Home
>> Products
>> MITSUBISHI
>> Servo driver/Servo motor
>> MR-J2M series
>> MR-J2M-BU8 MITSUBISHI Low inertia medium capacity motor MR-J2M-BU8
MR-J2M-BU8 MITSUBISHI Low inertia medium capacity motor MR-J2M-BU8
Brand:
MITSUBISHI
Name: Multi axis servo amplifier substrate
Model: MR-J2M-BU8
MR-J2M multi axis servo amplifier substrate.
Groove position: 8.
There are many methods for the classification of servo system, and there are three kinds of common classification methods.
(1) classification of parameters of controlled parameters.
(2) according to the type of drive components.
Servo control system according to the type of control components can be divided into mechanical and electrical servo system, hydraulic servo system (hydraulic control system) and pneumatic servo system.
(3) according to the control principle.
Servo system can be divided into open loop servo control system, closed loop control servo system and semi closed loop servo system.
...More relevant models >>>>
Name: Multi axis servo amplifier substrate
Model: MR-J2M-BU8
MR-J2M multi axis servo amplifier substrate.
Groove position: 8.
There are many methods for the classification of servo system, and there are three kinds of common classification methods.
(1) classification of parameters of controlled parameters.
(2) according to the type of drive components.
Servo control system according to the type of control components can be divided into mechanical and electrical servo system, hydraulic servo system (hydraulic control system) and pneumatic servo system.
(3) according to the control principle.
Servo system can be divided into open loop servo control system, closed loop control servo system and semi closed loop servo system.
Servo motor series: ultra low inertia, small capacity.
Rated output: 0.4kw.
Rated speed: 3000r/min.
Electromagnetic brake: incidental.
Power supply: 200V.
The rated speed is 3000r/min, the maximum speed is 6000r/min.
The maximum torque of 350% of the rated torque, high torque in the field of high rotation, only to support the HG-KR series products MITSUBISHI MR-J2M-BU8.
Built in absolute position encoder with high resolution MR-J2M-BU8
Standard high resolution absolute position encoder (4194304p/rev (22bit)).
To achieve a higher accuracy of the positioning function.
Improve the environmental performance of HG-KR, HG-MR, HG-RR, HG-UR series of products using IP65. MITSUBISHI general purpose AC servo amplifier MELSERVO-J2-Super series MITSUBISHI MR-J2M-BU8.
Rated output: 0.4kw.
Built in program operation.
Voltage: 3 phase AC200VAC or single phase AC230V.
Super function, excellent performance.
High performance CPU integration, greatly improve product responsiveness.
Due to the application of high performance CPU, so that the response can be greatly improved.
Speed loop frequency response increased to more than 550HZ.
MR-J2-Super series is the best device for high speed positioning applications MITSUBISHI MR-J2M-BU8.
Easy adjustment.
Model adaptive control / advanced real time automatic tuning. Motor power adapter kit; HF-SP51; 81; 102; 152; 52;
1024; 524; 1524
HF-JP53; 73; 103; 153; 203; 534;
734; 1034; 1534; 2034;
5034; 3534Servo motor series: low inertia, low power MITSUBISHI Low inertia medium capacity motor.
Rated output: 0.05kw.
Rated speed: 3000r/min.
Electromagnetic brake: with.
Shaft end specification: Standard (straight axis) MITSUBISHI Low inertia medium capacity motor.
Features: low inertia is widely used in general machinery.
IP level: IP65.
Application example:
1, belt drive.
2, industrial robots.
3, assembly machinery.
4, industrial sewing machine.
5, X-Y working table.
6, food processing machinery.
7, semiconductor manufacturing equipment MITSUBISHI Low inertia medium capacity motor.
8, knitting machine and embroidery machine.
Rotary servo motor.
Numerous motor series and wide motor power range can be used to meet different applications.
The protection level of the HF-KP/HF-MP/HC-LP/HC-RP/HC-UP servo motor to improve the environmental safety is IP65 (except the shaft part). Motor series: low inertia, medium capacity.
Rated output power: 15.0kw.
Rated speed: 1500rpm.
With the brake: without.
Shaft end: straight shaft.
The rotor of the servo motorr is a permanent magnet, which is controlled by the U/V/W,
The rotor rotates under the action of the magnetic field, and the encoder feedback signal of the motor is given to the driver,
According to the feedback value and the ttarget value, the driver adjusts the rotation angle of the rotor MITSUBISHI MR-J2M-BU8 MR-J2M-BU8.
Accuracy of the servo motor depends on the accuracy of the encoder (number of lines).
Rated output: 0.4kw.
Rated speed: 3000r/min.
Electromagnetic brake: incidental.
Power supply: 200V.
The rated speed is 3000r/min, the maximum speed is 6000r/min.
The maximum torque of 350% of the rated torque, high torque in the field of high rotation, only to support the HG-KR series products MITSUBISHI MR-J2M-BU8.
Built in absolute position encoder with high resolution MR-J2M-BU8
Standard high resolution absolute position encoder (4194304p/rev (22bit)).
To achieve a higher accuracy of the positioning function.
Improve the environmental performance of HG-KR, HG-MR, HG-RR, HG-UR series of products using IP65. MITSUBISHI general purpose AC servo amplifier MELSERVO-J2-Super series MITSUBISHI MR-J2M-BU8.
Rated output: 0.4kw.
Built in program operation.
Voltage: 3 phase AC200VAC or single phase AC230V.
Super function, excellent performance.
High performance CPU integration, greatly improve product responsiveness.
Due to the application of high performance CPU, so that the response can be greatly improved.
Speed loop frequency response increased to more than 550HZ.
MR-J2-Super series is the best device for high speed positioning applications MITSUBISHI MR-J2M-BU8.
Easy adjustment.
Model adaptive control / advanced real time automatic tuning. Motor power adapter kit; HF-SP51; 81; 102; 152; 52;
1024; 524; 1524
HF-JP53; 73; 103; 153; 203; 534;
734; 1034; 1534; 2034;
5034; 3534Servo motor series: low inertia, low power MITSUBISHI Low inertia medium capacity motor.
Rated output: 0.05kw.
Rated speed: 3000r/min.
Electromagnetic brake: with.
Shaft end specification: Standard (straight axis) MITSUBISHI Low inertia medium capacity motor.
Features: low inertia is widely used in general machinery.
IP level: IP65.
Application example:
1, belt drive.
2, industrial robots.
3, assembly machinery.
4, industrial sewing machine.
5, X-Y working table.
6, food processing machinery.
7, semiconductor manufacturing equipment MITSUBISHI Low inertia medium capacity motor.
8, knitting machine and embroidery machine.
Rotary servo motor.
Numerous motor series and wide motor power range can be used to meet different applications.
The protection level of the HF-KP/HF-MP/HC-LP/HC-RP/HC-UP servo motor to improve the environmental safety is IP65 (except the shaft part). Motor series: low inertia, medium capacity.
Rated output power: 15.0kw.
Rated speed: 1500rpm.
With the brake: without.
Shaft end: straight shaft.
The rotor of the servo motorr is a permanent magnet, which is controlled by the U/V/W,
The rotor rotates under the action of the magnetic field, and the encoder feedback signal of the motor is given to the driver,
According to the feedback value and the ttarget value, the driver adjusts the rotation angle of the rotor MITSUBISHI MR-J2M-BU8 MR-J2M-BU8.
Accuracy of the servo motor depends on the accuracy of the encoder (number of lines).
...More relevant models >>>>
Last one: MITSUBISHI Multi axis servo amplifier substrate MR-J2M-BU6
next one: MITSUBISHI Multi axis servo amplifier expansion unit MR-J2M-D01
Related download