PLC FX3G-24MT/ESS Positioning Control Edition USER'S MANUAL MITSUBISHI FX3G-24MT/ESS Manual

Power: 280kw.
Voltage: 400V.
The power factor of the input power factor is up to 0.99 and above (100% load).
Can be connected to multiple inverters, to achieve a common DC bus mode.
Equipped with standard power retrogradation function. Output points: 16 points.
SCR output type. MITSUBISHI inverter FR-A740 series FX3G-24MT/ESS USER'S MANUAL.
Voltage level: 3 phase 400V.
Frequency converter capacity: 0 FX3G-24MT/ESS75KW.
FR-A700 converter products are suitable for all kinds of high load requirements of the equipment.
Such as lifting, lift, printing and dyeing, printing and dyeing, material coiling and other general occasions.
High level driving performance.
Unique sensorless vector control mode,
A wide variety of mechanical equipment can be operated at high precision in the super low speed region without the need of the encoder FX3G-24MT/ESS USER'S MANUAL.
With torque control mode,
And in the speed control mode can use the torque limit function.
With vector control function (with encoder),
Frequency converter can achieve position control and fast response, high precision speed control (zero speed control, servo lock, etc.) and torque control. Max input / output points: 64 points FX3G-24MT/ESS USER'S MANUAL.
Supply voltage: 100 - 240VAC.
Input points: 32 points.
Output points: 32 points.
Output type: relay.
Power consumption: 60VA.
Weight (kg):1.0.
Size (WxHxD) mm:220x90x87.
Note recording function, Component annotation can be recorded in the program register MITSUBISHI FX3G-24MT/ESS Manual.
Online program editor, online change the program will not lose the working hours or stop production operation MITSUBISHI FX3G-24MT/ESS Manual.
RUN/STOP switch, running on panel / stop switch easy to operate.
Remote maintenance, remote programming software can monitor, upload or uninstall programs and data via modem communications
Password protection, using a eight digit password to protect your program.
Clock function and hour meter function, all of the PLC FX2N has a real-time clock standard MITSUBISHI FX3G-24MT/ESS Manual.
Continuous scanniing function, to define the operation cycle for the application of the continuous scan time FX3G-24MT/ESS Positioning Control Edition.
Input filter adjustment function, you can use the input filter to smooth the input signal (in the basic unit x000 to x017). A 200 pin connector is installed on one side of the loose line FX3G-24MT/ESS USER'S MANUAL.
Length 5M. Function extension board for RS-422 communication.
DC5V power consumption: 20mA.