CA3-ADPTRM-01 Manual Proface CA3-ADPTRM-01 User's Manual

COM1 interface with the cable (RS-232C), used to connect directly to the CPU series PLC FX (not the same time using the programming controller)COM1 interface with the cable for direct connection to the CPU series PLC AUsed to connect the SIEMENS S5 PLC series to the host computer interfaceCOM2 terminal adapter for communication through the RS-422/485 connectionEngineering documents created by the LT interface to download images and logic programming software through the USB interface Proface CA3-ADPTRM-01 User's Manual CA3-ADPTRM-01 10.4 inches and above, used to connect the power cord (5 / set).5.7 inches, GP installed to the hard panel to provide dust and moisture proof function.15 inches, replaced by a host of backlight (1).13 pin input connectors for HTB and 16 pin output connectors Proface CA3-ADPTRM-01 User's Manual. (1 / set)Touch panel operation for RGB input modules (Master - from: Mini-B)USB cable to prevent disconnection of the fastening clip (5 / set)Used to convert the USB interface to the serial interface (RS-232C). A modem or bar code reader that can be connected to support RS-232C.Extended cable for connecting USB (Type-A) (LT) interface.For 5.7 inch models, for the 5 Proface CA3-ADPTRM-01 User's Manual. 7 inch man-machine interface into the LT series (A/B/B+/C/H Type) of the opening.USB cable clamp for preventing disconnection of connection (5 / set)For 5.7 inch models, prevent cable loose from the USB cable fastening clip (5 / set).1GB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.128MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.Used to convert RGB to DVI-AMounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.GP-230/250/270 series is replaced by ST series, the gap filled with the opening of the panelCOM1 interface with the cable (RS-232C), used to connect directly to the SYSMAC connection module (or other host)512MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card CA3-ADPTRM-01 Manual. 10.4 inches (TFT), the replacement of the host backlight (1).10.4 inch TFT models applicable parts, for the 10 CA3-ADPTRM-01 Manual. 4 inch man machine interface (TFT) into the 10.4 inch GP2500 (TFT) in the installation of the required accessories.