Size: M30, Shielded.
Sensing distance: 15.0 mm.
Connection: Pre-wired.
Body material: Brass.
Thread length (overall length): 66 (86).
Output configuration: PNP.
Operation mode NO.
Safe Mounting with Greater.
Sensing Distance.
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
M30; both long and short barrels).
Modular construction simplifies customization.
Appearance: Shielded, M18.
Sensing distance: 4 mm.
Output configuration: DC 2-wire.
Model: Operation mode, NO.
Chip-immune Inductive.
Proximity Sensor.
Correct operation even with aluminum or iron chips sticking,
to the Sensor.
Only the sensing object is detected.
Pre-wired Smartclick Connector Models also available OMRON E2A-M30LS15-WP-B1 2M. Field of view: Wide View (Short-distance).
Number of pixels: 350,000 pixels
E2A-M30LS15-WP-B1 2M
Monochrome: NPN.
Field of view/Installation distance: Refer to figure 4 on p.20.
Inspection capabilities, camera options,
and communication options -- this powerful,
heavy weight has it all.
This Vision Sensor provides all of the best-selling,
features found in high-end models without the,
need as in vision system for a separate controller OMRON E2A-M30LS15-WP-B1 2M.
This new Smart Camera was designed to attract,
potential customers to try the FQ2 Series. Detection methods: the firing pattern.
Detection range: 300mm.
Usage: slender type,
Small thin space probe;
Interference prevention function with close installationFitting materials: Stainless steel (SUS304).
Count: 1.
Accessories: Description, Holder (upper) Holder,
(lower) Pipe Bolts M4 × 12 with Hexagonal holes,
Bolts M4 × 30 with hexagonal holes,
Phillips screws M3 × 12 (with spring and plain washers),
Spring washer M4 Plain washer M4 Nuts M4;
Material, Heat-resistant ABS resin, 66 nylon,
Stainless steel (SUS304), Iron, nickel plating,
Iron, nickel plating, Stainless steel (SUS304),
Iron, nickel plating, Iron, nickel plating,
Iron, nickel plating; Count, 1, 1, 1, 2, 1, 2, 1, 1, 3 OMRON E2A-M30LS15-WP-B1 2M OMRON Cylindrical Proximity Sensor OMRON Cylindrical Proximity Sensor.
Applicable sensor (mounting pitch on sensor side): E3Z (25.4) E39-R1/E39-R3.
Page: Dimensions, 9. Optical system: diffuse type.
Detection distance: 350 positive and negative 135mm.
Beam shape: point beam.
Beam diameter: diameter of 240 M OMRON Cylindrical Proximity Sensor.
Resolution: 20 m.
Cable length: 0.5m. Detection mode: diffuse reflection type.
Connection: socket type (M12).
Detection distance: infrared 1mmmm.
Output mode: NPN output. Connection method: Pre-wiired connector E2A-M30LS15-WP-B1 2M.
Cable length: 0.5 m.
Sensing distance: 300 ± 150 mm.
Model: PNP output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece OMRON E2A-M30LS15-WP-B1 2M.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm.