LK Automation Limited
Home >> Download >> OMRON >> Manual Download >> PLC CJ2H-CPU67-EIP INSTRUCTIONS REFERENCE MANUAL OMRON CJ2H-CPU67-EIP Manual

PLC CJ2H-CPU67-EIP INSTRUCTIONS REFERENCE MANUAL OMRON CJ2H-CPU67-EIP Manual

Product model: CJ2H-CPU67-EIP
Name: PLC
Brand: OMRON
Sort: INSTRUCTIONS REFERENCE MANUAL
File language: English
File size: 51.06MB
Name: Connector.
Model: C200H-CE001.Programmed using the Fuzzy Support Software. Up to 8 inputs and 4 outputs.Unit classification: CJ1 Special I/O Units.
Product name: Position Control Units,
(High Speed type).
Specifications; Control method/Control,
output interface:Pulse-train line-driver,
output with Pulse Counter Function;
Number of control axes : 2 axes CJ2H-CPU67-EIP INSTRUCTIONS REFERENCE MANUAL CJ2H-CPU67-EIP
No. of unit numbers allocated: 2.
Current consumption: 5V, 0.27A; 24V, --.
Standards: UC1, CE.
Motion Control Capabilities with Unit,
Synchronization and Even Higher Speed.
Models are available with 2 or 4 axes,
and open-collector or line-driver outputs.
The CJ1W-NC214/NC414 have open-collector outputs,
and the CJ1W-NC234/NC434 have line-driver outputs CJ2H-CPU67-EIP INSTRUCTIONS REFERENCE MANUAL.
Control 2 or 4 Axes High-speed, high-resolution,
position control is possible for servomotors ,
and pulse motors, and even linear motors,
and direct drive motors. Model: C500-CN122N.
Cable length 1m.
CV Series C Series Expansion ← → I / O device CPU Connecting cable(Vertical-wired)Name: Bit Slave Units with e-CON Connectors.
Specifications: Inputs; 2 inputs; NPN CJ2H-CPU67-EIP INSTRUCTIONS REFERENCE MANUAL.
Simple and Intelligent Bit Slaves,
with Industry-standard e-CON connectors.
Slave Units capable of 2-point bit-level distribution.
The I/O power supply is supplied from the communications,
power in the previously connected flat cable, and has a,
short-circuit detection function for protection OMRON CJ2H-CPU67-EIP Manual.
Industry-standard e-CON connectors OMRON CJ2H-CPU67-EIP Manual.
Short-circuit protection safeguards the network,
from I/O short circuits.
Simple communications connections,
with flat cable and connectors.
Bit-level distribution to support,
essentially any application. Unit type: CS1 Special I/O Units.
Name: CompoBus/S Master Unit.
Specifications: Communications,
functions, Remote I/O communications;
No OMRON CJ2H-CPU67-EIP Manual. of I/O points, 256 max.
(128 inputs and 128 outputs), 128 max.
(64 inputs and 64 outputs);
Max. Units mountable per CPU Unit, 95, 96.
No. of unit numbers allocated: 2; 1.
Current consumption: 5V, 0.15A; 26V, --.
Standards: U, C, CE.
CompoBus/S is a high-speed I/O bus. Name: Clamp Terminal Blocks.
Specifications: Inputs; 8 inputs ; PNP; --.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system CJ2H-CPU67-EIP .
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on sitee CJ2H-CPU67-EIP INSTRUCTIONS REFERENCE MANUAL.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error.
Related products
OMRON
Programmable Controllers
CJ2H-CPU67-EIP
OMRON Programmable Controllers CJ2H-CPU67-EIP
Product name: CJ2H Built-in EtherNet/IP CP
OMRON
Programmable Controllers
CJ2H-CPU68
OMRON Programmable Controllers CJ2H-CPU68
Product name: CJ2H CPU Units. Specification
OMRON
Programmable Controllers
CJ2H-CPU64
OMRON Programmable Controllers CJ2H-CPU64
Product name: CJ2H CPU Units. Specification
OMRON
Programmable Controllers
CJ2H-CPU68-EIP
OMRON Programmable Controllers CJ2H-CPU68-EIP
Product name: CJ2H Built-in EtherNet/IP CP