Home
>> Products
>> Proface
>> Touch Screen
>> GP3000 series
>> Proface AGP3300-T1-D24-D81C(PFXGP3300TADDC) Display type: TFT color LCD 57 Inch Touch Screen (PNP model) AGP3300-T1-D24-D81C(PFXGP3300TADDC)
Proface AGP3300-T1-D24-D81C(PFXGP3300TADDC) Display type: TFT color LCD 57 Inch Touch Screen (PNP model) AGP3300-T1-D24-D81C(PFXGP3300TADDC)
Brand:
Proface
Name: 5.7 Inch Touch Screen (PNP model)
Model: AGP3300-T1-D24-D81C(PFXGP3300TADDC)
Controller DIO (NPN model):6 point type NPN input, 2 point NPN type output, connector: 12 pin.
Specification: DC24/C (control) level models.
Display type: TFT color LCD.
Display size: 5.7 inches.
Resolution: 320 x 240 pixels (QVGA).
Display color: 65536 color (no flicker) /16384 color (flashing).
Brightness adjustment: cold cathode lamp (backlight lamp replacement: return to repair).
Touch panel type: resistance type (analog).
Easily upgrade.
GP/ST series supports GP series of all models of the screen data, including the first generation of the GP10 series.
GP product family to maintain the size of the opening of the panel compatibility, to facilitate easy replacement.
Simulated running status on PC.
Use PC simulation function, do not need to transfer the picture to GP,
You can check all the functions of GP on the PC - including the screen operation, D script, logical script.
Providing operation and maintenance instructions through video mode, which can save maintenance cost.
The operation and maintenance instructions provided by the video mode can make any operator easy to master the operation method.
No need to open the control panel, through the PLC to monitor the GP program.
Through the data through the GP function, you can easily debug the ladder program and adjust the data due to changes in the production line by GP easily.
Use USB memory or CF card backup monthly and daily
Recording function using USB memory or CF card can easily improve the efficiency of daily and monthly.
The use of CSV data conversion function can be modified on the PLC GP settings.
Rich sample images can reduce programming time.
Pro-face provides a large number of sample images and 3D parts,
So you can easily create a beautiful and intuitive picture, in order to save editing time.
Data transmission using USB memory.
In the production site using USB memory can be easily transferred to the production line change and change the screen data.
Can improve the efficiency of the 5 functions.
Using EX GP-Pro can easily create a clear picture and save the creation time.
Screen and logic programming software EX GP-Pro interface is very friendly,
The drag and drop feature makes the software interface easy to operate.
EX GP-Pro powerful features, such as 3D simulation components, image fonts and simulation functions,
Even beginners can easily and quickly grasp how to create a picture.
Error visualization.
The controller is directly connected to the GP, and the key error information of the controller can be displayed on the GP by using the sample unit.
Remote operation and monitoring in the Office
In the office or other remote side can monitor the production site of the GP screen.
Without picture editing or programming, you can achieve real-time management and monitoring, and now, you can also provide more efficient remote maintenance control.
...More relevant models >>>>
Name: 5.7 Inch Touch Screen (PNP model)
Model: AGP3300-T1-D24-D81C(PFXGP3300TADDC)
Controller DIO (NPN model):6 point type NPN input, 2 point NPN type output, connector: 12 pin.
Specification: DC24/C (control) level models.
Display type: TFT color LCD.
Display size: 5.7 inches.
Resolution: 320 x 240 pixels (QVGA).
Display color: 65536 color (no flicker) /16384 color (flashing).
Brightness adjustment: cold cathode lamp (backlight lamp replacement: return to repair).
Touch panel type: resistance type (analog).
Easily upgrade.
GP/ST series supports GP series of all models of the screen data, including the first generation of the GP10 series.
GP product family to maintain the size of the opening of the panel compatibility, to facilitate easy replacement.
Simulated running status on PC.
Use PC simulation function, do not need to transfer the picture to GP,
You can check all the functions of GP on the PC - including the screen operation, D script, logical script.
Providing operation and maintenance instructions through video mode, which can save maintenance cost.
The operation and maintenance instructions provided by the video mode can make any operator easy to master the operation method.
No need to open the control panel, through the PLC to monitor the GP program.
Through the data through the GP function, you can easily debug the ladder program and adjust the data due to changes in the production line by GP easily.
Use USB memory or CF card backup monthly and daily
Recording function using USB memory or CF card can easily improve the efficiency of daily and monthly.
The use of CSV data conversion function can be modified on the PLC GP settings.
Rich sample images can reduce programming time.
Pro-face provides a large number of sample images and 3D parts,
So you can easily create a beautiful and intuitive picture, in order to save editing time.
Data transmission using USB memory.
In the production site using USB memory can be easily transferred to the production line change and change the screen data.
Can improve the efficiency of the 5 functions.
Using EX GP-Pro can easily create a clear picture and save the creation time.
Screen and logic programming software EX GP-Pro interface is very friendly,
The drag and drop feature makes the software interface easy to operate.
EX GP-Pro powerful features, such as 3D simulation components, image fonts and simulation functions,
Even beginners can easily and quickly grasp how to create a picture.
Error visualization.
The controller is directly connected to the GP, and the key error information of the controller can be displayed on the GP by using the sample unit.
Remote operation and monitoring in the Office
In the office or other remote side can monitor the production site of the GP screen.
Without picture editing or programming, you can achieve real-time management and monitoring, and now, you can also provide more efficient remote maintenance control.
Input points: 2 points.
External connection: 11 pin terminal connector
Input type:
Thermocouple Input
Type K: 0 to 1300
Type J: 0 to 1200
Type T: 0 to 400
Thermal resistance input
Pt100:-100 to 500
Resolution: 12.
Output points: 1 points.
Rated output voltage range: voltage output: 0 to 10V, current input: 4 to 20mA Proface AGP3300-T1-D24-D81C(PFXGP3300TADDC).
Resolution: 12. GP4000E series entry-level programmable man-machine interface AGP3300-T1-D24-D81C(PFXGP3300TADDC)
Screen size: 10 inch widescreen.
Display type: TFT color LCD.
Resolution: 800 x 480 pixels (WVGA).
Display color number: 65536 color.
Backlight: LED.
Internal memory: EPROM FLASH 32 MB.
Backup memory: EPROM FLASH 128 KB.
Interface: RS-232C, RS-422/485, Ethernet, USB.
Voltage: DC24V.
Easy to direct.
GP4000E full range of standard Ethernet, can be connected to a variety of industrial controller,
Such as PLC, motion controller, robot, vision sensor, etc Proface AGP3300-T1-D24-D81C(PFXGP3300TADDC). .
Expanding business.
All hardware can be used to create the required EX GP-Pro screen.
All hardware equipment using the same development platform, is conducive to the development of new business.
Reduce the burden of CPU PLC.
GP4000E series can use internal logic programming function (ladder diagram programming) to reduce the burden of CPU PLC Proface AGP3300-T1-D24-D81C(PFXGP3300TADDC).
More humanized design.
USB1 (A Type) on the lock and prevent the U disk to drop the lock screw.
Sliding type battery cabin, so that more convenient to replace the battery Proface 5.7 Inch Touch Screen (PNP model).
3 communication interface (1 network port, serial port 2), not only can be directly connected with the PLC,
And can be directly connected with other controllers (SCM, thermostat),
Helps to reduce the cost of the modules to be added after connecting these controllers with PLC Proface 5.7 Inch Touch Screen (PNP model).
Take time for the bad production environment
Low power consumption, no heat sink holes, effectively reduce dust and water vapor intrusion Proface 5.7 Inch Touch Screen (PNP model).
PCBA reinforced coating process (fully automatic mechanical coating),
Farewell to the use of dust, humidity and other harsh environment concerns.Display size: 4.3 inches.
Display color: TFT color LCD.
Resolution: 480 x 272 pixels (WVGA).
Display color number: 65536 color.
Backlight: LED.
Touch screen type: analog.
Storage space: 8MB.
Interface: RS-232C.
Rated voltage: DC12-DC24V.
Compact body, powerful and easy to use.
Easy customization.
Picture editing software support multi language.
Easy data processing.
Using USB (A Type) interface or Ethernet interface, easy to place the data.
Meet the development needs of the Internet era of industrial development needs of the data processing functions.
In the era of Internet of things, the demand for information on the spot is also increasing.
Configuring the GP4100 series of Ethernet and USB interfaces, even if it''s small and compact, allows you to easily access all kinds of information (such as alarms, recipes, aand samples) AGP3300-T1-D24-D81C(PFXGP3300TADDC).
Improved visualization and operability of small size human computer interface.
Resolution of 480 x 272 pixels, in a limited range of visibility can also clearly show the information.
The 655336 color display effect greatly improves the visualization and avoids the error operation caused by the low quality display of the monochromatic model Proface AGP3300-T1-D24-D81C(PFXGP3300TADDC).
External connection: 11 pin terminal connector
Input type:
Thermocouple Input
Type K: 0 to 1300
Type J: 0 to 1200
Type T: 0 to 400
Thermal resistance input
Pt100:-100 to 500
Resolution: 12.
Output points: 1 points.
Rated output voltage range: voltage output: 0 to 10V, current input: 4 to 20mA Proface AGP3300-T1-D24-D81C(PFXGP3300TADDC).
Resolution: 12. GP4000E series entry-level programmable man-machine interface AGP3300-T1-D24-D81C(PFXGP3300TADDC)
Screen size: 10 inch widescreen.
Display type: TFT color LCD.
Resolution: 800 x 480 pixels (WVGA).
Display color number: 65536 color.
Backlight: LED.
Internal memory: EPROM FLASH 32 MB.
Backup memory: EPROM FLASH 128 KB.
Interface: RS-232C, RS-422/485, Ethernet, USB.
Voltage: DC24V.
Easy to direct.
GP4000E full range of standard Ethernet, can be connected to a variety of industrial controller,
Such as PLC, motion controller, robot, vision sensor, etc Proface AGP3300-T1-D24-D81C(PFXGP3300TADDC). .
Expanding business.
All hardware can be used to create the required EX GP-Pro screen.
All hardware equipment using the same development platform, is conducive to the development of new business.
Reduce the burden of CPU PLC.
GP4000E series can use internal logic programming function (ladder diagram programming) to reduce the burden of CPU PLC Proface AGP3300-T1-D24-D81C(PFXGP3300TADDC).
More humanized design.
USB1 (A Type) on the lock and prevent the U disk to drop the lock screw.
Sliding type battery cabin, so that more convenient to replace the battery Proface 5.7 Inch Touch Screen (PNP model).
3 communication interface (1 network port, serial port 2), not only can be directly connected with the PLC,
And can be directly connected with other controllers (SCM, thermostat),
Helps to reduce the cost of the modules to be added after connecting these controllers with PLC Proface 5.7 Inch Touch Screen (PNP model).
Take time for the bad production environment
Low power consumption, no heat sink holes, effectively reduce dust and water vapor intrusion Proface 5.7 Inch Touch Screen (PNP model).
PCBA reinforced coating process (fully automatic mechanical coating),
Farewell to the use of dust, humidity and other harsh environment concerns.Display size: 4.3 inches.
Display color: TFT color LCD.
Resolution: 480 x 272 pixels (WVGA).
Display color number: 65536 color.
Backlight: LED.
Touch screen type: analog.
Storage space: 8MB.
Interface: RS-232C.
Rated voltage: DC12-DC24V.
Compact body, powerful and easy to use.
Easy customization.
Picture editing software support multi language.
Easy data processing.
Using USB (A Type) interface or Ethernet interface, easy to place the data.
Meet the development needs of the Internet era of industrial development needs of the data processing functions.
In the era of Internet of things, the demand for information on the spot is also increasing.
Configuring the GP4100 series of Ethernet and USB interfaces, even if it''s small and compact, allows you to easily access all kinds of information (such as alarms, recipes, aand samples) AGP3300-T1-D24-D81C(PFXGP3300TADDC).
Improved visualization and operability of small size human computer interface.
Resolution of 480 x 272 pixels, in a limited range of visibility can also clearly show the information.
The 655336 color display effect greatly improves the visualization and avoids the error operation caused by the low quality display of the monochromatic model Proface AGP3300-T1-D24-D81C(PFXGP3300TADDC).
...More relevant models >>>>
Last one: Proface 5.7 Inch Touch Screen (NETWORK FLEX model) AGP3300-L1-D24-FN1M(PFXGP3300LADFN)
next one: Proface 5.7 Inch Touch Screen (PNP model) AGP3300-S1-D24-D81C(PFXGP3300SADDC)
Related download
Related model