LK Automation Limited
Home >> Download >> OMRON >> Manual Download >> OMRON DRT2-TS04P INSTRUCTION Manual

OMRON DRT2-TS04P INSTRUCTION Manual

Product model: DRT2-TS04P
Name: remote i/o terminal
Brand: OMRON
Sort: INSTRUCTION Manual
File language: English
File size: 0.36MB
Ratings: 1 A at 125 VAC.
LED indicator: Without indicator.
Actuator: Sealed pin plunger.
Many Models Including Roller Lever.
Switches are Only 16-mm Thick with Connector.
New center roller lever models that enable ganged mounting.
of up to 6 Switches.
Cable connectors for easy Switch replacement DRT2-TS04P .
Triple-seal construction to provide IEC IP67 degree of protection.
Operation indicators available for easy monitoring,
(standard indicator is lit when Switch is not operating) DRT2-TS04P
Approved by UL and CSA.
(Ask your OMRON representative for Information on approved models.) Head material: Plastic.
Release key position: Bottom.
Release key type: Standard (resin).
Solenoid voltage/indicator: Solenoid: 24 VDC, Orange LED: 10 to 115 VAC/VDC DRT2-TS04P .
Lock and release types: Mechanical lock Solenoid release.
Contact configuration(door open/closed detection switch and,
lockmonitor switch contacts)(slow-action) Certified direct,
opening NC contact: 2NC/1NO+1NC/1NO.
Conduit opening: M20.
Best-selling Guard Lock Safety-door.
Switch Available in Several.
Compact, Multi-contact Models.
Selectable Operation Key insertion direction and,
adjustable mounting ensure installation flexibility DRT2-TS04P .
Built-in switches with multiple-contact construction are available.
Key holding force of 1,300 N minimum.
Can be used for either standard loads or microloads.
Lineup includes models with a conduit size of M20.
IP67 degree of protection.
Variety of Metallic Heads Available. Type: Welding / wire type, with left column.
Drive rod: R blade Shibai rod type.
Terminal specifications: with wire, the left side.
Contact specifications: 1a.
The minimum size of the long stroke type can be reliably switch
The body part size is 78% of the previous generation product, which is beneficial to the miniaturization of the equipment.
No swing bars are also used for easy long stroke specifications (OT reference value: 1.4mm).
Without harmful substances to the environment, the lead type has also been lead-free. Release Key Type: Standard (metal).
Wiring method: Terminal block.
Solenoid voltage/Indicator: 24VDC (without indicator).
Lock and release type: Solenoid lock Mechanical release.
Contact configuration (door open/closed detection switch,
and lock monitor switch contacts): 4-contact Model,
Insert the built-in switch (A, B, C, D, S, T, U or V) into the blank @.
Conduit size (See Note.): 1/2-14NPT.
World''s smallest Class 6-contact Guard Lock.
Safety-door Switch.
.
Wiring time is reduced with two types of wiring.
methods capable of one-touch attachment and removal.
A wide variety of built-in switches can be used for various devices.
(4-, 5-, and 6-contact models are available).
Key holding force of 1,300 N.
It is possible to change the key insertion point. DRT2-TS04P INSTRUCTION Manual.
without detaching the head.
Drive solenoids directly from the Controller.
.
Lockout Key to prevent workers from becoming.
trapped inside the hazardous area.
The vertical D4SL Guard Lockk Safety-door Switch,
can be easily mounted on 40 × 40 mm aluminum frames DRT2-TS04P INSTRUCTION Manual.
The plastic material makes the Slide Key suitable,
for lightweight doors.
Related products
OMRON
Board Terminals with MIL Connector
DRT2-OD32BV-1
OMRON Board Terminals with MIL Connector DRT2-OD32BV-1
Specifications: Outputs, PNP common, 32 o
OMRON
Screw-less Clamp Terminals with Transistors
DRT2-ID16SLH
OMRON Screw-less Clamp Terminals with Transistors DRT2-ID16SLH
Short/disconnection detection: Supported. Sp
OMRON
Board Terminals with MIL Connector
DRT2-MD32BV
OMRON Board Terminals with MIL Connector DRT2-MD32BV
Specifications: I/O, NPN input: common, ou
OMRON
Board Terminals with MIL Connector
DRT2-MD32B-1
OMRON Board Terminals with MIL Connector DRT2-MD32B-1
Specifications: I/O, PNP input: - common, ou