H7ET-NV-H PDF catalog OMRON Self-powered Time Counter H7ET-NV-H datasheet PDF datasheet

Operating method: Incrementing, decrementing, and reversible (UP/DOWN A to F).
Mounting method: Flush mounting.
Input signal method (Count and reset inputs): Contact and transistor input, voltage (H and L).
Memory backup: Yes/No (Selectable using DIP switch).
Display: Yes (8-mm high 7-segment LED) OMRON Self-powered Time Counter PDF datasheet.
Models: 6 digits.
A DIN 72 x 72 mm Best-selling Counter H7ET-NV-H
Easy setting with thumbwheel switches.
A draw-out construction enables maintenance without rewiring.
Models with 2-, 4-, 6-, or 8-digit displays are also available.
Total Counter models are also Available.
Complies with UL and CSA Marking. Count input: PNP/NPN universal DC voltage input (4.5 to 30 VDC).
Display: 7-segment LCD.
Max OMRON Self-powered Time Counter PDF datasheet. revolutions displayed (applicable encoder resolution):
1000 s–1 (1 pulse/rev.), 1000 min–1 (60 pulse/rev.); Light-gray body.
Revolutions displayed up to five digits.
Dual revolution display according to encoder resolution used;
1000 s–1/1000 min–1 or 1000.0 s–1 /1000.0 min–1,
Switchable dual revolution display type available (-NV1 models);
extended up to 10000 min–1. Operating modes: Power OFF Delay OMRON Self-powered Time Counter PDF datasheet.
Supply voltage: 100 to 120 VAC.
Control output: Contact output: SPDT.
H3DK-H: S Series (time range: 0.1 to 12 s).
Set two time ranges with each Timer, from 0 H7ET-NV-H PDF datasheet. 1 to 12 seconds for,
the S Series and from 1.0 to 120 seconds for the L Series. Operation/resetting system: Time-limit operation/self-resetting.
Time-limit contact: DPDT (for power switching) H7ET-NV-H PDF datasheet.
Time ranges: 0.04 s to 3 h.
Supply voltage: 24, 100 to 120, 200 to 230, 240 VAC (50/60 Hz);
12, 24, 48, 125, 100 to 110 VDC.
Mounting: Surface/DIN-track mounting (with socket).
Miniature Timer Compatible with the MY Relay.
Semi-multi power supply voltage H7ET-NV-H PDF datasheet.
Large transparent time setting knob facilitates time setting.
A flat-blade and Phillips screwdriver can also be used for time setting.
Pin configuration compatible with MY Power Relay.
LED indication for power and output statuses.
Confoorms to EMC standards H7ET-NV-H PDF catalog.
Conforms to EN 61812-1 and approved by UL and CSA. Operating modes: Power OFF Delay.
Supply voltage: 200 to 240 VAC.
Control output: Contact output: SPDT.
H3DK-H: L Series (tiime range: 1 OMRON Self-powered Time Counter PDF datasheet. 0 to 120 s).
Set two time ranges with each Timer, from 0.1 to 12 seconds for,
the S Series and from 1.0 to 120 seconds for the L Series.