CP1E-N60DR-D Manual OMRON PLC CP1E-N60DR-D Software PROGRAMMING MANUAL

Name: Analog I/O Slave Units,
(Numerical indicator type)
e-CON Connector Type.
Specifications: Analog inputs.
(Channel Insulation); 2 inputs.
Standards: CE.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced OMRON PLC PROGRAMMING MANUAL.
Bit-level I/O distribution reduces,
wiring in the system CP1E-N60DR-D
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Model: C200H-OA223 OMRON PLC PROGRAMMING MANUAL.
No. of points: 8 pts.
Specifications: 1.2A, 250VAC.Unit type: CS1 Special I/O Units.
Product name: Analog Input Unit (100 mV).
Input points : 8 inputs.
Signal range: 0 to 100 mV, ±100 mV.
Conversion speed (resolution):
200ms/8 inputs.
Externa connection: Removable erminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.15A; 26V, 0.08A.
Standards: UC1, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices OMRON PLC PROGRAMMING MANUAL.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value CP1E-N60DR-D PROGRAMMING MANUAL.
Because of this, no ladder program is required,
at the CPU Unit for scaling CP1E-N60DR-D PROGRAMMING MANUAL.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and space compared,
with previous systems CP1E-N60DR-D PROGRAMMING MANUAL.
High-resolution Models and 8-point Input Models are,
also available.
By combining thhe Units, logging/monitoring CP1E-N60DR-D Manual.
systems can be constructed,
or the Units can be used together with LCBs/LCUs,
to construct complete process control systems.
Parameters can be easily displayed and set in an,
easy-to-unnderstand form without special tools OMRON PLC PROGRAMMING MANUAL. C500-DA/3G2A5-DA Special I/O Unit Analog Output C500-DA004(3G2A5-DA004).
Output: 2 pts.
Specification: -10~+10V.