Home
>> Products
>> OMRON
>> Power/other peripheral devices
>> Sensor I/O connector / sensor controller
>> Sensor I/O connector
>> OMRON XN2A-1670 Wiring simple and e-CON * specifications for connectors Simple wiring connector for industrial equipment XN2A-1670
OMRON XN2A-1670 Wiring simple and e-CON * specifications for connectors Simple wiring connector for industrial equipment XN2A-1670
Brand:
OMRON
Name: Simple wiring connector for industrial equipment
Model: XN2A-1670
Type: cable plug connector.
Contact number: 6.
Wiring simple and e-CON * specifications for connectors;
Ideal choice for connecting sensors.
The connection of the spring clip which is verified by the industry is adopted.
Wiring is simple, no special tools required,
Can be re wiring (maintenance).
Acceptable range for each connector
Stranded AWG28 (0.08mm2) ~ AWG20 (0.5mm2),
Any core wire size between.
(outer diameter: no more than 1.5mm).
A clamp capable of simultaneously connecting 4 lines when a connection is also provided.
UL standard (Document No. E103202) identified as a standard product.
Cable connector with the UL standard certification of products.
"
...More relevant models >>>>
Name: Simple wiring connector for industrial equipment
Model: XN2A-1670
Type: cable plug connector.
Contact number: 6.
Wiring simple and e-CON * specifications for connectors;
Ideal choice for connecting sensors.
The connection of the spring clip which is verified by the industry is adopted.
Wiring is simple, no special tools required,
Can be re wiring (maintenance).
Acceptable range for each connector
Stranded AWG28 (0.08mm2) ~ AWG20 (0.5mm2),
Any core wire size between.
(outer diameter: no more than 1.5mm).
A clamp capable of simultaneously connecting 4 lines when a connection is also provided.
UL standard (Document No. E103202) identified as a standard product.
Cable connector with the UL standard certification of products.
"
Ideal for Monitoring 3-phase Power Supplies,
for Industrial Facilities and Equipment.
Greater resistance to inverter noise.
Monitor undervoltages, overvoltages, phase sequence, and phase loss,
in three-phase three-wire circuits with one unit.
One SPDT output relay, 5 A at 250 VAC (resistive load) OMRON XN2A-1670.
World-wide power specifications supported by one unit.
(Set with a rotary switch XN2A-1670).
Relay status can be monitored using LED indicator. Shape: combination form.
Pole number: 30.
Pole pole number: 1.
Minimum packing unit: 70.
Printed board connector core, MIL specification standard.
Through the use of new productivity design, high reliability and low price synchronization.
A box type plug (XG4C) which is convenient for saving space is provided in the province OMRON XN2A-1670.
A press type plug (XG4E) capable of using the relay is provided.
Will be the company''s loose wire connector (XG5) - specific plug (XG8) and PCB type.
(XG2) combined use of various types of packaging can be achieved.
Suitable for the company''s own development of a simple locking lever can make the unique plug (XG8) and,
Box type plugs (XG4C) can also be locked OMRON XN2A-1670.
MIL specification (MIL-C-83503) standard.
Standard product conforms to the UL specification (No. E103202 File) certified products. Simplifies Connector and terminal,
block replacement, and requires less,
in-panel wiring.
Mount to DIN Track or via screws.
MIL Flat Cable Connectors and Multi-pole, Square,
Connectors are standard OMRON Simple wiring connector for industrial equipment.
Terminal blocks available with either M3 or M3.5 screws OMRON Simple wiring connector for industrial equipment.
Connecting Cables for Programmable Controllers,
available (sold separately). Type: collection type.
Shell: square body embedded type.
30 years of best-selling products new upgrade in the reservation,
Based on the basic functions to achieve a compact.
The installation dimensions of the surface type remain unchanged, the volume ratio of the volume ratio of the square body is reduced,
Half OMRON Simple wiring connector for industrial equipment. (excluding AGD-U2)
Built in digital filter to reduce the impact of high frequency interference, to achieve a higher acccuracy,
Leakage monitoring XN2A-1670.
The output point consists of 1c1a * monitoring circuit, an external signal based on contact,
Remote monitoring and alarm output of each monitoring circuit.
Cube embedded type also built-in buzzer. (exceptt AGD-U2) alarm output,
Optional external buzzer OMRON XN2A-1670.
After the upgrade of all products can choose automatic reset, manual reset.
(AGD-N5, AGD-NY5, AGD-N52)
for Industrial Facilities and Equipment.
Greater resistance to inverter noise.
Monitor undervoltages, overvoltages, phase sequence, and phase loss,
in three-phase three-wire circuits with one unit.
One SPDT output relay, 5 A at 250 VAC (resistive load) OMRON XN2A-1670.
World-wide power specifications supported by one unit.
(Set with a rotary switch XN2A-1670).
Relay status can be monitored using LED indicator. Shape: combination form.
Pole number: 30.
Pole pole number: 1.
Minimum packing unit: 70.
Printed board connector core, MIL specification standard.
Through the use of new productivity design, high reliability and low price synchronization.
A box type plug (XG4C) which is convenient for saving space is provided in the province OMRON XN2A-1670.
A press type plug (XG4E) capable of using the relay is provided.
Will be the company''s loose wire connector (XG5) - specific plug (XG8) and PCB type.
(XG2) combined use of various types of packaging can be achieved.
Suitable for the company''s own development of a simple locking lever can make the unique plug (XG8) and,
Box type plugs (XG4C) can also be locked OMRON XN2A-1670.
MIL specification (MIL-C-83503) standard.
Standard product conforms to the UL specification (No. E103202 File) certified products. Simplifies Connector and terminal,
block replacement, and requires less,
in-panel wiring.
Mount to DIN Track or via screws.
MIL Flat Cable Connectors and Multi-pole, Square,
Connectors are standard OMRON Simple wiring connector for industrial equipment.
Terminal blocks available with either M3 or M3.5 screws OMRON Simple wiring connector for industrial equipment.
Connecting Cables for Programmable Controllers,
available (sold separately). Type: collection type.
Shell: square body embedded type.
30 years of best-selling products new upgrade in the reservation,
Based on the basic functions to achieve a compact.
The installation dimensions of the surface type remain unchanged, the volume ratio of the volume ratio of the square body is reduced,
Half OMRON Simple wiring connector for industrial equipment. (excluding AGD-U2)
Built in digital filter to reduce the impact of high frequency interference, to achieve a higher acccuracy,
Leakage monitoring XN2A-1670.
The output point consists of 1c1a * monitoring circuit, an external signal based on contact,
Remote monitoring and alarm output of each monitoring circuit.
Cube embedded type also built-in buzzer. (exceptt AGD-U2) alarm output,
Optional external buzzer OMRON XN2A-1670.
After the upgrade of all products can choose automatic reset, manual reset.
(AGD-N5, AGD-NY5, AGD-N52)
...More relevant models >>>>
Last one: OMRON Simple wiring connector for industrial equipment XN2A-1570
next one: OMRON Simple wiring connector for industrial equipment XN2A-1870
Related download