OMRON TL-N7MD2 2M Easy installation, high-speed pulse generator, high-speed, OMRON TL-N7MD2 2M

Size: M12, Shielded.
Sensing distance: 4.0 mm.
Connection: Pre-wired.
Body material: Brass.
Thread length (overall length): 56 (72).
Output configuration: PNP.
Operation mode NO.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor OMRON TL-N7MD2 2M.
Problems such as the collision of workpieces are eliminated TL-N7MD2 2M
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. Optical system: positive and negative radiation.
Detection distance: 40 positive and negative 2.5mm.
Beam shape: linear beam.
Beam diameter: 2000mm * 35 M.
Resolution: 0 OMRON TL-N7MD2 2M. 4 M.
Cable length: 4m. Ultra high performance sensors support the core quality of large scale ultra precision measurement.
Measurement center distance of 20 ~ 1500 mm of various models.
Maximum resolution of 0.25 mu m.
Maximum response speed of 110 Mu s.
Support parallel output.
Best size / stability.
Sensor size.
Pay attention to the performance of the best sensor head size and 3 point type fixed structure to ensure superior sensing stability OMRON TL-N7MD2 2M.
Excellent mobile resolution.
Perspective resolution enhancement.
By improving the sensitivity and resolution of the optical lens,
Optimization of optical system,
Thereby greatly reducing the motion resolution error (due to the location of the workpiece surface caused by the error) OMRON Rectangular Standard Proximity Sensor. Power supply voltage: 12 to 24 VDC.
Output configuration: Open-collector output OMRON Rectangular Standard Proximity Sensor.
Detects the Rotary Encoder Direction.
Input phase difference signal from the Encoder to detect the,
direction of rotation.
High-speed response at 120 kHz.
Mounts to DIN Track. Thin design enables superb mounting efficiency.
Front-panel switch enables reversing phase Z logic OMRON Rectangular Standard Proximity Sensor.
Enables connecting either voltage outputs or open-collector outputs. High performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC two-wire / connector type.
Polarity: there.
Shape: shield, M12.
Detection range: 3mm.
Action mode: NC. Size: M30, Non-shielded.
Sensing distance: 20.0 mm.
Connection: M12 connector.
Body material: Brass.
Thread length (overall length): 44 (58)(See note.).
Output configuratioon: PNP TL-N7MD2 2M.
Operation mode NC.
Safe Mounting with Greater.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpiecees are eliminated OMRON TL-N7MD2 2M.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization.