LK Automation Limited
Home >> Products >> OMRON >> Control equipments >> Digital panel table >> Pulse input >> K3HB-PNB-A-DRT1 AC100-240 OMRON Time interval table OMRON K3HB-PNB-A-DRT1 AC100-240

K3HB-PNB-A-DRT1 AC100-240 OMRON Time interval table OMRON K3HB-PNB-A-DRT1 AC100-240

Brand: OMRON
Name: Time interval table
Model: K3HB-PNB-A-DRT1 AC100-240
Input type: NPN/ voltage pulse input type.
Event input terminal 5 points (HOLD, RESET) equipped with.
External power supply DC12V80mA.
Note: K3HB-RPB-A, K3HB-RNB-A is not equipped with event input.
DeviceNet; DeviceNet:--.
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC100 ~ 240V.
Measurement of 2 points through the speed, time, or cycle of the digital time interval table.
Action determine the color, can switch the green / Red 2 kinds of color display.
Measurement of wide range of pulse interval time.
Measuring, calculating and displaying the pulse interval between 2 points.
Pulse interval measurement range, the maximum can be measured from 10ms to 3

Input type: NPN/ voltage pulse input type.
Event input terminal 5 points (S-TMR, HOLD, RESET) is equipped with.
External power 80mA DC12V.
Note: K3HB-RPB-A, K3HB-RNB-A is not equipped with event input.
Linear: current; NPN open collector (HH, H, PASS, L, LL).
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC/DC24V OMRON K3HB-PNB-A-DRT1 AC100-240.
Digital rotating pulse meter with high speed measurement for 50kHz K3HB-PNB-A-DRT1 AC100-240
Action determine the color, can switch the green / Red 2 kinds of color display.
Measurement of 50kHz high speed pulse.
Can rotate the encoder and a variety of ON/OFF pulse signal, up to 50kHzCategory: external supply 100mA DC5V type.
Input type: load sensor, mV input type.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with OMRON K3HB-PNB-A-DRT1 AC100-240.
Linear: current; NPN open collector (HH, H, PASS, L, LL).
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC100 ~ 240V.
To support the sensor input, the pressure, load, torque and weight were measured,
Is an ideal indicator for judging whether an automatic device and a screening device are qualified.
Action determine the color, can switch the green / Red 2 kinds of color display OMRON K3HB-PNB-A-DRT1 AC100-240.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event inputOutput: DPDT.
Supply voltage: 110 VAC (50/60 Hz); 220 VAC (50/60 Hz) OMRON Time interval table.
Timer: S-series; M-series.
Long power OFF-delay times;
S-series: up to 12 seconds,
M-series: up to 12 minutes.
Setting rings (order separately) to enable consistent,
settings and to limit the setting range OMRON Time interval table.
Panel Covers (order separately) to enable various panel designs.
Approved by UL, CSA, CE and CCC. Supply voltage: 24 VDC.
Time-limit contact: 4PDT(Twin contacts).
Short-time range model (0.1 s to 10 min).
Miniature Timer with Multiple Time OMRON Time interval table.
Ranges and Multiple Operating Modes.
Minimizes stock.
Pin configuration compatible with MY Power Relay.
Standard multiple operating modes and multiple time ranges.
Conforms to EN 61812-1 and IEC 60664-1 for Low Voltage,
and EMC Directives. Easy to Use and Easy to Read.
Basic Features.
Character height of 10 mm for better readability.
Operation is simplified by the Up/Down Keys for each digit on 4-digit.
Safety and Reliability.
Power supply circuit and input circuits aree isolated for safety and reliability K3HB-PNB-A-DRT1 AC100-240.
Set value limit function prevents unexpected operation of output devices.
caused by setting mistakes.
Output counter function helps in managing the service life of the Timer oor,
the load OMRON K3HB-PNB-A-DRT1 AC100-240.
Other Features.
Models with instantaneous contact output.
Waterproof, dust-proof structure (UL508 Type 4X and IP66).
Key protection.


...More relevant models >>>>