OMRON CP1L-M60DT1-D Communications Commands REFERENCE MANUAL

Name: Three-tier Screw Terminal Block.
Specifications: Outputs; 8 outputs; NPN;
With Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system CP1L-M60DT1-D Communications Commands.
A wide variety of CompoNet Slave Units,
contribute to system size reduction CP1L-M60DT1-D
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Unit type: CS1 Special I/O Units.
Product name: Isolated-type,
Thermocouple Input Units CP1L-M60DT1-D Communications Commands.
points Input: 4 inputs.
Signal range selection:
Set separately for each input.
I/O type: R, S, K, J, T, L, B.
Conversion speed: 250 ms/4 inputs.
Externa connection: Removable erminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.25A; 26V, --.
Standards: UC1, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices CP1L-M60DT1-D Communications Commands.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value.
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and space compared,
with previous systems.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring.
systems can be constructed,
or the Units can be used together with LCBs/LCUs,
to construct complete process control systems.
Parameters cann be easily displayed and set in an,
easy-to-understand form without special tools CP1L-M60DT1-D REFERENCE MANUAL. Required for Analog Input and Output Units: For two Analog Units.I/O capacity/Mountable Units(Expansion Racks): 2, 560 points/40 Uniits (3 Expansion Racks max CP1L-M60DT1-D REFERENCE MANUAL. ).
Program capacity: 250K steps.
Data memory capacity: 448K words(DM: 32K words, EM: 32K words × 13 bank).
LD instructi