LK Automation Limited
Home >> Products >> OMRON >> Security products >> Safety door switch >> OMRON D4JL-4PFA-C7-01 in hazardous work areas OMRON D4JL-4PFA-C7-01

OMRON D4JL-4PFA-C7-01 in hazardous work areas OMRON D4JL-4PFA-C7-01

Brand: OMRON
Name: Guard Lock Safety-door Switch/Slide key
Model: D4JL-4PFA-C7-01
Release key type: Trapped key *1.
Indicator: Green.
Lock and release types: Mechanical lock Solenoid release.
Contact configuration(door open/closed detection switch,
and lock monitor switch contacts): 2NC/1NO+3NC.
Conduit opening: M20.
Holding Force of 3,000 N.
Two safety circuits and two monitor contacts provide an,
array of monitoring patterns.
Standard gold-clad contacts enable use with ordinary loads,
and microloads.
Models with trapped keys prevent workers from being locked,
in hazardous work areas.
Models with rear release buttons allow people to unlock the,
Switch and escape if they are locked into hazardous areas.
IP67 degree of protection.

Release Key Type: Special (resin).
Wiring method: Connector.
Solenoid voltage/Indicator: 24VDC (Orange).
Lock and release type: Mechanical lock Solenoid release.
Contact configuration (door open/closed detection switch,
and lock monitor switch contacts): 6-contact Model,
Insert the built-in switch (N, P, Q or R) into the blank @ OMRON D4JL-4PFA-C7-01.
Conduit size (See Note.): M20.
World''s smallest Class 6-contact Guard Lock D4JL-4PFA-C7-01
Safety-door Switch.
.
Wiring time is reduced with two types of wiring.
methods capable of one-touch attachment and removal.
A wide variety of built-in switches can be used for various devices.
(4-, 5-, and 6-contact models are available) OMRON D4JL-4PFA-C7-01.
Key holding force of 1,300 N.
It is possible to change the key insertion point.
without detaching the head.
Drive solenoids directly from the Controller.
.
Lockout Key to prevent workers from becoming.
trapped inside the hazardous area.
The vertical D4SL Guard Lock Safety-door Switch,
can be easily mounted on 40 × 40 mm aluminum frames.
The plastic material makes the Slide Key suitable,
for lightweight doors OMRON D4JL-4PFA-C7-01. Actuator: Roller plunger.
Conduit size: 1-conduit; M20.
Built-in switch mechanism: 1NC/1NO (Slow-action).
A Series of Pull-reset Models Now.
Available.
Lineup includes three contact models with 2NC/1NO and 3NC,
contact forms in addition to the previous contact forms 1NC/1NO and 2NC OMRON Guard Lock Safety-door Switch/Slide key.
M12-connector models are available, saving on labor and,
simplifying replacement OMRON Guard Lock Safety-door Switch/Slide key.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115, EN81-1 and EN81-2.
Certified standards: UL, EN (TÜV), and CCC. Number of beams: 72.
Protective height: 1470mm.
Previously light curtains only offered status indicators OMRON Guard Lock Safety-door Switch/Slide key.
The three types of indicators on the F3SR-B are not only,
status indicators but enable.
the user to compleetely understand the status at a glance,
further enhancing usability D4JL-4PFA-C7-01. Number of beams: 50.
Protective height: 1025mm.
Model: PNP output.
Basic Type with a combination of.
performance and functionality.
Up to three sets off series-connected sensors OMRON D4JL-4PFA-C7-01.
The muting function is enabled simply with Muting Key Cap.
Comes standard with interlock and auxiliary output functions.


...More relevant models >>>>