Type: Cable with Connectors on Both Ends (RJ45/RJ45).
Category: Cat.6a .
Cable sheath material: LSZH.
Cable color: Yellow.
Cable lengt: 1.5 m.
Cables and Connectors for,
EtherCAT® and Other Industrial,
Ethernet Networks. Actuator: Sealed (Booted); Sealed plunger; DC.
Mounting: Diagonal side mounting OMRON XWT-OD16-1 INSTRUCTION Manual.
General-purpose Enclosed.
Switches with High Breaking
XWT-OD16-1
Capacity and High Durability.
Z General-purpose Basic Switches are built into ZE, ZV,
and ZV2 Switches. They provided high durability and high,
breaking capacity.
X Basic Switches with magnetic blowout are built into XE,
XV, and XV2 Switches. DC models have also been added,
to the series.
Three mounting methods (side, base, and diagonal side),
and many types of actuator are available OMRON XWT-OD16-1 INSTRUCTION Manual.
Terminals face the front when the cover is removed for,
easy connection.
Switches with ground terminals have CE marking.
Approved by UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)No. of cable cores: 4.
Item: Standard SUS316L cable lock.
Cable connection direction: Right-angle OMRON XWT-OD16-1 INSTRUCTION Manual.
Cable length L: 5 m.
Small Round Water-resistive.
Connectors.
Water-resistive, compact connector meets IP67 requirements.
Conventional M8 screw-mounting models are available along with,
S8 snap-in models that connect and disconnect with one touch.
Ideal for a wide variety of FA and OA applications.
Connectors on both cable ends require no harness work.
Some new M8 models with 3 or 5 poles. Cable type: Standard Cables.
Type: Cable with Plug on One End (M12 Straight) .
Cable length: 0.5 m.
Cables and Connectors for,
EtherCAT® and Other Industrial,
Ethernet Networks. Mounted Connector: MR Plugs.
No. of poles: 50.
Dimension A: 184.
Dimension B: 144.
Mounted Connector model: MR-50RMD2 *3.
Cable Connector model: MR-50F *3.
New Slim Connector-Terminal Block,
Conversion Units.
Mounting area reduced by 35% (in comparison with,
40-pole XW2B Units) to contribute to downsizing,
controol panels and automatic equipment XWT-OD16-1 Manual.
Fallout prevention for terminal screws.
Round or forked crimp terminals can be used.
Mount to DIN Track or via screws.
Unique DIN Track lock can maintain open status,
during DIN Track attachmment and removal XWT-OD16-1 Manual.
Terminal cover can be locked open.
Screw terminals are arranged by color in groups,
of five to simplify counting terminal numbers.