CRT1-OD16SY Manual OMRON CRT1-OD16SY UL Standards and CSA Standards

Model: C200H-OD217.
No. of points: 12 pts.
Specifications: 5 to 24 VDC. source type (PNP).Number of outputs: 32 pts.
Max. switch-ing capacity: 16 mA at 4.5 V DC to 100 mA at 26.4 V.
External connector: Connector.
Weight: 180 g max.Unit type: CS1 Special I/O Units.
Product name: Isolated-type,
Thermocouple Input Units OMRON CRT1-OD16SY UL Standards and CSA Standards.
points Input: 4 inputs.
Signal range selection:
Set separately for each input CRT1-OD16SY
I/O type: B, E, J, K, N, R, S, T, ±80mV.
Conversion speed: 150 ms/4 inputs.
Externa connection: Removable erminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.15A; 26V, 0.15A.
Standards: UC1, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices OMRON CRT1-OD16SY UL Standards and CSA Standards.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value.
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them OMRON CRT1-OD16SY UL Standards and CSA Standards.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and space compared,
with previous systems.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring.
systems can be constructed,
or the Units can be used together with LCBs/LCUs,
to construct complete process control systems.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools. High-speed Counter Unit
A High-speed Counter Unit counts input signals from incremental rotary encoders or other sources.

Name: High-speed Counter Module.
Model: C200H-CT002.
Number of axes: 1 axis/Unit.
Operating modes: 6.Specifications: Coaxial cable(5C-2V cable).Model : CV1000-DM641.
Available CV1000/2000/CVM1-CPU21-V2.
64K words.Output method: Analog resolution: 1/6000.
Analog Inputs: 4.Unit type: CJ1 Basic I/O Units.
Product name: Transistor Output Units.
Specifications: Output type, Sinking;
I/O points, 32 outputs(High speed);
Maximum switching capacity, 24VDC, 0.5A;
Commons, 16 points, 1 common;
External connection, MIL connector.
No. of words allocated: 2 words.
Current coonsumption: 5V, 0 CRT1-OD16SY Manual. 22A; 24V, --.
Standards: N, L, CE.
A Wide Range of Basic Output,
Units for High Speed Output,
and Different Applications.
These Output Units receive the ,
results of output instructions ,
from the CPU UUnit and perform ON/OFF,
control for external devices CRT1-OD16SY Manual.
High-speed Output models CJ1W-OD213 and,
CJ1W-OD234 can help to increase system.
throughput.