LK Automation Limited
Home >> Products >> OMRON >> Control equipments >> Digital panel table >> Voltage / current input >> K3HB-XAD-A-DRT1 AC100-240 Voltage and current panel meter OMRON K3HB-XAD-A-DRT1 AC100-240 Output type: DeviceNet - DeviceNet 

K3HB-XAD-A-DRT1 AC100-240 Voltage and current panel meter OMRON K3HB-XAD-A-DRT1 AC100-240 Output type: DeviceNet - DeviceNet 

Brand: OMRON
Name: Voltage and current panel meter
Model: K3HB-XAD-A-DRT1 AC100-240
Input type: DC current input.
Output type: DeviceNet; -; DeviceNet.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External supply 80mA DC12V.
Power supply voltage: AC100 ~ 240V.
96 (W) * 48 (H * 95mm) depth
Some models are not equipped with.
The most suitable voltage and current signal simulation, measurement and display, identification of the panel table.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied to a variety of measurement and identification situations.
Series of DeviceNet type.

DIN Track Mounted, Standard 17.5-mm Width Timer Range.
A wide AC/DC power supply range (24 to 230 VAC/ 24 to 48 VDC) reduces the number, of timer models kept in stock. (24 to 230 VAC/VDC with H3DS-XL@).
Smart Dial/Selector-locking Mechanism: Prevents the dials and selectors on the, Timer’s front panel from being inadvertently op OMRON K3HB-XAD-A-DRT1 AC100-240.
erated or being operated without authorization K3HB-XAD-A-DRT1 AC100-240 The lock can only be unlocked and, locked with an optional pen-type Lock Key.
Screw-Less Clamp type available. (H3DS-@LC).
Sticker provided for easy timer identification and management.
Terminal clamp left open when delivered (screw terminal type).
Finger protection terminal block to meet VDE0106/P100.
Enables easy sequence checks through instantaneous outputs for a zero,
set value at any time range OMRON K3HB-XAD-A-DRT1 AC100-240.
Incorporates environment-friendly, cadmium-free contacts.
Conforms to EN61812-1 and IEC60664-1 4 kV/2 for Low Voltage, and EMC Directives. Operating modes: Power OFF Delay.
Supply voltage: 200 to 240 VAC.
Control output: Contact output: SPDT.
H3DK-H: S Series (time range: 0.1 to 12 s).
Set two time ranges with each Timer, from 0 OMRON K3HB-XAD-A-DRT1 AC100-240. 1 to 12 seconds for,
the S Series and from 1.0 to 120 seconds for the L Series. Operating modes: Power OFF Delay.
Supply voltage: 100 to 120 VAC.
Control output: Contact output: SPDT.
H3DK-H: S Series (time range: 0 OMRON Voltage and current panel meter. 1 to 12 s).
Set two time ranges with each Timer, from 0.1 to 12 seconds for,
the S Series and from 1.0 to 120 seconds for the L Series OMRON Voltage and current panel meter. Input type: DC voltage/current.
Supply voltage: 100 to 240 VAC.
Comparative Output Model: 2 relay contact outputs (SPST-NO).
Highly Visible LCD Display with 2-color,
(Red and Green) LEDs.
Multi-range DC voltage/current input.
Front-panel key operation for easy setting.
Average processing function suppresses flicker OMRON Voltage and current panel meter.
Scaling, front-panel forced-zzero, zero-limit functions K3HB-XAD-A-DRT1 AC100-240.
Easy confirmation of max/min display.
Short 80-mm depth (measured from edge of face plate).
Finger protective cover (standard equipment) guards against electric shock.
Water- and dust-pproof NEMA4X (IP66 equivalent) front panel OMRON K3HB-XAD-A-DRT1 AC100-240.
Recognized to U.S. and Canadian requirements under the Component,
Recognition Program of UL.
CE marking.


...More relevant models >>>>