters Proface GP37W2-WP00-MS. Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter.
Length of 10 meters. Used to connect the SIEMENS S5 PLC series to the host computer interface12.1 inches /10.4 inches (STN), the GP installed to the hard panel to provide dust and moisture proof function Proface GP37W2-WP00-MS. Suitable for A/B+ Type modelsCOM1 pin adapter, which is used to connect the communication components that are dedicated to the COM2 interface to the COM1 interface of the man-machine interface Proface Waterproof rubber gasket. Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter Proface Waterproof rubber gasket.
Length of 5 meters. GP3000H replacement label (5 sheets / set)COM1 interface with the cable for direct connection to the CPU series PLC A10.4 inches (TFT), for the protection of the man-machine interface from oil and chemical pollution (5 / set).Cable for connecting GP3000 to various modulesThe main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module PProface Waterproof rubber gasket GP37W2-WP00-MS. The host controller is connected to the host computer interface, which is used for multiple connection (n:1) communication.COM1 interface with the cable for direct connection to the CPU seriess PLC QA veneer, for the GP4000 series back loading models of full flush (white, 1)Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00) Proface GP37W2-WP00-MS.