Home
>> Products
>> MITSUBISHI
>> Servo driver/Servo motor
>> MR-E series
>> MITSUBISHI HF-SN202J-S100 Encoder resolution: 131072p/r MITSUBISHI HF-SN202J-S100
MITSUBISHI HF-SN202J-S100 Encoder resolution: 131072p/r MITSUBISHI HF-SN202J-S100
Brand:
MITSUBISHI
Name: General motors for MR-JE and MR-E
Model: HF-SN202J-S100
Type: HF-SN servo motor, medium inertia power.
Rated output power: 2.0kw.
Rated speed: 2000r/min.
Electromagnetic brake: there.
Oil seal: have.
Encoder resolution: 131072p/r.
S100 representative: Super MR-E special motor.
KH003 special mark for Super MR-E.
High performance and easy to operate, reduce work load.
Enhanced system cost performance.
High performance, high precision positioning (servo motor encoder resolution: 131072).
High response.
Suppression of vibration by adaptive vibration suppression control.
Using personal computer and servo setup software to optimize tuning.
Has 2 types of interfaces:
Position control and speed control with pulse train interface.
The analog input interface is used for speed control and torque control.
Wide use.
Machining equipment and machine tool feed.
Used for food, packaging equipment and feeding device.
For textile machinery, etc..
Can improve the performance of equipment.
Servo amplifier terminals are used to reduce the required wiring time.
The connector is located in front of the servo amplifier, which is convenient for cable connection.
The gain adjustment can be easily carried out by the real-time automatic tuning function.
...More relevant models >>>>
Name: General motors for MR-JE and MR-E
Model: HF-SN202J-S100
Type: HF-SN servo motor, medium inertia power.
Rated output power: 2.0kw.
Rated speed: 2000r/min.
Electromagnetic brake: there.
Oil seal: have.
Encoder resolution: 131072p/r.
S100 representative: Super MR-E special motor.
KH003 special mark for Super MR-E.
High performance and easy to operate, reduce work load.
Enhanced system cost performance.
High performance, high precision positioning (servo motor encoder resolution: 131072).
High response.
Suppression of vibration by adaptive vibration suppression control.
Using personal computer and servo setup software to optimize tuning.
Has 2 types of interfaces:
Position control and speed control with pulse train interface.
The analog input interface is used for speed control and torque control.
Wide use.
Machining equipment and machine tool feed.
Used for food, packaging equipment and feeding device.
For textile machinery, etc..
Can improve the performance of equipment.
Servo amplifier terminals are used to reduce the required wiring time.
The connector is located in front of the servo amplifier, which is convenient for cable connection.
The gain adjustment can be easily carried out by the real-time automatic tuning function.
MITSUBISHI motor universal AC servo amplifier MELSERVO-J3 series.
Rated output: 22.0kw.
Interface type: CC-Link communication type (built-in positioning function).
Power specification: three phase AC200V.
Positioning operation by setting position and rotational speed data in the positioning table and receiving the start signal from the main controller MITSUBISHI HF-SN202J-S100.
The setting of the position and speed of the positioning table, as well as the start and stop operation can be completed through CC-Link communication HF-SN202J-S100
By using the MR-J3-D01 extension IO unit, the DI/O instruction can be used to select and locate the table.
(CC-Link can not be used for MR-J3-D01 communications).
With built-in positioning function of the servo amplifier, can be set through the CC-Link communications and speed data MITSUBISHI HF-SN202J-S100. (corresponding to the CC-Link version: Ver.1.10)
Can be achieved through the CC-Link communications to start, stop and monitoring and other operations.
Serial communication reduce wiring.
Distributed servo control system can be built by CC-Link communication.
The parameters of unit MR-PRU03 (optional) the parameter setting, operation and monitoring more convenient MITSUBISHI HF-SN202J-S100.
The servo amplifier can be used for speed control operation.
When the two stations are occupied, the speed can be set directly by the remote register. A power supply connector set for HC-KFS; HC-MFS; 3000r/min HC-UFS servo motor MITSUBISHI Servo motor without oil seal.
For MR-J2S-11KA (4) MR-J2S-22KA to (4). Motor series: low inertia, medium power.
Rated output power: 37 MITSUBISHI Servo motor without oil seal. 0kw.
Rated speed: 1500r/min.
Whether to take the brake: No.
Shaft end: Standard (straight).
Voltage: 400V type.
Protection level: IP65 (IP67).
Features: low inertia from low speed to high speed, three modes can be selected, suitable for different application range. As a standard port, 30KW or greater power is suitable for flange (type) installation and support foot mounting MITTSUBISHI Servo motor without oil seal HF-SN202J-S100.
Application example: injection molding machine, semiconductor manufacturing equipment, large conveyor machinery.
High resolution encoder 131072p/rev (17 bit).
The encoder with high reesolution ensures excellent performance and stability at low speed MITSUBISHI HF-SN202J-S100.
All motor dimensions are the same as before and all are compatible with the wiring.
Rated output: 22.0kw.
Interface type: CC-Link communication type (built-in positioning function).
Power specification: three phase AC200V.
Positioning operation by setting position and rotational speed data in the positioning table and receiving the start signal from the main controller MITSUBISHI HF-SN202J-S100.
The setting of the position and speed of the positioning table, as well as the start and stop operation can be completed through CC-Link communication HF-SN202J-S100
By using the MR-J3-D01 extension IO unit, the DI/O instruction can be used to select and locate the table.
(CC-Link can not be used for MR-J3-D01 communications).
With built-in positioning function of the servo amplifier, can be set through the CC-Link communications and speed data MITSUBISHI HF-SN202J-S100. (corresponding to the CC-Link version: Ver.1.10)
Can be achieved through the CC-Link communications to start, stop and monitoring and other operations.
Serial communication reduce wiring.
Distributed servo control system can be built by CC-Link communication.
The parameters of unit MR-PRU03 (optional) the parameter setting, operation and monitoring more convenient MITSUBISHI HF-SN202J-S100.
The servo amplifier can be used for speed control operation.
When the two stations are occupied, the speed can be set directly by the remote register. A power supply connector set for HC-KFS; HC-MFS; 3000r/min HC-UFS servo motor MITSUBISHI Servo motor without oil seal.
For MR-J2S-11KA (4) MR-J2S-22KA to (4). Motor series: low inertia, medium power.
Rated output power: 37 MITSUBISHI Servo motor without oil seal. 0kw.
Rated speed: 1500r/min.
Whether to take the brake: No.
Shaft end: Standard (straight).
Voltage: 400V type.
Protection level: IP65 (IP67).
Features: low inertia from low speed to high speed, three modes can be selected, suitable for different application range. As a standard port, 30KW or greater power is suitable for flange (type) installation and support foot mounting MITTSUBISHI Servo motor without oil seal HF-SN202J-S100.
Application example: injection molding machine, semiconductor manufacturing equipment, large conveyor machinery.
High resolution encoder 131072p/rev (17 bit).
The encoder with high reesolution ensures excellent performance and stability at low speed MITSUBISHI HF-SN202J-S100.
All motor dimensions are the same as before and all are compatible with the wiring.
...More relevant models >>>>
Last one: MITSUBISHI General motors for MR-JE and MR-E HF-SN152J-S100
next one: MITSUBISHI General motors for MR-JE and MR-E HF-SN302J-S100
Related download