PFXZCFAF31 Proface PFXZCFAF31 43 inch models to install a fixed screw

With a fixed screw of the pre USB protection cover, in compliance with IP66F, IP67F, 1/4X Type only indoor use /13 or ATEX certification (5 / set).Touch screen anti ultraviolet protective film (1 pieces).Some types of PLC are not connected. Length: 5 meters.Apply to GLC-2600/2500Touch screen anti ultraviolet protective film (1 pieces) Proface PFXZCFAF31. Apply to GLC-2600/25007.0/7.5 inch screen protective cover (1 pieces)For 5 PFXZCFAF317 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.Connect to USB printer (Type-B).GP4000 series back mounted model of waterproof rubber gasket Proface PFXZCFAF31. (1)For connecting the GP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block.Touch screen anti ultraviolet protective film (1 pieces).Connector for connecting DC power cord. (right angle, 5 / set)Standard cable for connecting GP3000H adapter and GP3000H.
Length: 3 meters Proface PFXZCFAF31. Expansion module for the GP3000 access to the DeviceNet network and communication with the DeviceNet master stationWhen the man-machine interface is installed to the hard panel to provide dust and moisture proof function (1)5.7 inches, for the protection of the man-machine interface from oil and chemical pollution (5 / set) Proface 4.3 inch models to install a fixed screw. Connector for connecting DC power cord (5 / set).With the installation of screws (4 / sets), for the GP4000 series back mounted to the fixed panel models Proface 4.3 inch models to install a fixed screw. (2 / set)To prevent the connection of disconnected USB cable fastening clips (Type-A USB, 1 interface, 5 / set)For 5.7 inch models, for the 5.7 inch man-machine interface into the LT series (A/B/B+/C/H Type) of the opening Proface 4.3 inch models to install a fixed screw. 5.7 inches thin fillm used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set) PFXZCFAF31. 7.4 inches, replace the backlight (1 / set)Used to prevent disconnection. (1 interface, 5 / set)For the opperation screen (5 pieces) (GP3000H standard) Proface PFXZCFAF31. 10.4 inches (TFT), the GP will be installed to the hard panel to provide dust and moisture proof function.