PFXZCCWG7W1 Proface PFXZCCWG7W1 7 inch (inch) waterproof rubber washer

5.7 inches, for the protection of the man-machine interface from oil and chemical pollution (5 / set).128MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.Length: 5 meters.For connecting GP operation data with RS-422 and power /DIO terminals Proface PFXZCCWG7W1. Length: 5 meters.For the DVI input to GP3000For multi connection communication, length: 5 meters PFXZCCWG7W1Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.Portable GP2000H series models accessories, RS-422 single head cable (3 m).COM1 interface with the cable (RS-232C), used to connect directly to the SYSMAC connection module (or other host)For 5 Proface PFXZCCWG7W1. 7 inch models, for fixing the hooks of the three EX modules.Colorful LED switch with USB interface.A veneer, for the GP4000 series back loading models of full flush (white, 1)For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.LT4000M (module type DIO), PNP output, DC24V (host).The MITSUBISHI Q series PLC is connected to GP, length: 5 m Proface PFXZCCWG7W1. When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)3.8 inches, GP installed to the hard panel to provide dust and moisture proof function.Used to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors Proface 7 inch (inch) waterproof rubber washer.
Length: 10 meters. When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function Proface 7 inch (inch) waterproof rubber washer. (1)CFast cards (32GB, SLC,) inserted in the CFast slot for storage.3.5 inch screen protective cover (1 pieces)Touch screen anti ultraviolet protective film (1 pieces).5 / sets12.1 inches /10.4 inches (STN), the GP installed to the hard panel to provide dust and moisture proof function Proface 7 inch (inch) waterrproof rubber washer PFXZCCWG7W1. The nut for mounting the display module (10 / set).10.4 inches (TFT), replace the backlight (2 / set)LT4000M (module type DIO), NPN output, DC24V (host).Used to interface the main machine output serial port (D-sub 9 pin concave type) directly connected to the RS-422 terminal block Proface PFXZCCWG7W1. A veneer, for the GP4000 series back loading models of full flush (white, 1)