PLC FX1S-20MR-ES/UL Manual MITSUBISHI FX1S-20MR-ES/UL PROGRAMMING MANUAL II

Length: 1.5m.
Specification: FX round connector. Cable length: 0.5m.
RS-485 terminal unit conversion unit.
Applicable model: GT16. Built in analog input models.
Input / output points: 30 points.
Power supply: AC100-240V.
Input points: 16 points.
Output points: 14 points.
Output form: relay output.
Power consumption: 21W FX1S-20MR-ES/UL Manual.
Weight: 0.45KG.
Outline dimension: 100x90x49mm.
Built in CPU, power supply, input and output FX1S-20MR-ES/UL
Keep FX1S compact body, while adding more features.
Special adaptor and function expansion board can be installed and used FX3 series.
High speed operation.
Basic instructions: 0.21 s/ instruction
Application instruction: 0.5 s/ instruction
Large capacity memory.
Built in program memory 4000 steps FX1S-20MR-ES/UL Manual.
No battery.
Auxiliary relay: 1536 points.
Timer: 138 points.
Counter: 67.
Data register: 3000.
A new application model.
FX3SA is a basic model on the basis of the basic performance of the FX1S increased the expansion of the new models.
FX3SA is suitable for all kinds of fields, such as analog quantity, Ethernet, MODBUS function, small scale equipment and so on.
Basic models suitable for small scale control FX1S-20MR-ES/UL Manual.
Compact but powerful,
At the same time, the analog quantity and the communication function and so on. Length: 0.3m.
Specification: FX round connector, FX square connector. Input points: 32 points
Input mode: DC24V (drain type).
Connection status: connector.
In order to extend the input output of the device MITSUBISHI FX1S-20MR-ES/UL PROGRAMMING MANUAL II.
Also has a built-in power supply products.
The maximum number of points for the input and output is 256 MITSUBISHI FX1S-20MR-ES/UL PROGRAMMING MANUAL II.
Expansion module: up to 16 units (in addition to the power expansion module)
The total number of CC-Link, AnyWireASLINK, and Bitty series of remote I/O is 512 points. Power: 55kw.
Purpose: to suppress the power harmonics.
Improve the power factor, reduce the input side of the high harmonic current MITSUBISHI FX1S-20MR-ES/UL PROGRAMMING MANUAL II.
Make sure that this option is installed in the FR--A820-03800 (75K) and FR-A840-02160 (75K) and above capacity and above capacity FX1S-20MR-ES/UL .
At the same time the installation options in the use of 75kW and above motor. (the IP55 series has a built-in DC reactor.)
According to the motorr power used to select the DC reactor FX1S-20MR-ES/UL Manual.
(when the inverter capacity is greater than the motor capacity, is still based on the motor capacity to choose.)