ZC9CBFP21 Proface ZC9CBFP21 FP PLC series CPU connecting cable (2 m)

15 pin I/O joint (joint Ax1, joint Bx1) and 6 pin I/O connector (joint Cx 1, connector Dx1). Note: joints A and B are different, the joints C and D different.Connector for connecting a serial port (1)Used to interface the main machine output serial port (D-sub 9 pin concave type) directly connected to the RS-422 terminal block Proface ZC9CBFP21. Input / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point PNP transistor output128MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card ZC9CBFP21The man-machine interface directly connected MITSUBISHI electric PLC QnA series A/ CPU programming port.Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00) Proface ZC9CBFP21. Touch screen anti ultraviolet protective film (1 pieces).Stop pin, prevent cable connection loose USB cable fastening clip (Type-A*1 USB, Mini-B, each 1 interface), used to adjust the thickness of the mounting panel 2mm gasket (1 pieces).Touch screen anti ultraviolet protective film (1 pieces).Connector for connecting DC power cord (5 / set).Adapter for EX module (5 / set)The PC adapter for PCMCIA slot read CF card required Proface ZC9CBFP21. 12.1 inch /10.4 inch (STN), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).For 3.8 inch models, connect the connector to the DIO interface. For connecting external I/O devices Proface FP PLC series CPU connecting cable (2 m). (5 / set)For 5.7 inch models, for the 5.7 inch man-machine interface into the LT series (A/B/B+/C/H Type) of the opening Proface FP PLC series CPU connecting cable (2 m). The man-machine interface directly connected MITSUBISHI electric PLC Q series CPU programming port.USB cable clamp for preventing disconnection of connection (5 / set)3.4 Inch Touch Screen anti UV protective film (1 pieces).Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceB/B+/C FLEX NETWORK Type connector (5)10 Proface FP PLC series CPU connecting cable (2 m). 4 inchhes and above, used to connect the power cord (5 / set) ZC9CBFP21. The MITSUBISHI A series PLC is connected to GP, length: 5 m.12 way 4 digital signals into analog signals and output resultsA veneer, for the GP4000 series back loading models of full flush (white, 1)When the man-machine interface is installed to the fixed panel for providing dust proof and moisture proof function (1 pieces) Proface ZC9CBFP21.