Home
>> Products
>> OMRON
>> Sensor
>> Displacement sensor/Length measuring sensor
>> high precision displacement sensor
>> ZW-S07 OMRON ZW-S07
ZW-S07 OMRON ZW-S07
Brand:
OMRON
Name: Sensor Head
Model: ZW-S07
Measuring range: 7±0.3mm.
Spot diameter: 18µm dia.
Static resolution: 0.25µm.
To achieve a compact Sensor Head and high-resolution measurements,
the ZW Series uses a white light confocal principle to detect objects.
This principle is described below.
...More relevant models >>>>
Name: Sensor Head
Model: ZW-S07
Measuring range: 7±0.3mm.
Spot diameter: 18µm dia.
Static resolution: 0.25µm.
To achieve a compact Sensor Head and high-resolution measurements,
the ZW Series uses a white light confocal principle to detect objects.
This principle is described below.
Detection Distance of 100 mm for.
Both Ferrous and Non-ferrous.
Substances.
Ultra long-distance detection of 100 mm for both ferrous and,
non-ferrous substances.
Models also available for use under water. Size: 6 dia.
Type: Low measurement type.
Sensing distance: 4 mm.
Resolution (See note.): 0 OMRON ZW-S07. 1 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website ZW-S07 Fitting materials: Stainless steel (SUS304).
Count: 1.
Accessories: Description, Holder (upper) Holder,
(lower) Pipe Bolts M4 × 12 with Hexagonal holes,
Bolts M4 × 30 with hexagonal holes,
Phillips screws M3 × 12 (with spring and plain washers),
Spring washer M4 Plain washer M4 Nuts M4;
Material, Heat-resistant ABS resin, 66 nylon,
Stainless steel (SUS304), Iron, nickel plating,
Iron, nickel plating, Stainless steel (SUS304),
Iron, nickel plating, Iron, nickel plating,
Iron, nickel plating; Count, 1, 1, 1, 2, 1, 2, 1, 1, 3 OMRON ZW-S07.
Applicable sensor (mounting pitch on sensor side): E3Z (25.4) E39-R1/E39-R3.
Page: Dimensions, 9. Inductive Profoximity Sensor with OMRON ZW-S07.
Chemical-resistant Fluororesin Case.
Housing and mounting are made of Fluororesin resistant to chemicals.
Maximum sensing distance: 10 mm. The ultra small size, high performance and rich models.
5.5mm ultra small built-in amplifier OMRON Sensor Head .
Maximum detection distance 2.5mm. Workpiece shaking can also be stable detection.
Response frequency 1kHz.
Low consumption current.
Category: DC 3 wire type OMRON Sensor Head .
Shape: non shield.
Detection surface: above.
Detection range: 2.5mm.
Output form: PNP.
Action mode: NO. Fixed type barcode reader of ultra small, low cost and high dependence on CCD.Size: M12 (brass), two times the distance type, shielding type.
Detection range: 4mm.
Connection mode: lead type (cable length is 2M and 5m two) OMRON Sensor Head .
Thread length: long thread type.
Output type: NPN.
Action mode NC.
Set up the new standard of the world economy proximity sensor.
OMRON as a pioneer and leader in proximity sensor industry,
Now bring you a new E2B proximity sensor with high performance to price rattio ZW-S07.
This series of products are complete,
Aimed at reasonable prices to meet customer demand for high quality and high reliability of the sensor.
We have tested the product not only on the protection level (IP67) specific item,
Thee oil spray test was carried out on the condition of the work site OMRON ZW-S07.
Simulation test was carried out in the environment of high oil mist concentration.
Both Ferrous and Non-ferrous.
Substances.
Ultra long-distance detection of 100 mm for both ferrous and,
non-ferrous substances.
Models also available for use under water. Size: 6 dia.
Type: Low measurement type.
Sensing distance: 4 mm.
Resolution (See note.): 0 OMRON ZW-S07. 1 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website ZW-S07 Fitting materials: Stainless steel (SUS304).
Count: 1.
Accessories: Description, Holder (upper) Holder,
(lower) Pipe Bolts M4 × 12 with Hexagonal holes,
Bolts M4 × 30 with hexagonal holes,
Phillips screws M3 × 12 (with spring and plain washers),
Spring washer M4 Plain washer M4 Nuts M4;
Material, Heat-resistant ABS resin, 66 nylon,
Stainless steel (SUS304), Iron, nickel plating,
Iron, nickel plating, Stainless steel (SUS304),
Iron, nickel plating, Iron, nickel plating,
Iron, nickel plating; Count, 1, 1, 1, 2, 1, 2, 1, 1, 3 OMRON ZW-S07.
Applicable sensor (mounting pitch on sensor side): E3Z (25.4) E39-R1/E39-R3.
Page: Dimensions, 9. Inductive Profoximity Sensor with OMRON ZW-S07.
Chemical-resistant Fluororesin Case.
Housing and mounting are made of Fluororesin resistant to chemicals.
Maximum sensing distance: 10 mm. The ultra small size, high performance and rich models.
5.5mm ultra small built-in amplifier OMRON Sensor Head .
Maximum detection distance 2.5mm. Workpiece shaking can also be stable detection.
Response frequency 1kHz.
Low consumption current.
Category: DC 3 wire type OMRON Sensor Head .
Shape: non shield.
Detection surface: above.
Detection range: 2.5mm.
Output form: PNP.
Action mode: NO. Fixed type barcode reader of ultra small, low cost and high dependence on CCD.Size: M12 (brass), two times the distance type, shielding type.
Detection range: 4mm.
Connection mode: lead type (cable length is 2M and 5m two) OMRON Sensor Head .
Thread length: long thread type.
Output type: NPN.
Action mode NC.
Set up the new standard of the world economy proximity sensor.
OMRON as a pioneer and leader in proximity sensor industry,
Now bring you a new E2B proximity sensor with high performance to price rattio ZW-S07.
This series of products are complete,
Aimed at reasonable prices to meet customer demand for high quality and high reliability of the sensor.
We have tested the product not only on the protection level (IP67) specific item,
Thee oil spray test was carried out on the condition of the work site OMRON ZW-S07.
Simulation test was carried out in the environment of high oil mist concentration.
...More relevant models >>>>
Last one: 
next one: Related download