Home
>> Products
>> OMRON
>> Control equipments
>> Digital panel table
>> Voltage / current input
>> K3HB-XVA-BCD1 AC/DC24 Voltage and current panel meter Power supply voltage: AC/DC24V OMRON K3HB-XVA-BCD1 AC/DC24
K3HB-XVA-BCD1 AC/DC24 Voltage and current panel meter Power supply voltage: AC/DC24V OMRON K3HB-XVA-BCD1 AC/DC24
Brand:
OMRON
Name: Voltage and current panel meter
Model: K3HB-XVA-BCD1 AC/DC24
Type of input: AC voltage input.
Output type: BCD+ transistor; -; NPN open collector (5 bit output +HH, PASS, L, LL).
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External supply 80mA DC12V.
Power supply voltage: AC/DC24V.
96 (W) * 48 (H * 95mm) depth
Some models are not equipped with.
The most suitable voltage and current signal simulation, measurement and display, identification of the panel table.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied to a variety of measurement and identification situations.
Devi
...More relevant models >>>>
Name: Voltage and current panel meter
Model: K3HB-XVA-BCD1 AC/DC24
Type of input: AC voltage input.
Output type: BCD+ transistor; -; NPN open collector (5 bit output +HH, PASS, L, LL).
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External supply 80mA DC12V.
Power supply voltage: AC/DC24V.
96 (W) * 48 (H * 95mm) depth
Some models are not equipped with.
The most suitable voltage and current signal simulation, measurement and display, identification of the panel table.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied to a variety of measurement and identification situations.
Devi
Supply voltage: 24 VAC; 12, 24 VDC.
Time-limit contact: DPST-NO.
Long-time range model (0.1 min to 10 h).
Ultra-slim Timer for G2R Relay Socket.
Pin configuration compatible with G2R Relay and mounts to the,
P2R/P2RF Socket.
Standard multiple time ranges and multiple operating modes.
Conforms to EN61812-1 and IEC60664-1 4 kV/2 for Low Volt,
age, and EMC Directives OMRON K3HB-XVA-BCD1 AC/DC24 K3HB-XVA-BCD1 AC/DC24 Type of input: AC voltage input.
Output type: relay contact; 1c HH; PASS, H, L, LL: each 1a.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External supply 80mA DC12V.
Power supply voltage: AC100 ~ 240V.
96 (W) * 48 (H * 95mm) some models are not equipped with depth.
The most suitable voltage and current signal simulation, measurement and display, identification of the panel table OMRON K3HB-XVA-BCD1 AC/DC24.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied to a variety of measurement and identification situations.
DeviceNet type systemProject: Japanese specification model OMRON K3HB-XVA-BCD1 AC/DC24.
Installation method: surface /DIN rail installation (agreement) longitudinal.
All day control operation is simple
Can be carried out on the choice of a few weeks of action. (but only 1 of the week moves and all week specific dates can be set)
ON/OFF time setting has 24 steps OMRON Voltage and current panel meter.
Consistent with CE markers. Through the UL, CSA standard certification.
Rest day function can be easily carried out on holidays, such as the setting of a sudden break OMRON Voltage and current panel meter.
Test mode function can easily confirm the program.
Can also be used to deal with a sudden change in the way of a semi automatic work.
The pulse action can cope with daylight saving time.
All models are equipped with finger protection function OMRON Voltage and current panel meter.
Product series contains embedded installation, surface mount, the size of the agreement and other ways.
The same setting can be done with the timer action. Input type: PNP input type.
Event input terminal 5 points (HOLD, RESET) equipped with.
External power supply DC12V80mA.
Note: K3HB-RPB-A, K3HB-RNB-A is not equipped with event input.
Linear: current; NPN open collector (HH, H, PASS, L, LL).
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC/DC24V.
Measureement of 2 points through the speed, time, or cycle of the digital time interval table K3HB-XVA-BCD1 AC/DC24.
Action determine the color, can switch the green / Red 2 kinds of color display.
Measurement of wide range of pulse interval time.
Measuring, calculating and displaying the pulse interval between 2 points OMRON K3HB-XVA-BCD1 AC/DC24.
Pulse interval measurement range, the maximum can be measured from 10ms to
Time-limit contact: DPST-NO.
Long-time range model (0.1 min to 10 h).
Ultra-slim Timer for G2R Relay Socket.
Pin configuration compatible with G2R Relay and mounts to the,
P2R/P2RF Socket.
Standard multiple time ranges and multiple operating modes.
Conforms to EN61812-1 and IEC60664-1 4 kV/2 for Low Volt,
age, and EMC Directives OMRON K3HB-XVA-BCD1 AC/DC24 K3HB-XVA-BCD1 AC/DC24 Type of input: AC voltage input.
Output type: relay contact; 1c HH; PASS, H, L, LL: each 1a.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External supply 80mA DC12V.
Power supply voltage: AC100 ~ 240V.
96 (W) * 48 (H * 95mm) some models are not equipped with depth.
The most suitable voltage and current signal simulation, measurement and display, identification of the panel table OMRON K3HB-XVA-BCD1 AC/DC24.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied to a variety of measurement and identification situations.
DeviceNet type systemProject: Japanese specification model OMRON K3HB-XVA-BCD1 AC/DC24.
Installation method: surface /DIN rail installation (agreement) longitudinal.
All day control operation is simple
Can be carried out on the choice of a few weeks of action. (but only 1 of the week moves and all week specific dates can be set)
ON/OFF time setting has 24 steps OMRON Voltage and current panel meter.
Consistent with CE markers. Through the UL, CSA standard certification.
Rest day function can be easily carried out on holidays, such as the setting of a sudden break OMRON Voltage and current panel meter.
Test mode function can easily confirm the program.
Can also be used to deal with a sudden change in the way of a semi automatic work.
The pulse action can cope with daylight saving time.
All models are equipped with finger protection function OMRON Voltage and current panel meter.
Product series contains embedded installation, surface mount, the size of the agreement and other ways.
The same setting can be done with the timer action. Input type: PNP input type.
Event input terminal 5 points (HOLD, RESET) equipped with.
External power supply DC12V80mA.
Note: K3HB-RPB-A, K3HB-RNB-A is not equipped with event input.
Linear: current; NPN open collector (HH, H, PASS, L, LL).
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC/DC24V.
Measureement of 2 points through the speed, time, or cycle of the digital time interval table K3HB-XVA-BCD1 AC/DC24.
Action determine the color, can switch the green / Red 2 kinds of color display.
Measurement of wide range of pulse interval time.
Measuring, calculating and displaying the pulse interval between 2 points OMRON K3HB-XVA-BCD1 AC/DC24.
Pulse interval measurement range, the maximum can be measured from 10ms to
...More relevant models >>>>
Last one: OMRON Voltage and current panel meter K3HB-XVA-T11 AC/DC24
next one: OMRON Voltage and current panel meter K3HB-XVA-FLK1AT11 AC/DC24
Related download