CNC MELDAS 60/60S Series CONNECTION AND MAINTENANCE MANUAL MITSUBISHI MELDAS 60/60S Series Manual

MITSUBISHI motor universal AC servo amplifier MELSERVO-J3 series.
Rated output: 11.0kw.
Interface type: SSCNET type III fiber communication.
Special specification: suitable for linear servo motor.
Power specification: three phase AC200V.
More advanced real-time automatic tuning by setting response values,
Including the position gain and the gain of speed, all the gain can be adjusted automatically MELDAS 60/60S Series CONNECTION AND MAINTENANCE MANUAL MELDAS 60/60S Series
32 segment response level can be set.
Advanced vibration suppression control.
An optimal vibration control filter value is automatically set by the automatic tuning function to effectively suppress the vibration of the 100Hz frequency that occurs when the driving part stops.
The automatic tuning function can effectively restrain the vibration of the end of the mechanical arm and reduce the residual vibration in the machine MELDAS 60/60S Series CONNECTION AND MAINTENANCE MANUAL. Cable length: 3m.
(for MR-J2S- / CP (1) -S084).
For MR-J2S-11KA (4) MR-J2S-22KA to (4). MITSUBISHI motor universal AC servo amplifier MELSERVO-J3 series.
Rated output: 22.0kw.
Interface type: CC-Link communication type (built-in positioning function).
Power specification: three phase AC400V MELDAS 60/60S Series CONNECTION AND MAINTENANCE MANUAL.
Positioning operation by setting position and rotational speed data in the positioning table and receiving the start signal from the main controller.
The setting of the position and speed of the positioning table, as well as the start and stop operation can be completed through CC-Link communication MITSUBISHI MELDAS 60/60S Series Manual MITSUBISHI MELDAS 60/60S Series Manual.
By using the MR-J3-D01 extension IO unit, the DI/O instruction can be used to select and locate the table.
(CC-Link can not be used for MR-J3-D01 communications).
With built-in positioning function of the servo amplifier, can be set through the CC-Link communications and speed data. (corresponding to the CC-Link version: Ver MITSUBISHI MELDAS 60/60S Series Manual. 1.10)
Can be achieved through the CC-Link communications to start, stop and monitoring and other operations.
Serial communication redduce wiring MELDAS 60/60S Series .
Distributed servo control system can be built by CC-Link communication.
The parameters of unit MR-PRU03 (optional) the parameter setting, operation and monitoring more convenient.

The servo amplifier can be used for speed control operation MELDAS 60/60S Series CONNECTION AND MAINTENANCE MANUAL.
When the two stations are occupied, the speed can be set directly by the remote register.