CS1G-CPU43-V1 Manual OMRON PLC CS1G-CPU43-V1 Communications Commands REFERENCE MANUAL

C1000H-SL SYSMAC BUS SYSMAC LINK C1000H-SLK21.Unit classification: CJ1 Special I/O Units.
Product name: Temperature Control Units.
Specifications; No. of loops: 2 loops,
heater burnout detection function;
Temperature sensor inputs: Platinum ,
resistance thermometer input(JPt100, Pt100);
Control outputs: Open collector,
NPN outputs (pulses) OMRON PLC REFERENCE MANUAL.
No. of unit numbers allocated: 2 CS1G-CPU43-V1
Current consumption: 5V, 0.25A; 24V, --.
Standards: UC1, N, L, CE.
A Single Unit Performing All the Functions of,
4 Temperature Controllers.
A Special I/O Unit with direct input,
of thermocouple or resistance thermometer,
PID control with 2 degrees of freedom,
and open collector output. Unit type: CS1 Special I/O Units OMRON PLC REFERENCE MANUAL.
Product name: Isolated-type,
Thermocouple Input Units.
points Input: 8 inputs.
Signal range selection:
Set separately for each input.
I/O type: R, S, K, J, T, L, B.
Conversion speed: 250 ms/8 inputs.
Externa connection: Removable erminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.18A; 26V, 0.06A.
Standards: UC1, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices OMRON PLC REFERENCE MANUAL.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value CS1G-CPU43-V1 REFERENCE MANUAL.
Because of this, no ladder program is required,
at the CPU Unit for scaling CS1G-CPU43-V1 REFERENCE MANUAL.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and space compared,
with previous systems CS1G-CPU43-V1 REFERENCE MANUAL.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring.
systems can be constructed,
or the Units can be used together with LCBs/LCUs,
to construct complete process control systems.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools. Power supply voltage: AC100 ~ 120V, AC200 ~ 240V.
Note: can be switched.
Comply with EU directives.
Can only be used for C200H-CPU series and C200HS-CPU series.
Co creation will be able to track the market speed of the production site.
In order to build a more convenient system for the user and the sales department.
OMRON actively promote the field of information and standardization.
The Windows version of the ladder program as a tool in the windows environment of unity.
In addition to Ethernet, the communication protocol macro function must be provided in accordance with DeviceNet/D.
As a result of this kind of environment is all ready, just realized one call that is out, quickly adapt to the market changes of the production environment.
Improve reliability, strengthen the function to a new generation.
Due to the production site more complex, high speed, the user''s demand is also increasingly diverse.
To this ennd, it is required to improve the basic performance of C200HG/C200HE/C200HX, improve the processing speed and so on CS1G-CPU43-V1 Manual.
Production site requirements of high performance, high standards, and constantly upgrading!
The creation of the modern manufacturing industry, the strict requirements of OMRON,
Always take the latest products and scientific concepts to the production site OMRON PLC REFERENCE MANUAL.