Home
>> Products
>> MITSUBISHI
>> Q series PLC
>> Analog input module
>> Q68AD-G Output (resolution): 0~32000 -32000~32000 0~64000 -64000~64000 MITSUBISHI Q68AD-G
Q68AD-G Output (resolution): 0~32000 -32000~32000 0~64000 -64000~64000 MITSUBISHI Q68AD-G
Brand:
MITSUBISHI
Name: Voltage / current input analog module
Model: Q68AD-G
8 channel.
Input: DC-10~10mA; 0~20mA.
Output (resolution): 0~4000; -4000~4000; 0~12000; -12000~12000; 0~16000; -16000~16000.
Conversion speed: 10ms/ channel.
40 pin connector.
Isolation between channels.
The possibility of expanding control with intelligent function.
At the same time, the channel isolation analog module realizes high isolation voltage,
Further improve the accuracy of the benchmark.
Provide support for process control using a general purpose programmable controller.
Flow meter, pressure meter, other sensors can be directly connected to analog input,
Control valve can also be directly connected to analog output.
Hardware and installation costs have been greatly reduced due to the need for an external isolation amplifier.
High insulation strength.
Can isolate electrical interference, such as current and noise, etc..
Standard analog input module.
Isolated analog input module.
No external isolation amplifier required.
Without the use of inter channel isolation analog modules.
Using the inter channel isolation analog module.
...More relevant models >>>>
Name: Voltage / current input analog module
Model: Q68AD-G
8 channel.
Input: DC-10~10mA; 0~20mA.
Output (resolution): 0~4000; -4000~4000; 0~12000; -12000~12000; 0~16000; -16000~16000.
Conversion speed: 10ms/ channel.
40 pin connector.
Isolation between channels.
The possibility of expanding control with intelligent function.
At the same time, the channel isolation analog module realizes high isolation voltage,
Further improve the accuracy of the benchmark.
Provide support for process control using a general purpose programmable controller.
Flow meter, pressure meter, other sensors can be directly connected to analog input,
Control valve can also be directly connected to analog output.
Hardware and installation costs have been greatly reduced due to the need for an external isolation amplifier.
High insulation strength.
Can isolate electrical interference, such as current and noise, etc..
Standard analog input module.
Isolated analog input module.
No external isolation amplifier required.
Without the use of inter channel isolation analog modules.
Using the inter channel isolation analog module.
Input voltage range: AC100-120V.
Output voltage: DC5V.
Output power: 6A.
Simplified program debugging.
Can use the software with the implementation of the conditions of the test function, any step in the program,
Changes the value of the soft component to a user specified value.
In the past, when debugging the specific loop process, the need to add a set of soft components of the program,
At present, through the use of the function, no need to change the program, you can make a specific loop program segment execution action MITSUBISHI Q68AD-G Q68AD-G
Therefore, do not need to change the program separately in order to debug, debugging operation is more simple.
Through the expansion of soft components, more convenient to create the program MITSUBISHI Q68AD-G.
M soft components and B soft components can be expanded to 60K points, making the program easier to understand.
Auto backup key data.
Save the program and parameter files automatically to the program memory (ROM Flash) without using the backup battery,
To prevent the loss of the program and the parameters due to forgetting to replace the battery.
In addition, the soft component data and other important data can be backed up to the standard ROM,
In order to avoid during the long holiday and other planned downtime,
The data is lost due to battery depletion MITSUBISHI Q68AD-G.
The next time the power is turned on, the backup data will be automatically restored.Control axis: maximum 32 axes.
Manual pulse generator operation function: can use 3 sets of manual pulse generator MITSUBISHI Voltage / current input analog module.
Synchronous encoder operation function: can use 12 synchronous encoder MITSUBISHI Voltage / current input analog module.
Peripheral I/F: by CPU PLC.
High speed motion control system based on multi CPU architecture.
Multi CPU system based on Q series PLC.
Flexible selection of CPU PLC and motion CPU according to different applications.
In the construction of multi CPU system, can have up to 4 sets of CPU MITSUBISHI Voltage / current input analog module.
When 3 Q173DCPU is used, the maximum 96 axes can be controlled.Extended SRAM card 1MB.
Support SD memory card.
High speed universal QCPU support SD memory card,
In order to be able to have a memory card portt between SD and PC to easily realize data exchange Q68AD-G.
In addition, the SD memory card and the extended SRAM card can be used simultaneously.
Therefore, the extension of the file register using the extended SRAM card,
SD memory cardd can be used at the same time to carry out the data file record, a large number of annotation data storage, through the memory card to guide operation MITSUBISHI Q68AD-G.
Output voltage: DC5V.
Output power: 6A.
Simplified program debugging.
Can use the software with the implementation of the conditions of the test function, any step in the program,
Changes the value of the soft component to a user specified value.
In the past, when debugging the specific loop process, the need to add a set of soft components of the program,
At present, through the use of the function, no need to change the program, you can make a specific loop program segment execution action MITSUBISHI Q68AD-G Q68AD-G
Therefore, do not need to change the program separately in order to debug, debugging operation is more simple.
Through the expansion of soft components, more convenient to create the program MITSUBISHI Q68AD-G.
M soft components and B soft components can be expanded to 60K points, making the program easier to understand.
Auto backup key data.
Save the program and parameter files automatically to the program memory (ROM Flash) without using the backup battery,
To prevent the loss of the program and the parameters due to forgetting to replace the battery.
In addition, the soft component data and other important data can be backed up to the standard ROM,
In order to avoid during the long holiday and other planned downtime,
The data is lost due to battery depletion MITSUBISHI Q68AD-G.
The next time the power is turned on, the backup data will be automatically restored.Control axis: maximum 32 axes.
Manual pulse generator operation function: can use 3 sets of manual pulse generator MITSUBISHI Voltage / current input analog module.
Synchronous encoder operation function: can use 12 synchronous encoder MITSUBISHI Voltage / current input analog module.
Peripheral I/F: by CPU PLC.
High speed motion control system based on multi CPU architecture.
Multi CPU system based on Q series PLC.
Flexible selection of CPU PLC and motion CPU according to different applications.
In the construction of multi CPU system, can have up to 4 sets of CPU MITSUBISHI Voltage / current input analog module.
When 3 Q173DCPU is used, the maximum 96 axes can be controlled.Extended SRAM card 1MB.
Support SD memory card.
High speed universal QCPU support SD memory card,
In order to be able to have a memory card portt between SD and PC to easily realize data exchange Q68AD-G.
In addition, the SD memory card and the extended SRAM card can be used simultaneously.
Therefore, the extension of the file register using the extended SRAM card,
SD memory cardd can be used at the same time to carry out the data file record, a large number of annotation data storage, through the memory card to guide operation MITSUBISHI Q68AD-G.
...More relevant models >>>>
Last one: MITSUBISHI Voltage / current input analog module Q64AD-GH
next one: MITSUBISHI High speed voltage / current input analog module Q64ADH
Related download