Home
>> Products
>> OMRON
>> Power/other peripheral devices
>> Power / equipment protection equipment
>> Protective equipment for equipment
>> SDV-FM5 DC circuits using shunt (SDV-FL) OMRON SDV-FM5
SDV-FM5 DC circuits using shunt (SDV-FL) OMRON SDV-FM5
Brand:
OMRON
Name: Voltage Sensor
Model: SDV-FM5
Control power supply voltage: 125 VDC.
Input: DC, Input voltage range, 0.2 to 12 V.
Overvoltage/Undervoltage Monitoring.
Relay for AC and DC Input.
Detect overvoltages or undervoltages (switch select,
able) from 4 mV to 300 V.
Detect undercurrent, reverse current, or overcurrent in,
DC circuits using shunt (SDV-FL).
Detect three-phase AC current for under and/or overcur,
rent using current converter.
Available in 7 supply voltage configurations.
Single-function model with ON-delay, OFF-delay, or star,
tup lock settings (SDV-FH@T).
Select either AC or DC voltage input.
Polarity can be specified (SDV-FL) to enable easy re,
verse current detection.
Selectable reset value range from 2% to 30% of operat,
ing value (SDV-F).
LED operation indicator.
UL/CSA approval (SDV-F@).
...More relevant models >>>>
Name: Voltage Sensor
Model: SDV-FM5
Control power supply voltage: 125 VDC.
Input: DC, Input voltage range, 0.2 to 12 V.
Overvoltage/Undervoltage Monitoring.
Relay for AC and DC Input.
Detect overvoltages or undervoltages (switch select,
able) from 4 mV to 300 V.
Detect undercurrent, reverse current, or overcurrent in,
DC circuits using shunt (SDV-FL).
Detect three-phase AC current for under and/or overcur,
rent using current converter.
Available in 7 supply voltage configurations.
Single-function model with ON-delay, OFF-delay, or star,
tup lock settings (SDV-FH@T).
Select either AC or DC voltage input.
Polarity can be specified (SDV-FL) to enable easy re,
verse current detection.
Selectable reset value range from 2% to 30% of operat,
ing value (SDV-F).
LED operation indicator.
UL/CSA approval (SDV-F@).
Cable Specifications: Standard cable.
No. of connector poles: 5.
Cable connection direction: Straight.
No. of cable cores: 5.
Cable outer diameter: 6.0 mm dia.
Cable core cross-sectional area: 0.3 mm.
Cable length: 0.3 m.
DC: Model.
Minimum order: 10.
UL-listed: --.
Water- and Environment-resistive FA OMRON SDV-FM5.
Connectors Save Wiring and Maintenance Effort.
Compact FA connectors meet IP67 requirements and ensure a,
94V-0 fire retardant rating SDV-FM5
A wide array of connectors makes a wiring system more modular,
simplifies maintenance, and reduces downtime.
Connectors with Cables and Connector Assemblies are available.
Three types of Connector Assembly: Crimping, soldering, and screw-on.
Connectors with Cables are UL certified OMRON SDV-FM5.
Based on IEC61076-2-101 (IEC60947-5-2) and NECA 4202. Pole number: 50 * 2.
Pole pole number: 1.
Minimum packing unit: 21.
Printed board connector core, MIL specification standard.
Through the use of new productivity design, high reliability and low price synchronization.
A box type plug (XG4C) which is convenient for saving space is provided in the province OMRON SDV-FM5.
A press type plug (XG4E) capable of using the relay is provided.
Will be the company''s loose wire connector (XG5) - specific plug (XG8) and PCB type.
(XG2) combined use of various types of packaging can be achieved.
Suitable for the company''s own development of a simple locking lever can make the unique plug (XG8) and,
Box type plugs (XG4C) can also be locked OMRON Voltage Sensor.
MIL specification (MIL-C-83503) standard OMRON Voltage Sensor.
Standard product conforms to the UL specification (No. E103202 File) certified products. Servo trunk unit.
Product Name: servo relay unit.
Application unit: CS1W/CJ1W-NC__3.
Specification: with communication function support.
Axis number: biaxial.
The connector and terminal of the relay unit are integrated into a whole,
Save the wiring servo drive and position control unit OMRON Voltage Sensor.
Servo driver annd control signal of position control unit,
Simple wiring on terminal stage SDV-FM5.
The connector without soldering, with only a screwdriver can wiring.
Dedicated connection cable between units.
DIN guide rail installation, the rapid installaation, screw installation of two methods OMRON SDV-FM5.
M3.0 thread terminals attached with a special plate signal.
The terminal can be confirmed by the signal name.
No. of connector poles: 5.
Cable connection direction: Straight.
No. of cable cores: 5.
Cable outer diameter: 6.0 mm dia.
Cable core cross-sectional area: 0.3 mm.
Cable length: 0.3 m.
DC: Model.
Minimum order: 10.
UL-listed: --.
Water- and Environment-resistive FA OMRON SDV-FM5.
Connectors Save Wiring and Maintenance Effort.
Compact FA connectors meet IP67 requirements and ensure a,
94V-0 fire retardant rating SDV-FM5
A wide array of connectors makes a wiring system more modular,
simplifies maintenance, and reduces downtime.
Connectors with Cables and Connector Assemblies are available.
Three types of Connector Assembly: Crimping, soldering, and screw-on.
Connectors with Cables are UL certified OMRON SDV-FM5.
Based on IEC61076-2-101 (IEC60947-5-2) and NECA 4202. Pole number: 50 * 2.
Pole pole number: 1.
Minimum packing unit: 21.
Printed board connector core, MIL specification standard.
Through the use of new productivity design, high reliability and low price synchronization.
A box type plug (XG4C) which is convenient for saving space is provided in the province OMRON SDV-FM5.
A press type plug (XG4E) capable of using the relay is provided.
Will be the company''s loose wire connector (XG5) - specific plug (XG8) and PCB type.
(XG2) combined use of various types of packaging can be achieved.
Suitable for the company''s own development of a simple locking lever can make the unique plug (XG8) and,
Box type plugs (XG4C) can also be locked OMRON Voltage Sensor.
MIL specification (MIL-C-83503) standard OMRON Voltage Sensor.
Standard product conforms to the UL specification (No. E103202 File) certified products. Servo trunk unit.
Product Name: servo relay unit.
Application unit: CS1W/CJ1W-NC__3.
Specification: with communication function support.
Axis number: biaxial.
The connector and terminal of the relay unit are integrated into a whole,
Save the wiring servo drive and position control unit OMRON Voltage Sensor.
Servo driver annd control signal of position control unit,
Simple wiring on terminal stage SDV-FM5.
The connector without soldering, with only a screwdriver can wiring.
Dedicated connection cable between units.
DIN guide rail installation, the rapid installaation, screw installation of two methods OMRON SDV-FM5.
M3.0 thread terminals attached with a special plate signal.
The terminal can be confirmed by the signal name.
...More relevant models >>>>
Last one: 
next one: Related download