LK Automation Limited
Home >> Products >> OMRON >> Power/other peripheral devices >> Connection /Save wiring equipment >> Connector terminal station conversion unit >> XW2B-40J6-4A OMRON XW2B-40J6-4A The connector and terminal of the relay unit are integrated into a whole, 

XW2B-40J6-4A OMRON XW2B-40J6-4A The connector and terminal of the relay unit are integrated into a whole, 

Brand: OMRON
Name: The servo relay unit
Model: XW2B-40J6-4A
Servo trunk unit.
Product Name: servo relay unit.
Application unit: CS1W/CJ1W-NC__3.
Specification: with communication function support.
Axis number: biaxial.
The connector and terminal of the relay unit are integrated into a whole,
Save the wiring servo drive and position control unit.
Servo driver and control signal of position control unit,
Simple wiring on terminal stage.
The connector without soldering, with only a screwdriver can wiring.
Dedicated connection cable between units.
DIN guide rail installation, the rapid installation, screw installation of two methods.
M3.0 thread terminals attached with a special plate signal.
The terminal can be confirmed by the signal name.

Power ratings: 480 W.
Input voltage: Single phase, 100 to 240 VAC, 90 to 350 VDC.
Output Voltage: 24 V.
Output current *1: 20 A.
Cost-effective Single Phase Power Supply.
Universal input and Safety standards.
for worldwide applications.
Space-saving Compact Design.
Universal input for worldwide applications:
100 to 240 VAC (85 to 264 VAC) OMRON XW2B-40J6-4A.
DC input can be available: 90 to 350 VDC XW2B-40J6-4A
Operation temperature range: –25 to 60 °C.
Compact Dimension for small space.
Flexible installation by special mounting brackets.
Safety standards:
UL508/60950-1, CSA C22.2 No.107.1/60950-1.
EN50178, EN60950-1.
EMS: Conform to EN61204-3.
EMI: EN55011 Class A.
Three years Warranty. Type: Cable with Connectors on Both Ends (RJ45/RJ45) OMRON XW2B-40J6-4A.
Category: Cat.6a .
Cable sheath material: LSZH.
Cable color: Blue.
Cable lengt: 1.5 m.
Cables and Connectors for,
EtherCAT® and Other Industrial,
Ethernet Networks. Sensor type: 2 wire DC type 1 - 4 / 3 - 4 non polarity.
Input points: 8.
The I/O sensor connector for centralized wiring,
And the province of the number of processes, strong environmental resistance as the goal,
The outer control relay box OMRON XW2B-40J6-4A.
Compact and strong centralized wiring trunk box conforming to IP67.
The corresponding sensing I/O connector mode proximity switch, limit switch,
Photoelectric switch.
With the power to show LED, action shows LED OMRON The servo relay unit.
The installation dimensions are the same and are not related to the number of input points,
Therefore, the addition of a simple exchange OMRON The servo relay unit.
A series of sensors with self diagnostic features are added to the product. Model: PY (back-mounting), page 15, Solder terminals.
Approx: 9 g.
Number of pins: 11 pins.
A Wide Variety of Square and,
Round Sockets in Front-mounting,
and Back-mounting Models,
Models available with finger protection OMRON The servo relay unit.
Hold-down Clips and Socket Bridges for PYF Sockets,
are also available.
New screwless models available. No. of poles: 5.
Connection method: Screw-on.
Suitable cable dia: 4 mm (4 to 5).
Core conductor size: 0.18 to 0.75 mm.
Suitable sheath material: PVC, PE, PUR.
Straight Connectors.
Minimum order: 50.
Round Water-resistive Smartclick.
Connecttors That Reduce Installation Work XW2B-40J6-4A.
A newly developed lock mechanism that is compatible with round M12 connectors.
Simply insert the Connectors, then turn them approximately 1/8 of a turn to lock.
A positive click indicates loccking OMRON XW2B-40J6-4A.
Features the same degree of protection (IP67) as M12 connectors.
A full line-up of models is planned.
Connectors with Cables are UL approved.


...More relevant models >>>>