Home
>> Products
>> OMRON
>> Control equipments
>> Timer / time switch
>> Analog timer
>> H3DK-HBL Control output: Contact output: SPDT OMRON H3DK-HBL Power OFF-delay Timer
H3DK-HBL Control output: Contact output: SPDT OMRON H3DK-HBL Power OFF-delay Timer
Brand:
OMRON
Name: Power OFF-delay Timer
Model: H3DK-HBL
Operating modes: Power OFF Delay.
Supply voltage: 24 to 48 VAC/DC.
Control output: Contact output: SPDT.
H3DK-H: L Series (time range: 1.0 to 120 s).
Set two time ranges with each Timer, from 0.1 to 12 seconds for,
the S Series and from 1.0 to 120 seconds for the L Series.
...More relevant models >>>>
Name: Power OFF-delay Timer
Model: H3DK-HBL
Operating modes: Power OFF Delay.
Supply voltage: 24 to 48 VAC/DC.
Control output: Contact output: SPDT.
H3DK-H: L Series (time range: 1.0 to 120 s).
Set two time ranges with each Timer, from 0.1 to 12 seconds for,
the S Series and from 1.0 to 120 seconds for the L Series.
Supply voltage: 12 to 24 VDC.
8-digit total counter: Black.
DIN 72 x 36-mm Total Counter/Time Counter with.
Easy-to-read Displays and Water and Oil.
Resistance Equivalent to IP66.
Large, easy-to-read displays: 15-mm-high characters for 6-digit mod,
els; 12-mm-high characters for 8-digit models OMRON H3DK-HBL.
High-visibility, negative transmissive LCD display with built-in red LED,
backlight at low power consumption H3DK-HBL
IP66 with oil resistance and NEMA4 are achieved by unifying the front,
with the casing case and using oil-resistant materials and parts.
Compact (66 mm) body.
Switch 6-digit models between total counter and time counter operation,
Just change a switch setting for either an NPN or PNP input OMRON H3DK-HBL.
Supports both external resetting and manual resetting.
Finger-protection terminal block cover prevents electrical shock and,
conforms to VDE0106, Part 100.
Safety standards: UL, CSA, EMC (EN 61326), CE Marking.
Input type: DC current input.
Output type: relay contact; 1c HH; PASS, H, L, LL: each 1a.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with OMRON H3DK-HBL.
External supply 80mA DC12V.
Power supply voltage: AC/DC24V.
96 (W) * 48 (H * 95mm) some models are not equipped with depth.
The most suitable voltage and current signal simulation, measurement and display, identification of the panel table.
Action determine the color, can switch the green / Red 2 kinds of color display OMRON Power OFF-delay Timer.
Equipped with the sub pressure gauge for monitoring the operation trend OMRON Power OFF-delay Timer.
External event input can be applied to a variety of measurement and identification situations.
Series of DeviceNet type. Input type: high speed response type.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External power supply DC12V80mA.
Output type: linear; current; NPN open collector (HH, H, PASS, L, LL) OMRON Power OFF-delay Timer.
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: ACC100 ~ 240V H3DK-HBL.
High speed, high precision measurement, determine the color display,
Can switch the green / Red 2 kinds of display colors.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied to a variety of measurement and identification situations OMRON H3DK-HBL.
Series of DeviceNet type.
The depth (panel below) is only short size 95mm.
8-digit total counter: Black.
DIN 72 x 36-mm Total Counter/Time Counter with.
Easy-to-read Displays and Water and Oil.
Resistance Equivalent to IP66.
Large, easy-to-read displays: 15-mm-high characters for 6-digit mod,
els; 12-mm-high characters for 8-digit models OMRON H3DK-HBL.
High-visibility, negative transmissive LCD display with built-in red LED,
backlight at low power consumption H3DK-HBL
IP66 with oil resistance and NEMA4 are achieved by unifying the front,
with the casing case and using oil-resistant materials and parts.
Compact (66 mm) body.
Switch 6-digit models between total counter and time counter operation,
Just change a switch setting for either an NPN or PNP input OMRON H3DK-HBL.
Supports both external resetting and manual resetting.
Finger-protection terminal block cover prevents electrical shock and,
conforms to VDE0106, Part 100.
Safety standards: UL, CSA, EMC (EN 61326), CE Marking.
Input type: DC current input.
Output type: relay contact; 1c HH; PASS, H, L, LL: each 1a.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with OMRON H3DK-HBL.
External supply 80mA DC12V.
Power supply voltage: AC/DC24V.
96 (W) * 48 (H * 95mm) some models are not equipped with depth.
The most suitable voltage and current signal simulation, measurement and display, identification of the panel table.
Action determine the color, can switch the green / Red 2 kinds of color display OMRON Power OFF-delay Timer.
Equipped with the sub pressure gauge for monitoring the operation trend OMRON Power OFF-delay Timer.
External event input can be applied to a variety of measurement and identification situations.
Series of DeviceNet type. Input type: high speed response type.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External power supply DC12V80mA.
Output type: linear; current; NPN open collector (HH, H, PASS, L, LL) OMRON Power OFF-delay Timer.
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: ACC100 ~ 240V H3DK-HBL.
High speed, high precision measurement, determine the color display,
Can switch the green / Red 2 kinds of display colors.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied to a variety of measurement and identification situations OMRON H3DK-HBL.
Series of DeviceNet type.
The depth (panel below) is only short size 95mm.
...More relevant models >>>>
Last one: 
next one: Related download