Home
>> Products
>> OMRON
>> Relay
>> General relay
>> Special action relay
>> MYA-LB12 OMRON MYA-LB12 Category: with fault recovery after the reset confirmation circuit
MYA-LB12 OMRON MYA-LB12 Category: with fault recovery after the reset confirmation circuit
Brand:
OMRON
Name: Contact alarm relay circuit unit
Model: MYA-LB12
Action mode alarm contact: lock, B contact.
Category: with fault recovery after the reset confirmation circuit.
Relay number: 3.
Relay circuit unit suitable for centralized alarm device of various control circuits.
MYA combination of multiple MY4 micro power relay, with all kinds of alarm function.
Small, socket type, so it can effectively use the space, repair, maintenance and other operation is simple and convenient.
By use, roughly divided into 4 types, to adapt to the full range of models.
Lloyd standard certified products (MYA-LA12, -LB12).
...More relevant models >>>>
Name: Contact alarm relay circuit unit
Model: MYA-LB12
Action mode alarm contact: lock, B contact.
Category: with fault recovery after the reset confirmation circuit.
Relay number: 3.
Relay circuit unit suitable for centralized alarm device of various control circuits.
MYA combination of multiple MY4 micro power relay, with all kinds of alarm function.
Small, socket type, so it can effectively use the space, repair, maintenance and other operation is simple and convenient.
By use, roughly divided into 4 types, to adapt to the full range of models.
Lloyd standard certified products (MYA-LA12, -LB12).
Name: Cycle Control Unit.
Isolation transformer: Yes.
Rated power supply voltage: 100 to 240 VAC.
Refer to Safety Precautions for All Power Controllers.
Used in Combination with the G3PA to.
Enable High-precision Temperature Contro.
Use cycle control to achieve power control with little noise.
Used in combination with the G3PA to connect to single- and,
three-phase loads OMRON MYA-LB12.
Three types of input method available: Internal adjuster,
external adjuster, or DC signals from 4 to 20 mA MYA-LB12
Streamline design. Both DIN track mounting and screw,
mounting possible.
Use linking terminals for close mounting of the G3PA.
Built-in isolation transformer.
Power supply range: 100 to 240 V. Terminal (wire connection): Screw terminal OMRON MYA-LB12.
Applicable output load: AC load.
Zero cross function: No.
Rated input voltage: DC 12V.
Global standard size,
low profile slim I/O relay with width 6.2 mm,
slim I/O solid state relay.
Realized about 25% lower profile than conventional,
products, contributing to further miniaturization of the,
control panel.
Push-In Plus terminal blocks are used to save wiring work,
in comparison with conventional screw terminals OMRON MYA-LB12.
(Wiring time is reduced by 60%* in comparison with,
traditional screw terminals.).
No screw loosening means maintenance-free application,
realizing high reliability.
Hand-free structure that holds an inserted flat-blade,
screwdriver to achieve easier wiring work for stranded wires OMRON Contact alarm relay circuit unit.
Screw terminal is also stocked to meet the screw type needs OMRON Contact alarm relay circuit unit.
Mounted relay or solid-state relay has a plug-in terminal.
that is difficult to bend at the time of exchange. Mounting type: W-bracket(see note).
Contact form: 3PST-NO/SPST-NC.
Screw terminals.
A High-capacity, High-dielectric-strength,
Multi-pole Relay Used Like a Contactor.
Miniature hinge for maximum switching power for motor loads,
as well as resistive and inductive loads OMRON Contact alarm relay circuit unit MYA-LB12.
No contact chattering for momentary voltage drops up to 50%,
of rated voltage.
Withstanding more than 4 kV between contacts that are differ,
ent in polarity and betweenn the coil and contacts OMRON MYA-LB12.
Flame-resistant materials (UL94V-0-qualifying) used for all in,
sulation material.
Standard models approved by UL and CSA.
Isolation transformer: Yes.
Rated power supply voltage: 100 to 240 VAC.
Refer to Safety Precautions for All Power Controllers.
Used in Combination with the G3PA to.
Enable High-precision Temperature Contro.
Use cycle control to achieve power control with little noise.
Used in combination with the G3PA to connect to single- and,
three-phase loads OMRON MYA-LB12.
Three types of input method available: Internal adjuster,
external adjuster, or DC signals from 4 to 20 mA MYA-LB12
Streamline design. Both DIN track mounting and screw,
mounting possible.
Use linking terminals for close mounting of the G3PA.
Built-in isolation transformer.
Power supply range: 100 to 240 V. Terminal (wire connection): Screw terminal OMRON MYA-LB12.
Applicable output load: AC load.
Zero cross function: No.
Rated input voltage: DC 12V.
Global standard size,
low profile slim I/O relay with width 6.2 mm,
slim I/O solid state relay.
Realized about 25% lower profile than conventional,
products, contributing to further miniaturization of the,
control panel.
Push-In Plus terminal blocks are used to save wiring work,
in comparison with conventional screw terminals OMRON MYA-LB12.
(Wiring time is reduced by 60%* in comparison with,
traditional screw terminals.).
No screw loosening means maintenance-free application,
realizing high reliability.
Hand-free structure that holds an inserted flat-blade,
screwdriver to achieve easier wiring work for stranded wires OMRON Contact alarm relay circuit unit.
Screw terminal is also stocked to meet the screw type needs OMRON Contact alarm relay circuit unit.
Mounted relay or solid-state relay has a plug-in terminal.
that is difficult to bend at the time of exchange. Mounting type: W-bracket(see note).
Contact form: 3PST-NO/SPST-NC.
Screw terminals.
A High-capacity, High-dielectric-strength,
Multi-pole Relay Used Like a Contactor.
Miniature hinge for maximum switching power for motor loads,
as well as resistive and inductive loads OMRON Contact alarm relay circuit unit MYA-LB12.
No contact chattering for momentary voltage drops up to 50%,
of rated voltage.
Withstanding more than 4 kV between contacts that are differ,
ent in polarity and betweenn the coil and contacts OMRON MYA-LB12.
Flame-resistant materials (UL94V-0-qualifying) used for all in,
sulation material.
Standard models approved by UL and CSA.
...More relevant models >>>>
Last one: OMRON Contact alarm relay circuit unit MYA-LA12
next one: OMRON Terminal Relay G6D-F4B Series/G3DZ-F4B Series
Related download