PFXZLMCBRJR81 Proface PFXZLMCBRJR81

Connector for connecting DC power cord (5)COM2 terminal adapter for communication through the RS-422/485 connection15 inches, replaced by a host of backlight (1).Suitable for A/B+ Type models13 pin input connectors for HTB and 16 pin output connectors. (1 / set)Touch screen anti ultraviolet protective film (1 pieces) Proface PFXZLMCBRJR81. Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface PFXZLMCBRJR8115 pin I/O joint (joint Ax1, joint Bx1) and 6 pin I/O connector (joint Cx 1, connector Dx1). Note: joints A and B are different, the joints C and D different.Memory for extending EX GP-Pro alarm and character table functions.When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function Proface PFXZLMCBRJR81. (1)10.4 inches (TFT), the replacement of the host backlight (1).Adapter for EX module (5 / set)4.3 Inch Touch Screen anti UV protective film (1 pieces).5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)10.4 inch screen protective cover (1 pieces)Touch screen anti ultraviolet protective film (1 pieces) Proface PFXZLMCBRJR81. GP-230/250/270 series is replaced by ST series, the gap filled with the opening of the panelLT4000M (module type analog), NPN output, DC24V (host).The MITSUBISHI A series PLC is connected to GP, length: 5 m Proface RS-485 RJ45 cable (5 m). For the operation screen (5 pieces) (GP3000H standard).Cable for transmitting an image signal from an Pro-face host to a Pro-face industrial display or other commercial display device (24- DVI-D pin convex) Proface RS-485 RJ45 cable (5 m). Expansion module for the GP3000 access to the PROFIBUS network and DP PROFIBUS master communicationThe main body module and the separate display module are used for connecting the main machine module and the separate display module in the DIN guide rail Proface RS-485 RJ45 cable (5 m). 12.1 inches, repllace the backlight (1 / set)Used to interface the main machine output serial port (D-sub 9 pin concave type) directly connected to the RS-422 terminal block PFXZLMCBRJR81. The main controller is connected to the man-machine interface for MPI communicationA1/A2/B+ DIO Type connector (welding type) (5 / set)5 / sets7 Proface PFXZLMCBRJR81. 5 inches /3.8 inches /5.7 inches, used to connect the power cord (5 / sets).