Home
>> Products
>> OMRON
>> Control equipments
>> Digital panel table
>> Weighing /mV voltage signal input
>> K3HB-VLC-CPEC11 AC/DC24 Load sensor, mV instrument OMRON K3HB-VLC-CPEC11 AC/DC24 Action determine the color, can switch the green / Red 2 kinds of color display
K3HB-VLC-CPEC11 AC/DC24 Load sensor, mV instrument OMRON K3HB-VLC-CPEC11 AC/DC24 Action determine the color, can switch the green / Red 2 kinds of color display
Brand:
OMRON
Name: Load sensor, mV instrument
Model: K3HB-VLC-CPEC11 AC/DC24
Category: external supply 100mA DC5V type.
Input type: load sensor, mV input type.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
Relay contact: H; PASS1c, L: each 1c.
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC/DC24V.
To support the sensor input, the pressure, load, torque and weight were measured,
Is an ideal indicator for judging whether an automatic device and a screening device are qualified.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied to a variety of measurement and identification situations.
...More relevant models >>>>
Name: Load sensor, mV instrument
Model: K3HB-VLC-CPEC11 AC/DC24
Category: external supply 100mA DC5V type.
Input type: load sensor, mV input type.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
Relay contact: H; PASS1c, L: each 1c.
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC/DC24V.
To support the sensor input, the pressure, load, torque and weight were measured,
Is an ideal indicator for judging whether an automatic device and a screening device are qualified.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied to a variety of measurement and identification situations.
Control output: Time-limit SPDT and Instantaneous SPDT.
Supply voltage: 220 VAC (50/60 Hz).
Solid-state Timer with Single Time Range.
and Operating Mode OMRON K3HB-VLC-CPEC11 AC/DC24.
Time range: H3BA-X8HA (0.05 s to 12 h),
H3BA-X8HB (0.3 s to 30 h),
H3BA-X8HC (0.6 s to 60 h).
Operating mode: ON-delay only.
Pin type: 8-pin only. Operation/resetting system: Time-limit operation/self,
resetting/external, resetting (see note 2) K3HB-VLC-CPEC11 AC/DC24
Operation mode: 8 operation modes (selectable)(see note 3).
Terminal: 11-pin round socket.
Time-limit contact: SPDT.
Instantaneous contact: --.
Mounting: Surface mounting/track mounting; Flush mounting OMRON K3HB-VLC-CPEC11 AC/DC24.
DIN-sized (48 x 48, 45 x 75 mm) Timer with.
Digital Setting and LCD Display.
Dual power supplies for free AC/DC.
Eight operation modes selectable with one unit.
Any desired time can be set digitally within a range from 0.1,
seconds to 9,990 hrs.
Four external signal inputs OMRON K3HB-VLC-CPEC111 AC/DC24 mV instrument.
ON/OFF indicator for control output and bar indicator for,
remaining time.
Conforms to UL, CSA, and CE marking. Rated supply voltage: 100 to 240 VAC.
Resetting system (See note.): Self-resetting.
Control output: DPDT contact output (Time-limit output SPDT,
and switchable SPDT(time-limit - instantaneous)) OMRON Load sensor.
Time range: 0.2 s to 12 h (12 s, 120 s, 12 min, 120 min, 12 h).
Large Setting Dial and Moving Pointers Ideal,
for Easy Operation and Monitoring.
Incorporating an easy-to-see large setting dial with moving pointers.
Wide time-setting range of 0 OMRON Load sensor. 2 s to 60 h.
(available through three time-range model types).
Wide AC power supply range (100 to 240 VAC).
IP65 watertight and dust-tight front panel.
Approved by UL and CSA.
Conforms to EN61812-1 and IEC60664-1.
4 kV for Low Voltage, and EMC Directives.
Conforms to EMC standards.
Six-language instruction manual provided OMRON Load sensor.
Programmable contact enables the building of a self-holding,
relay circuit as well as built-in instantaneous contact. (-NS).
Memory retention (-NSR).
FFinger protection terminal block K3HB-VLC-CPEC11 AC/DC24.
Enables easy sequence checks through instantaneous outputs.
for a zero set value at any time range. Operating modes: Star-delta Timer.
Supply voltage: 12 VDC.
Control output: Contact outputs Deltaa circuit: SPDT, Star circuit: SPDT mV instrument.
Set two time ranges between 1 and 120 s with one Timer.
Models with 240 to 440-VAC power supply added to series.
Supply voltage: 220 VAC (50/60 Hz).
Solid-state Timer with Single Time Range.
and Operating Mode OMRON K3HB-VLC-CPEC11 AC/DC24.
Time range: H3BA-X8HA (0.05 s to 12 h),
H3BA-X8HB (0.3 s to 30 h),
H3BA-X8HC (0.6 s to 60 h).
Operating mode: ON-delay only.
Pin type: 8-pin only. Operation/resetting system: Time-limit operation/self,
resetting/external, resetting (see note 2) K3HB-VLC-CPEC11 AC/DC24
Operation mode: 8 operation modes (selectable)(see note 3).
Terminal: 11-pin round socket.
Time-limit contact: SPDT.
Instantaneous contact: --.
Mounting: Surface mounting/track mounting; Flush mounting OMRON K3HB-VLC-CPEC11 AC/DC24.
DIN-sized (48 x 48, 45 x 75 mm) Timer with.
Digital Setting and LCD Display.
Dual power supplies for free AC/DC.
Eight operation modes selectable with one unit.
Any desired time can be set digitally within a range from 0.1,
seconds to 9,990 hrs.
Four external signal inputs OMRON K3HB-VLC-CPEC111 AC/DC24 mV instrument.
ON/OFF indicator for control output and bar indicator for,
remaining time.
Conforms to UL, CSA, and CE marking. Rated supply voltage: 100 to 240 VAC.
Resetting system (See note.): Self-resetting.
Control output: DPDT contact output (Time-limit output SPDT,
and switchable SPDT(time-limit - instantaneous)) OMRON Load sensor.
Time range: 0.2 s to 12 h (12 s, 120 s, 12 min, 120 min, 12 h).
Large Setting Dial and Moving Pointers Ideal,
for Easy Operation and Monitoring.
Incorporating an easy-to-see large setting dial with moving pointers.
Wide time-setting range of 0 OMRON Load sensor. 2 s to 60 h.
(available through three time-range model types).
Wide AC power supply range (100 to 240 VAC).
IP65 watertight and dust-tight front panel.
Approved by UL and CSA.
Conforms to EN61812-1 and IEC60664-1.
4 kV for Low Voltage, and EMC Directives.
Conforms to EMC standards.
Six-language instruction manual provided OMRON Load sensor.
Programmable contact enables the building of a self-holding,
relay circuit as well as built-in instantaneous contact. (-NS).
Memory retention (-NSR).
FFinger protection terminal block K3HB-VLC-CPEC11 AC/DC24.
Enables easy sequence checks through instantaneous outputs.
for a zero set value at any time range. Operating modes: Star-delta Timer.
Supply voltage: 12 VDC.
Control output: Contact outputs Deltaa circuit: SPDT, Star circuit: SPDT mV instrument.
Set two time ranges between 1 and 120 s with one Timer.
Models with 240 to 440-VAC power supply added to series.
...More relevant models >>>>
Last one: OMRON Load sensor, mV instrument K3HB-VLC-E1 AC/DC24
next one: OMRON Load sensor, mV instrument K3HB-VLC-CPEC21 AC/DC24
Related download