XW2Z-150H-1 Block Conversion Units (XW2@) to, OMRON XW2Z-150H-1

Cable with connector (1 to 2) /G79-I_-_-D1,
G79-O_-_-D1, G79-M_-_-D1.
Size: A, 750mm; B, 500mm.
Cable and loose wire cable with loose wire pressing connecting terminal,
Connector cable, MITSUBISHI motor produced PLC connection cable. Applicable model (typical example): MY4.
New Screwless Terminal Sockets Added OMRON XW2Z-150H-1.
for MY and G2R Relays.
Simplified wiring without tightening screws XW2Z-150H-1
Two wires can be independently wired for each terminal.
Coil terminals and contact terminals are completely separated,
in an organized wiring layout.
Release Levers and Nameplates are available (sold separately). Terminals: Push-In Plus terminal blocks.
Type: Input *1.
Points: 16.
Internal I/O circuit common: NPN (– common) OMRON XW2Z-150H-1.
Rated voltage: 24 VDC.
I/O Relay Terminals with 16 Points and,
Push-In Plus terminal blocks to,
Downsize Control Panels and Save Labor.
I/O Relay Terminals with 16 points to mount G2RV Slim I/O Relays.
Push-In Plus terminal blocks are used to save wiring work in,
comparison with traditional screw terminals. (Wiring time is,
reduced by 60%* in comparison with traditional screw terminals OMRON XW2Z-150H-1. ).
Work is reduced ever further with one-step cable connection to the PLC.
Diode provided for coil surge absorption.
Operation indicators for immediate recognition of I/O signal status.
Accepts G3RV Slim I/O SSRs.
DIN Track or screw mounting. Sensor type and wiring: 2-wire DC 1-4/without polarity 3-4.
Actuator wiring: --.
No. of ports: 4.
No. of I/O: 4 OMRON Connecting Cables for Connector-Terminal Block Conversion Units.
Simple Wiring of Sensor Actuators.
Greatly reduce wiring in combination with the Smartclick XS5 OMRON Connecting Cables for Connector-Terminal Block Conversion Units.
Insert the connector and turn 1/8 of a turn to lock the connectors.
Higher rated current to enable output applications.
Use previous M12 screw connectors. No. of cable cores: 4.
Item: Vibration-proof robot cable.
Cable connection direction: Straight OMRON Connecting Cables for Connector-Terminal Block Conversion Units.
Cable length L: 1 m. XW2Z-150H-1.
Small Round Water-resistive.
Connectors.
Water-resistive, compact connector meets IP67 requirements.
Conventional M8 screw-mounting models are available along with,
S8 snap-in models that connect and disconnect with one toucch OMRON XW2Z-150H-1.
Ideal for a wide variety of FA and OA applications.
Connectors on both cable ends require no harness work.
Some new M8 models with 3 or 5 poles.