K2CM-2HV Manual OMRON Digital Temperature Controllers K2CM-2HV Communications Manual

Input type: Platinum-resistance thermometer or thermocouple.
Supply voltage: 100 to 240 VAC.
Output: None.
Highly Visible LCD Display with 2-color (Red and Green) LEDs.
Wide input range - select from two types of platinum-resistance,
thermometers and ten types of thermocouples.
Front-panel key operation for easy setting OMRON Digital Temperature Controllers Communications Manual.
Average processing function suppresses flicker K2CM-2HV
Temperature input shift and temperature unit selection functions.
Easy confirmation of max/min display.
Short 80-mm depth (measured from edge of face plate).
Finger protective cover (standard equipment) protects against,
electric shock.
Water- and dust-proof NEMA4X (IP66 equivalent) front panel.
Recognized to conform to U OMRON Digital Temperature Controllers Communications Manual. S. and Canadian requirements under,
the Component Recognition Program of UL.
CE marking. Control supply voltage: 110/220 VAC; Without voltage fluctuation compensation.
Operating current: 0.5 to 1 A.
Accurate Detection of Heater Element.
Burnout Regardless of Heater Capacities.
Accurately detects a burned heater element or elements incor,
porated by a molding machine or packing machine and outputs,
an alarm signal OMRON Digital Temperature Controllers Communications Manual.
Precisely singles out the burned element even if one heater el,
ement among several heater elements has been burned out.
Applicable to small- to large-capacity heater elements K2CM-2HV Communications Manual.
All K2CU-F large-capacity, built-in current transformer models,
work with both single-phase and three-phase heaters K2CM-2HV Communications Manual.
Voltage fluctuation compensation function eliminates false,
alarms due to variations in the supply voltage. Type: Medium-sensitivity models.
Sensed current: 100 mA/200 mA (switchable).
Type: High-speed models.
Operating time: Less than 0.1 s.
Economical, Compact, High-performance,
DIN 48 × 48-mm Ground Fault Relay for Low,
Voltages K2CM-2HV Communications Manual.
Performs continuous monitoring and detection of ground faults,
in low-voltage circuits due to the deterioration of insulation in,
electrical devices.
Higher rreliability ensured with improved resistance to high-fre,
quency noise when used for inverter loads K2CM-2HV Manual.
Ground Fault Relays and through-type ZCTs (zero-phase current,
transformers) are mutuually compatible OMRON Digital Temperature Controllers Communications Manual.
The through-type ZCTs are equipped with test terminals,
allowing operation tests for Ground Fault Relays to be performed withease.