LK Automation Limited
Home >> Products >> OMRON >> Power/other peripheral devices >> Connection /Save wiring equipment >> Industrial Ethernet connector >> XS5W-T421-KM2-K Industrial Ethernet Cables OMRON XS5W-T421-KM2-K

XS5W-T421-KM2-K Industrial Ethernet Cables OMRON XS5W-T421-KM2-K

Brand: OMRON
Name: Industrial Ethernet Cables
Model: XS5W-T421-KM2-K
Cable type: Standard Cables.
Type: Cable with Plugs on Both Ends (M12 Straight/M12 Straight) .
Cable length: 15 m.
Cables and Connectors for,
EtherCAT® and Other Industrial,
Ethernet Networks.

Type: Static.
Number of digits: 3.
Compact (Two-, Three-, or Four-digit) S2-series,
Added to Static Mother Board.
Models.
Easily connect a M7E Digital Display without soldering.
Two-, three- and four-digit Mother Boards are available for,
connecting M7E Digital Displays and, by using two Mother,
Boards, two- to eight-digit displays are possible OMRON XS5W-T421-KM2-K.
The depth of the Mother Board with M7E Digital Display,
Units is only 58 mm, ideal for mounting to compact or thin control panels XS5W-T421-KM2-K
Connecting to OMRON''s PLCs via dedicated PLC cables,
(sold separately) (refer to M7E Options). Cable: PVC.
Cable core number (core): 4.
Cable lead direction: straight line type.
Cable length L:2m.
The province, province hours maintenance, use waterproof connector environment and strong tolerance of FA OMRON XS5W-T421-KM2-K.
Conform to IP67. FA small special connector flame retardant 94V-0.
The connector wiring system, convenient equipment maintenance, reduce equipment downtime.
IEC61076-2-101 (IEC60947-5-2).
For LED products, can clearly confirm the status of the sensor action. Type: open type.
Structure: bottom mounting type OMRON XS5W-T421-KM2-K.
Capacity: 150W.
Output voltage: 24V.
Output current: 6.5A.
Built in OMRON''s original new under voltage detection function of small size,
Also contribute to the miniaturization of the device.
Built in support for determining the abnormal causes of the new under voltage detection function OMRON Industrial Ethernet Cables.
(S8VM- - P - 24A - racy type)
Power failure detection function with built-in hint output voltage abnormity OMRON Industrial Ethernet Cables.
(type 300/600/1500W)
A total of 8 kinds of capacity of 29 models, a complete range of products.
Meet RoHS instructions including lead free.
Humanized design of anti - shedding screw for terminal stage.
(except for the 300/600/1500W output terminals)
Support finger touch protection to prevent electric shock OMRON Industrial Ethernet Cables.
DIN guide rail simple installation.
Safety standards: CSA, C22.2 No.14/No.60950-1 UL508/60950-1,
EN50178, EN60950-1.
(300/600/1500W type, safety standard is not applicable when the fan is replaced by the customer.)
Meet F47-0200 SEMI standards. (200V input)
High harmonic current limit: EN61000-3-2. (except for type 15/30W)
Time specification: Instantaneous type.
Current setting range: 20 to 65 A.
Operating voltage: 200/220/240 VAC.
Resetting method: Automatic.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase.
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operatiion time,
is indicated from the start of operation XS5W-T421-KM2-K.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequeency, basic,
frequency, and load conditions OMRON XS5W-T421-KM2-K. Error will occur in the operating,
values of the overload elements. It is recommended to test operation,


...More relevant models >>>>