XG4A-6433 OMRON XG4A-6433

Power supply voltage: 100 to 240 VAC.
Output: Relay.
Timer function: Yes.
Features: Single-function with one input/output (two circuits).
Offers High-speed Input Response of,
0 OMRON XG4A-6433. 1 ms and Equipped with Built-in Timer,
High-speed response of 0.1 ms.
Ideal as a two-input Controller.
Lineup includes the S3D2-BK with flip-flop functions convenient for,
level control, the S3D2-AKD/CKD/CCD with 24-V power supply, and,
the S3D2-DK/EK with one input/output OFF-delay (two circuits),
useful for load control and lamp display,
Power source for the Sensor can be supplied up to 200 mA XG4A-6433
Ultra-slim body with 30-mm width OMRON XG4A-6433.
Multi-function model equipped with timer functions also available. Three-phase Phase-sequence Phase-loss.
Relay Using Voltage Detection Method.
Lineup includes a 17.5-mm slim, compact model.
Greater resistance to inverter noise.
Distinguishes between correct phases, phasee sequence, and phase,
loss when power is turned ON OMRON XG4A-6433 locking swing lever rear mounting type.
Supports phase loss detection when the motor is operating.
Output status can be monitored using LED indicator.
Ideal to prevent reverse operation of motors. Rated input voltage: 3-phase 3-wire mode, 380, 400, 415, or 480 VAC .
Ideal for Monitoring 3-phase Power Supplies OMRON MIL type plug.
for Industrial Facilities and Equipment.
Greater resistance to inverter noise.
Monitor undervoltages, overvoltages, voltage asymmetry, phase,
sequence, and phase loss in three-phase three-wire circuits with one unit.
One SPDT output relay, 5 A at 250 VAC (resistive load) OMRON MIL type plug.
World-wide power specifications supported by one unit.
(Set with a rotary switch.).
Relay status can be monitored using LED indicator. Setting range: 10 to 100 A AC, 20 to 200 A AC.
Power supply voltage: 100 to 240 VAC.
Ideal for Current Monitoring for.
Industrial Facilities and Equipment OMRON MIL type plug.
Monitor for overcurrents and undercurrents simultaneously.
Separate settings and outputs supported for overcurrents and undercurrents.
Use commercially avvailable CTs (CT current on secondary,
side: 0 to 1 A or 0 to 5 A) XG4A-6433.
Manual resetting and automatically resetting supported by one Relay.
Startup lock and operating time can be set separately.
Two sets of SSPDT output contacts, 5 A at 250 VAC (resistive load) locking swing lever rear mounting type.
Output status can be monitored using LED indicator.
Inputs are isolated from the power supply.