PFXZCDDS102 10 inch widescreen LCD screen protective film Proface PFXZCDDS102

One end is a loose wire, which is used to carry out RS-232C connection between the host and LT.7.4 inches, replace the backlight (1 / set)Digital small keyboard with USB interface.A veneer, for the GP4000 series back loading models of full flush (white, 1)Touch screen anti ultraviolet protective film (1 pieces) Proface PFXZCDDS102. Used to install the GP3000H series to a commercially available support arm or panel PFXZCDDS102COM1 interface with the cable for direct connection to the CPU series PLC QExtension cable for connecting USB (Type-A) interface to front panel.For 5.7 inch models, for the 5.7 inch man-machine interface into the LT series (A/B/B+/C/H Type) of the opening.Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter Proface PFXZCDDS102.
Length of 5 meters. Some types of PLC are not connected. Length: 5 meters.COM1 interface with the cable (RS-232C), used to connect directly to the SYSMAC connection module (or other host)Portable GP2000H series models accessories, RS-232 single head cable (10 m).The man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port Proface PFXZCDDS102. Fitting on NETWORK FLEX interface. Connecting NETWORK FLEX communication cable. (5 / set)For connecting GP operation data with D-Sub RS-232C and power /DIO terminals.Direct interface Matsushita Electric PLC FP series CPU port.Used to connect to an external device (Type-A RS-422/RS-485 interface) to an external device (USB interface) Proface 10 inch widescreen LCD screen protective film.. 7.0/7.5 inch screen protective cover (1 pieces)Stop pin, prevent cable connection loose USB cable fastening clip (Type-A*1 USB, Mini-B, each 1 interface), used to adjust the thickness of the mounting panel 2mm gasket (1 pieces) Proface 10 inch widescreen LCD screen protective film.. Extension cable for connecting USB (Mini-B) interface to front panel.COM2 adapter for converting the COM2 interface to the RS-422 terminal blockUsed for converting the D-Sub 9 pin convex joint to the D-Sub 25 pin concave joint5 Proface 10 inch widesscreen LCD screen protective film PFXZCDDS102. . 7 inches, for the protection of the man-machine interface from oil and chemical pollution (5 / set).1-0 DVI standard (DVI-D 24 pin convex connector)Touch panel operation for RGB input modules ((Master - from: Mini-B)Used to interface the main machine output serial port (D-sub 9 pin concave type) directly connected to the RS-422 terminal block Proface PFXZCDDS102.